Beurer MG30: 7. Maintenance and storage

Flat position/upright position

> Put the massage chair in the at position

The back rest and leg rest can be raised or lowered.

The functions are available when a massage programme is

onoro.

It is not necessary to activate the On/O button to do this.

w Position buttons for upright and at position

Switching o the massage chair

After a massage programme is nished, the chair automatically switches o. The current position of the massage

chair is maintained.

The position can be changed using the Position button.

By pressing the On/O button again, the relax massage programme is restarted.

The massage chair returns to the start position if the On/O button is pressed twice.

Caution!

Do not use the device for longer than 15 minutes at a time otherwise the device could overheat. Allow the device

to cool for at least 30minutes before using it again.

During the massage, you can switch o the device at any time using the on/o button.

The massage chair returns to the start position.

> Switch o the massage chair using the main switch beneath the back rest.

> Pull the mains plug out of the socket

Additional settings, operating options

Folding mechanism

The massage chair can be folded away to save space when

stored.

> Switch o the hand switch at the on/o button.

The massage chair returns to the start position.

> Once the chair has reached the start position, switch o

the massage chair using the main switch

> Pull the mains plug from the socket

> Open the seat cushion towards the front.

> Unplug the plug attached to the coil spring, see step 4.

> Release the locking mechanism at the back of the back

rest at thebottom

> Carefully push the back rest forwards on to the seat

If required, lay the back rest cushion back over the back

rest before doing so

7. Maintenance and storage

Warning!

•

The device must be switched o at the main switch after every use and before cleaning.

•

Pull the mains plug out of the socket.

> Wipe the massage chair from time to time with a dry, lint-free or slightly damp cloth.

> Every two to three months, wipe the chair using a clean cloth with a small amount of care product for articial

leather.

> Afterwards, dry the chair with a clean, dry cloth

Artificial leather is sensitive to grease. Clean the massage chair only using care products designated for artificial

21