Dell Latitude XT2: Memory
Memory : Dell Latitude XT2
Memory
Dell™Latitude™XT2ServiceManual
Removing a Memory Module
Replacing a Memory Module
Removing a Memory Module
1. Follow the procedures in Before Working Inside Your Tablet-PC.
2. Remove the battery from the Tablet-PC.
3. Remove the memory and mini-card cover from the Tablet-PC.
3. Use your fingers to gently pry the retaining clips away from the memory module.
WARNING: Before working inside your Tablet-PC, read the safety information that shipped with your Tablet-PC. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
4. Remove the memory module from the Tablet-PC at an angle.
Replacing a Memory Module
1. Position the memory module into place by starting with the top side of the module and easing it down into place at an angle.
2. Ease the memory module down until it snaps into place between the retainer clips.
3. Replace the memory and mini-card cover.
4. Replace the battery. See Replacing the Main Battery.
Оглавление
- Dell™Latitude™XT2ServiceManual
- System BIOS
- Diagnostics
- Digitizer Options Tab
- Tablet-PC Features
- Interaction Options Tab
- Application Matrix
- Multi-Touch Gestures Feature
- About Tab
- Adding and Replacing Parts
- Tablet-PC Pen
- Specifications
- Tablet-PC Buttons
- Tablet-PC Interface
- Table-PC User Modes
- Tablet-PC Settings
- Memory and Mini-Card Cover
- Main Battery
- Battery Latch
- BIOS Chip
- Internal Card With Bluetooth®Wireless Technology
- Coin-Cell Battery
- Grip Cover
- Hard Drive
- Heat Sink and Fan Assembly
- Keyboard
- Display Assembly
- Hinge Cover
- Memory
- Palm Rest
- Speaker
- System Board
- Mini-Card
- Tablet-PC Modes
- Working on Your Tablet-PC