Asus P4P8X: 1.10 Expansion slots
1.10 Expansion slots: Asus P4P8X
1.10 Expansion slots
The motherboard has five PCI slots and one Accelerated Graphics Port (AGP) slot.
To install and configure an expansion card:
1. Install an expansion card following the instructions that came with the chassis.
NOTE: The AGP slot supports only +0.8V or 1.5V AGP cards.
2. Turn on the system and change the necessary BIOS settings, if any. See
Chapter 2 for BIOS information.
3. Assign an IRQ to the card. Refer to the tables on the next page.
4. Install the drivers and/or software applications for the expansion card
according to the card documentation.
1.10.1 Standard interrupt assignments
IRQ Priority Standard Function
0 1 System Timer
1 2 Keyboard Controller
2 N/A Programmable Interrupt
3* 11 Communications Port (COM2)
4* 12 Communications Port (COM1)
5* 13 IRQ holder for PCI steering
6 14 Floppy Disk Controller
7* 15 Printer Port (LPT1)
8 3 System CMOS/Real Time Clock
9* 4 IRQ holder for PCI steering
10* 5 Advance AC’97 CODEC
11* 6 Standard PCI Graphics Adapter (VGA)
12* 7 PS/2 Compatible Mouse Port
13 8 Numeric Data Processor
14* 9 Primary IDE Channel
15* 10 Secondary IDE Channel
* These IRQs are usually available for ISA or PCI devices.
1.10.2 IRQ assignments for this motherboard
ABCDEFGH
PCI slot 1 — — — — — shared — —
PCI slot 2 — — — — — — shared —
PCI slot 3 — — — — — — — shared
PCI slot 4 — — — — — — shared —
PCI slot 5 — — — — — — — shared
AGP slot shared shared — — — — — —
Onboard USB controller HC0 shared — — — — — — —
Onboard USB controller HC1 — — — used — — — —
Onboard USB controller HC2 — — used — — — — —
Onboard USB controller HC3 shared — — — — — — —
Onboard USB 2.0 controller — — — — — — — shared
Onboard LAN — — — — used — — —
Onboard audio — shared — — — — — —
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ”
or that the cards do not need IRQ assignments. Otherwise, conflicts will arise
between the two PCI groups, making the system unstable and the card inoperable.
ASUS P4P8X motherboard user guide
1-17
1.10.3 PCI slots
There are five 32-bit PCI slots on this motherboard. The slots support PCI cards
such as a LAN card, SCSI card, USB card, and other cards that comply with PCI
specifications.
1.10.4 AGP slot
This motherboard has an Accelerated Graphics Port (AGP) slot that supports AGP
8X (+0.8V) cards and AGP 4X (+1.5V) cards. When you buy an AGP card, make
sure that you ask for one with +0.8V or +1.5V specification.
Note the notches on the card golden fingers to ensure that they fit the AGP slot on
your motherboard.
Install only +0.8V or +1.5V AGP cards. This motherboard does not support 3.3V
AGP cards.
P4P8X
If installing the ATi 9500 or 9700 Pro Series VGA cards, use only the card
version PN xxx-xxxxx-30 or later, for optimum performance and overclocking
stability.
1-18
Chapter 1: Product introduction
®
• The PCI 5 slot and the WiFi slot can not be used at the same time.
• When installing long PCI cards, it is recommended that to install in PCI
slots 2, 4 or 5. Long PCI cards installed in PCI slot 1 may interfere with the
SATA connectors.
• When installing 64-bit PCI cards, it is recommended not to install in PCI slot
3. 64-bit PCI cards installed in PCI slot 3 may interfere with the USB
connectors.
Keyed for 1.5v
P4P8X Accelerated Graphics Port (AGP)
Оглавление
- Contents
- Notices
- Safety information
- About this guide
- ASUS contact information
- P4P8X specifications summary
- P4P8X specifications summary
- 1.1 Welcome!
- 1.3 Special features
- 1.4 Motherboard components
- 1.5 Motherboard layout
- 1.6 Before you proceed
- 1.7 Motherboard installation
- 1.8 Central Processing Unit (CPU)
- 1.9 System memory
- 1.10 Expansion slots
- 1.11 Jumpers
- 1.12 Connectors
- 2.1 Managing and updating your BIOS
- 2.2 BIOS Setup program
- 2.3 Main menu
- 2.4 Advanced menu
- 2.5 Power menu
- 2.6 Boot menu
- 2.7 Exit menu
- 3.1 Install an operating system
- 3.3 Software information