Dell Latitude XT2: Memory and Mini-Card Cover
Memory and Mini-Card Cover : Dell Latitude XT2
Memory and Mini-Card Cover
Dell™Latitude™XT2ServiceManual
Removing the Memory and Mini-Card Cover
Replacing the Memory and Mini-Card Cover
Removing the Memory and Mini-Card Cover
1. Follow the procedures in Before Working Inside Your Tablet-PC.
2. Remove the battery from the Tablet-PC.
3. Loosen the two captive screws on the memory and mini-card cover.
WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
4. Tilt the cover towards the front of the Tablet-PC.
5. Lift the cover at an angle, and remove from the Tablet-PC.
Replacing the Memory and Mini-Card Cover
1. Insert the tabs of the memory and mini-card cover into the slots of the base.
2. Rotate the cover down and into place.
3. Tighten the two captive screws on the memory and mini-card cover.
4. Install the battery. See Replacing the Main Battery.
Оглавление
- Dell™Latitude™XT2ServiceManual
- System BIOS
- Diagnostics
- Digitizer Options Tab
- Tablet-PC Features
- Interaction Options Tab
- Application Matrix
- Multi-Touch Gestures Feature
- About Tab
- Adding and Replacing Parts
- Tablet-PC Pen
- Specifications
- Tablet-PC Buttons
- Tablet-PC Interface
- Table-PC User Modes
- Tablet-PC Settings
- Memory and Mini-Card Cover
- Main Battery
- Battery Latch
- BIOS Chip
- Internal Card With Bluetooth®Wireless Technology
- Coin-Cell Battery
- Grip Cover
- Hard Drive
- Heat Sink and Fan Assembly
- Keyboard
- Display Assembly
- Hinge Cover
- Memory
- Palm Rest
- Speaker
- System Board
- Mini-Card
- Tablet-PC Modes
- Working on Your Tablet-PC
