Dell Latitude XT2: System Board
System Board : Dell Latitude XT2
System Board
Dell™Latitude™XT2ServiceManual
Removing the System Board
1. Follow the procedures in Before Working Inside Your Tablet-PC.
2. Remove the battery from the Tablet-PC.
3. Remove the hard drive from the Tablet-PC.
4. Remove the memory and mini-card cover from the Tablet-PC.
5. Remove the memory from the Tablet-PC.
6. Remove the mini-card from the Tablet-PC.
7. Remove the BIOS chip from the Tablet-PC.
8. Remove the Bluetooth module from the Tablet-PC.
9. Remove the hinge cover from the Tablet-PC.
10. Remove the keyboard from the Tablet-PC.
11. Remove the coin-cell battery from the Tablet-PC.
12. Remove the display assembly from the Tablet-PC.
13. Remove the palm rest from the Tablet-PC.
14. Disconnect the speaker cable from the system board.
WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
15. Lift the retaining clip on the SATA cable.
16. Disconnect the SATA cable from the system board.
17. Lift the retaining clip on the wireless cable connector.
18. Disconnect the wireless cable connector from the system board.
19. Remove the one screw securing the system board to the bottom plastic.
20. Lift the system board up at an angle and remove from the Tablet-PC.
21. Disconnect the fan cable from the system board connector, then flip the system board over.
22. Loosen the four captive screws on the heat sink.
23. Remove the top section of the heat sink assembly from the system board, then turn the system board over again.
24. Remove the bottom section of the heat sink assembly.
Оглавление
- Dell™Latitude™XT2ServiceManual
- System BIOS
- Diagnostics
- Digitizer Options Tab
- Tablet-PC Features
- Interaction Options Tab
- Application Matrix
- Multi-Touch Gestures Feature
- About Tab
- Adding and Replacing Parts
- Tablet-PC Pen
- Specifications
- Tablet-PC Buttons
- Tablet-PC Interface
- Table-PC User Modes
- Tablet-PC Settings
- Memory and Mini-Card Cover
- Main Battery
- Battery Latch
- BIOS Chip
- Internal Card With Bluetooth®Wireless Technology
- Coin-Cell Battery
- Grip Cover
- Hard Drive
- Heat Sink and Fan Assembly
- Keyboard
- Display Assembly
- Hinge Cover
- Memory
- Palm Rest
- Speaker
- System Board
- Mini-Card
- Tablet-PC Modes
- Working on Your Tablet-PC
