Dell Latitude XT2: Coin-Cell Battery

Coin-Cell Battery : Dell Latitude XT2

Coin-Cell Battery

Dell™Latitude™XT2ServiceManual

Removing the Coin-Cell Battery

Replacing the Coin-Cell Battery

Removing the Coin-Cell Battery

1. Follow the procedures in Before Working Inside Your Tablet-PC.

2. Turn the computer over and remove the main battery from the Tablet-PC.

3. Turn the computer over to the top side and remove the hinge cover from the Tablet-PC.

4. To get to the coin-cell battery, remove the keyboard from the Tablet-PC.

5. Disconnect the coin-cell cable from the system board.

6. Gently pry the coin-cell loose from the adhesive that attaches it to the system board and remove from the Tablet-PC.

WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

Replacing the Coin-Cell Battery

1. Peel the backing from the new coin-cell battery.

2. Connect the coin-cell cable to the system board and press the coin-cell battery into place on the system board. See diagram in step 6 above for

placement.

3. Replace the keyboard, attaching it securely with the keyboard screws.

4. Replace the hinge cover.

5. Turn the computer over and replace the battery. See Replacing the Main Battery.