JVC KD-G827: More about this unit
More about this unit: JVC KD-G827
• When Alternative Frequency Reception
More about this unit
is activated (with AF selected), Network-
Tracking Reception is also activated
automatically. On the other hand, Network-
Basic operations
Tracking Reception cannot be deactivated
Turning on the power
without deactivating Alternative Frequency
Reception. (See pages 21 and 22.)
ENGLISH
• By pressing SRC on the unit, you can also
turn on the power. If the source is ready,
• TA Standby Reception and PTY Standby
playback also starts.
Reception will be temporarily canceled while
listening to an AM station.
Turning off the power
• If you want to know more about RDS, visit
• If you turn off the power while listening to a
«http://www.rds.org.uk».
disc, disc play will start from where playback
has been stopped previously, next time you
Disc operations
turn on the power.
– For MP3/WMA disc: Disc play will start
Caution for DualDisc playback
from the first track of the current folder if
• The Non-DVD side of a “DualDisc” does
a <jtw> file is included and Image Link is
not comply with the “Compact Disc Digital
activated (see page 20).
Audio” standard. Therefore, the use of Non-
DVD side of a DualDisc on this product may
Tuner operations
not be recommended.
Storing stations in memory
General
• During SSM search...
– All previously stored stations are erased and
• This unit has been designed to reproduce
stations are stored newly.
CDs/CD Texts, and CD-Rs (Recordable)/
– Received stations are preset in No. 1 (lowest
CD-RWs (Rewritable) in audio CD (CD-DA),
frequency) to No. 6 (highest frequency).
MP3 and WMA formats.
– When SSM is over, the station stored in
• If you change the source, playback also stops.
No. 1 will be automatically tuned in.
Next time you select the same playback source
• When storing a station manually, the
again, playback starts from where it has been
previously preset station is erased when a new
stopped previously.
station is stored in the same preset number.
Inserting a disc
FM RDS operations
• When a disc is inserted upside down, “Please
• Network-Tracking Reception requires
Eject” appears on the display. Press 0 to eject
two types of RDS signals—PI (Programme
the disc.
Identification) and AF (Alternative
• Do not insert 8 cm discs (single CD) and
Frequency) to work correctly. Without
unusual shape discs (heart, flower, etc.) into
receiving these data correctly, Network-
the loading slot.
Tracking Reception will not operate correctly.
• Receiving the Traffic Announcement by TA
Playing a disc
Standby Reception, the volume level (TA
• While playing an audio CD: If a title has been
VOL) automatically changes to the preset
assigned to the audio CD (see page 28), it will
level if the current level is lower than the
be shown on the display.
preset level.
• While fast-forwarding or reversing on an MP3
or WMA disc, you can only hear intermittent
sounds.
Continued on next page...
35
EN28-35KD-G827[EE]f.indd 35EN28-35KD-G827[EE]f.indd 35 12/23/05 9:52:47 AM12/23/05 9:52:47 AM
Playing a CD-R or CD-RW
• This unit can play back MP3/WMA files
meeting the conditions below:
• Use only “finalized” CD-Rs or CD-RWs.
– Bit rate: 8 kbps — 320 kbps
• This unit can play back only files of the same
– Sampling frequency:
type which are first detected if a disc includes
48 kHz, 44.1 kHz, 32 kHz (for MPEG-1)
both audio CD (CD-DA) files and MP3/
24 kHz, 22.05 kHz, 16 kHz (for MPEG-2)
WMA files.
ENGLISH
– Disc format: ISO 9660 Level 1/Level 2,
• This unit can play back multi-session discs;
Romeo, Joliet, Windows long file name
however, unclosed sessions will be skipped
• The maximum number of characters for file/
while playing.
folder names vary among the disc format used
• Some CD-Rs or CD-RWs may not be played
(includes 4 extension characters—<.mp3> or
back on this unit because of their disc
<.wma>).
characteristics, or for the following reasons:
– ISO 9660 Level 1: up to 12 characters
– Discs are dirty or scratched.
– ISO 9660 Level 2: up to 31 characters
– Moisture condensation occurs on the lens
– Romeo*: up to 128 (72) characters
inside the unit.
– Joliet*: up to 64 (36) characters
– The pickup lens inside the unit is dirty.
– Windows long file name*: up to 128 (72)
– CD-R/CD-RW on which the files are
characters
written with “Packet Write” method.
* The parenthetic figure is the maximum
– There are improper recording conditions
number of characters for file/folder names in
(missing data, etc.) or media conditions
case the total number of files and folders is
(stained, scratched, warped, etc.).
313 or more.
• CD-RWs may require a longer readout time
• This unit can play back files recorded in VBR
since the reflectance of CD-RWs is lower than
(variable bit rate).
that of regular CDs.
Files recorded in VBR have a discrepancy
• Do not use the following CD-Rs or CD-RWs:
in elapsed time display, and do not show
– Discs with stickers, labels, or a protective
the actual elapsed time. Especially, after
seal stuck to the surface.
performing the search function, this
– Discs on which labels can be directly
difference becomes noticeable.
printed by an ink jet printer.
• This unit can recognize a total of 512 files, of
Using these discs under high temperatures or
200 folders, and of 8 hierarchies.
high humidities may cause malfunctions or
• This unit cannot play back the following files:
damage to the unit.
– MP3 files encoded with MP3i and
MP3 PRO format.
Playing an MP3/WMA disc
– MP3 files encoded in an inappropriate
• This unit can play back MP3/WMA files
format.
with the extension code <.mp3> or <.wma>
– MP3 files encoded with Layer 1/2.
(regardless of the letter case—upper/lower).
– WMA files encoded with lossless,
• This unit can show the names of albums,
professional, and voice format.
artists (performer), and Tag (Version 1.0, 1.1,
– WMA files which are not based upon
2.2, 2.3, or 2.4) for MP3 files and for WMA
Windows Media
Audio.
®
files.
– WMA files copy-protected with DRM.
• This unit can display only one-byte
– Files which have the data such as WAVE,
characters. No other characters can be
ATRAC3, etc.
correctly displayed.
• The search function works but search speed is
not constant.
36
EN36-43KD-G827[EE]f.indd 36EN36-43KD-G827[EE]f.indd 36 12/23/05 9:53:28 AM12/23/05 9:53:28 AM
Playing MP3/WMA track from a USB memory
• If more than one <jtw> file are included in a
folder, a file with the youngest file number is
• While playing from a USB memory, the
used for Image Link.
playback order may differ from other players.
• This unit may be unable to play back some
Ejecting a disc
USB memories or some files due to their
characteristics or recording conditions.
• If the ejected disc is not removed within
ENGLISH
• Depending on the shape of the USB memories
15 seconds, the disc is automatically inserted
and connection ports, some USB memories
again into the loading slot to protect it from
may not be attached properly or the
dust. (Disc will not be played this time.)
connection might be loose.
• It is not recommended to use a USB memory
Sound adjustment
wider than 20 mm as it will block you from
General
pressing the 0 button.
• If the connected USB memory does not have
• If you are using a two-speaker system, set the
the correct files, “No Files” appears and the
fader level to the center (“00”).
unit returns to the previous source.
• Subwoofer out setting takes effect only when a
• This unit can show Tag (Version 1.0, 1.1, 2.2,
subwoofer is connected.
2.3, or 2.4) for MP3 files and for WMA files.
• You cannot change the input level—
• This unit can play back MP3/WMA files
“VolAdjust” of the FM stations. If you try to
meeting the conditions below:
adjust it for FM, “Fix” will appear.
– Bit rate:
MP3: 32 kbps — 320 kbps (MPEG-1)
Graphic display
8 kbps — 160 kbps (MPEG-2/2.5)
General
WMA: 5 kbps — 320 kbps
– Sampling frequency:
• You can display two sizes of pictures and
MP3: 48 kHz, 44.1 kHz, 32 kHz (MPEG-1)
animations.
24 kHz, 22.05 kHz, 16 kHz (MPEG-2)
– LARGE: <jtl> for still pictures and <jta> for
12 kHz, 11.025 kHz, 8 kHz
the animations;
(MPEG-2.5)
The image is displayed with the
WMA: 8 kHz — 48 kHz
dimension of the screen.
• This unit can play back MP3 files recorded in
– SMALL: <jtm> for still pictures and <jtb>
VBR (variable bit rate).
for animations;
• The maximum number of characters for
The image is displayed like a
folder and file names is 25 characters; 128
CD jacket (on the left side of the
characters for MP3/WMA tag information.
display).
• This unit can recognize a total of 2 500 files
• Depending on a downloaded file, it may take
and 250 folders (999 files per folder).
longer time to show it on the display.
Image Link
Downloading (or deleting) files
• Image Link will not work in the following
• You can download a file only while selecting
cases:
“CD” for the playback source; on the other
– If no <jtw> file is included in an MP3/
hand, you can delete a file while selecting any
WMA folder.
source.
– If Intro play is activated.
• After finishing the procedure to download a
– If the source is changed to another from
file, playback starts from the beginning.
“CD.”
Continued on next page...
37
EN36-43KD-G827[EE]f.indd 37EN36-43KD-G827[EE]f.indd 37 12/23/05 9:53:31 AM12/23/05 9:53:31 AM
• If you have already downloaded an animation,
• Titles assigned to discs in the CD changer can
downloading a new animation deletes the
also be shown if you play back the disc from
previously stored animation.
the unit and vice versa.
• It takes a long time to download an
animation.
Available characters on the display
– About 3 to 4 seconds for a still image (one
• This unit can display Romans alphabets
ENGLISH
frame).
(A – Z, a – z), Cyrillic alphabets, numbers,
– About 1 to 2 minutes for an animation of 30
and symbols (see below).
frames.
These characters are also used to show the
– About 3 minutes for an animation of 60
various information on the display.
frames.
• If you try to operate the downloading
Upper case (Cyrillic alphabets)
procedure from a disc without any <jtl>,
<jtm>, <jta>, and <jtb> files, beeps sound.
• If you try to store more than 30 images
for each size “LARGE” and “SMALL,”
“Picture Full” appears and you cannot start
Lower case (Cyrillic alphabets)
downloading. Delete unwanted files before
downloading.
• If the total frame number of an animation
downloaded exceeds 60, the frames exceeding
Numbers and symbols
that number are ignored.
General settings—PSM
• “Auto” setting for “Dimmer” may not work
correctly on some vehicles, particularly on
those having a control dial for dimming. In
iPod or D. player operations
this case, change the “Dimmer” setting to any
• When you turn on this unit, the iPod or
other than “Auto.”
D. player is charged through this unit.
• If “LCD Type” is set to “Auto,” the display
• While the iPod or D. player is connected, all
pattern will change to the “Positive” or
operations from the iPod or D. player are
“Negative” pattern depending on the
disabled. Perform all operations from this
“Dimmer” setting.
unit.
• Changing the “Amp Gain” setting from
• The text information may not be displayed
“High PWR” to “Low PWR” when the level
correctly.
is set higher than “Volume 30,” the unit
– Some characters such as accented letters
automatically changes the volume level to
cannot be shown correctly on the display.
“Volume 30.”
– Depends on the condition of
communication between the iPod or
Title assignment
D. player and the unit.
• If you try to assign titles to more than 30
• If the text information includes more than
station frequencies or 30 discs, “Name
8 characters, it scrolls on the display (see
Full” appears. Delete unwanted titles before
also page 20). This unit can display up to 40
assignment.
characters.
38
EN36-43KD-G827[EE]f.indd 38EN36-43KD-G827[EE]f.indd 38 12/23/05 9:53:32 AM12/23/05 9:53:32 AM
Оглавление
- CONTENTS
- Control panel
- Remote controller — RM-RK50
- ⁄ Adjust the volume.
- Radio operations
- FM RDS operations
- ⁄ Start searching for your favorite
- Disc/USB memory
- ~
- Sound adjustments
- General settings — PSM
- Title assignment
- ~
- Other external component operations
- Ÿ Turn on the connected component Ÿ
- More about this unit
- Maintenance
- Troubleshooting
- Specifications
- CОДЕРЖАНИЕ
- Панель управления
- Пульт дистанционного управления — RM-RK50
- ⁄ Настройка громкости.
- Операции с радиоприемником
- Операции с FM RDS
- ⁄ Запустите поиск любимой
- ~
- ~
- Настройки звучания
- Общие настройки — PSM
- Присвоения названия
- ~
- Другие операции с внешним устройством
- Ÿ Включите подключенное Ÿ
- Дополнительная
- Обслуживание
- Устранение проблем
- Технические характеристики
- Please reset your unit