Beurer MG30: 5. Initial use

relax

> Press the relax button

The automatic massage programme starts.

Total duration: 15 minutes. The massage chair then remains in the position set by you.

health

> Press the health button

The automatic massage programme starts.

Total duration: 15 minutes. The massage chair then remains in the position set by you.

therapy

> Press the therapy button

The automatic massage programme starts.

Total duration: 15 minutes. The massage chair then remains in the position set by you.

Vibration massage; intensity

There are three settings for the vibration massage in the seat area.

1 (low) / 2 (medium) / 3 (high)

There are three settings for the vibration massage in the foot area.

1 (low) / 2 (medium) / 3 (high)

Note

The vibration massage functions independently of the massage programmes.

To allow this, the On/O button must be activated and the current massage programme deactivated.

Vibration massage / deactivation

You can deactivate the vibration massage by pressing the intensity button again.

Pressing the intensity button once activates the vibration massage; pressing the same button again deactivates it.

Position buttons for upright and flat position

The functions are available when a massage programme is on or o.

Back rest upwards and leg rest downwards

position button

> Press the position button.

> Press the position button again.

The back rest and leg rest stay in the current position.

Back rest downwards and leg rest upwards

position button

> Press the position button.

> Press the position button again.

The leg rest and back rest stay in the current position.

5. Initial use

Warning!

•

Keep packaging material away from children!

There is a choking hazard.

•

Before using the device for the rst time, read the safety notes in the Safety section.

 wSafety, pages 14 to 15

18

Caution!

•

The massage chair could damage your ooring. Place a suitable, non-slip underlay under the massage chair.

Installation location

•

Install the massage chair on a sturdy and even surface.

•

Before using the device for the rst time, remove all obstacles in front of and behind the massage chair so that

the back rest can be lowered and the leg rest raised freely.

Unpacking and assembly

The massage chair MC3800 is delivered in a cardboard box.

Caution!

Do not use sharp or pointed tools (Stanley knife) to remove the packaging.

Step 1

> Insert 2 AAA batteries in the hand switch according to the markings.

Step 2

> Open the cardboard box and hold the massage chair at the designa-

ted holding points

> Remove the chair from the cardboard box

2 persons are required for this.

> Carefully remove all the packaging material

Step 3

> Unfold the back rest to the upright position until the locking mecha-

nism audibly engages.

The back rest now stands at approx. 115°.

Step 4

> Plug in the plug attached to the coil spring in

accordance with the diagram.

> Fold the seat cushion backwards against the

back rest

UP

19