Asus T3-M2NC51PV: инструкция

English

T-Series

ASUS PC (Desktop Barebone)

Installation manual

Download the latest manual from the ASUS website: www.asus.com

Front/Rear panel features

English

1. Optical drive bay cover

11. Expansion slots

2. Power button (

)

12.* Optical S/PDIF Out port (

)

3. HDD LED (

)

(lights up when

13. Power connector

the hard disk drive operates)

14.** Voltage selector switch

4. Front panel cover

15. Power switch

5. Memory Stick/

16.* • PS/2 keyboard port (

)

Memory Stick Pro card slot ( )

• PS/2 mouse port (

)

®

6. CompactFlash

/

• VGA port (

)

™

Microdrive

card slot ( )

• DVI-D port (

)

7. Secure Digital/

• E-SATA port (

)

MultiMediaCard slot ( )

• LAN (RJ-45) port (

)

8. Optical drive eject button ( )

• Serial (COM1) port (

)

9.* • USB 2.0 ports (

)

• USB 2.0 ports (

)

• S/PDIF In port (

)

• 6-pin IEEE 1394a port (

)

• 4-pin IEEE 1394a port (

)

• Coaxial S/PDIF Out port (

)

• Headphone port (

)

 •Audioportscongurations:

• Microphone port (

)

10. Expansion slot metal brackets

• 6-channel

2 Installation manual

• 8-channel

Front (Close)

Front (Slide open)

Rear

1

5

7

8

10

11

2

6

9

14

3

12

4

13

16

15

NOTE: *The front/rear panel ports and their locations may vary, depending on the

model of your system. For detailed descriptions, refer to the system User Guide.

NOTE: **The system’s power supply unit has a 115V / 230V voltage selector switch

located beside the power connector. Use this switch to select the appropriate system

input voltage according to the voltage supply in your area.

Internal components

NOTE: The illustration below shows the internal view of the system when you remove

the cover and lift the power supply unit.

English

1

2

5

4

6

7

8

3

1. 5.25-inch optical drive cage

5. CPU socket

2. 3.5-inch hard disk drive cage

6.* ASUS motherboard

3. Power supply unit

7. PCI Express x16 slot

4. DIMM sockets

8. PCI slot

NOTE: *Refer to the system User Guide for motherboard details.

Removing the cover

1. Remove the three cover screws on

3

the rear panel. Keep the screws for

later use.

2. Pull the cover toward the rear panel.

3. Lift the cover, then set it aside.

1

2

3Installation manual

Lifting the power supply unit

1. Locate and remove the two screws.

English

1

2. Lift the PSU in the direction of the

arrow to a 90º angle.

2

CAUTION: When removing the PSU,

makesuretoholdorsupportitrmly.

The unit might accidentally drop and

damage the other system components.

Installing a CPU

®

Installing an Intel

CPU in the LGA775 package

1. Locate the CPU socket on the

Retention tab

motherboard.

2. Press the load lever with your

2A

thumb (2A), then move it to the left

(2B) until it is released from the

2B

retention tab.

Load lever

3. Lift the load lever in the direction of

the arrow to a 135º angle.

4. Lifttheloadplatewithyourthumbandforengertoa100ºangle(4A),then

push the PnP cap from the load plate window to remove (4B).

5. Position the CPU over the socket, making sure that the gold triangle is on the

bottom-left corner of the socket. Fit the socket alignment key into the CPU

notch.

6. Close the load plate (6A), then push the load lever (6B) until it snaps into the

retention tab.

PnP cap

Load plate

6A

Gold

4B

4A

triangle

mark

3

5

6B

Alignment key

CAUTION: Incorrect installation of the CPU into the socket may bend the pins and

severely damage the CPU.

4 Installation manual

Installing an AMD CPU

1. Locate the CPU socket, then lift the socket lever to a 90º angle.

2. Install the CPU to the socket, making sure that the CPU corner with the gold

triangle matches the socket corner with a small triangle.

3. Push down the socket lever to secure the CPU.

English

1

2

3

CAUTION: Incorrect installation of the CPU into the socket may bend the pins and

severely damage the CPU.

Installing the CPU fan and heatsink assembly

®

Installing an Intel

CPU heatsink and fan

1. Place the heatsink on top of the installed

A

CPU, making sure that the four fasteners

B

match the holes on the motherboard.

B

2. Push down two fasteners at a time in a

diagonal sequence to secure the heatsink

A

and fan assembly in place.

3. When the fan and heatsink assembly is in

place, connect the CPU fan cable to the

connector on the motherboard.

1

1

CAUTION. Do not forget to connect the CPU fan connector! Hardware monitoring error

can occur if you fail to plug this connector.

5Installation manual

Installing an AMD CPU heatsink and fan

English

1. Place the heatsink on top of the installed CPU.

2. Attach one end of the retention bracket to the retention module base.

3. Attach the other end of the retention bracket (near the retention bracket lock)

to the retention module base until it clicks in place.

4. Push down the retention bracket lock on the retention mechanism to secure

the fan and heatsink to the module retention module base.

5. Connect the CPU fan cable to the connector on the motherboard.

CAUTION. Do not forget to connect the CPU fan connector! Hardware monitoring error

can occur if you fail to plug this connector.

1

2

CPU fan

5

Retention

CPU fan

bracket lock

4

connector

Retention bracket

3

CPU heatsink

Retention module base

Installing a DIMM

1. Locate the DIMM sockets in the motherboard.

2. Unlock a DIMM socket by pressing the retaining clips outward.

3. Align a DIMM on the socket such that the notch on the DIMM matches the

break on the socket.

4. Push the DIMM to the socket until the retaining clips snap inward.

4

2

3

CAUTION:

• Unplug the power supply before adding or removing DIMMs. Failure to do so may

cause damage to the motherboard and/or components.

 • ADDRDIMMiskeyedwithanotchsothatittsinonlyonedirection.Donotforce

a DIMM into a socket to avoid damaging the DIMM.

6 Installation manual

Installing an expansion card

1. Locate and remove one metal bracket lock screw.

2. Remove the metal bracket lock.

3. Alignthecardconnectorwiththeslot,thenpressrmly.

4. Secure the card with one screw.

English

5. Replace the metal braket lock, then secure it with one screw.

4

1

5

2

3

Installing a hard disk drive

1. Connect the SATA/IDE power cable to the

plug of the power supply unit.

2. Connect the SATA/IDE (2A) and power (2B)

plugs to the connectors at the back of the

SATA/IDE hard disk drives.

3. Locate the HDD tray.

1

4. Insert a hard disk drive (with the HDD PCB

facing the top of the chassis) to the tray,

then secure it with four screws.

5. Connect the SATA/IDE signal cable to the

SATA/IDE connector on the motherboard, and

tighten all the cables with the plastic coils.

SATA

IDE

4

2B

2A

4

2A

2B

7Installation manual

Installing an optical drive

1. Place the chassis upright.

English

2. Insert the SATA/IDE optical drive

to the upper 5.25 in drive bay, then

2

carefully push the drive until its

screw holes align with the holes on

the bay.

3. Secure the optical drive with four

screws on both sides of the bay.

4. Connect the SATA/IDE (4A) and

power plugs (4B) to the connectors

at the back of the SATA/IDE drive.

3

SATA IDE

4B

4A

4A

4B

Reinstalling the cover

1. Fit the cover tabs with the chassis

1B

rail and the front panel tabs (1A),

then lower the rear edge of the

cover as shown (1B).

2. Secure the cover with three screws.

2

1A

8 Installation manual