Pioneer S-LX70-LR: Before you start Caution

2

En

Thank you for buying this Pioneer product. Please read through 

these operating instructions so you will know how to operate your 

model properly. After you have finished reading the instructions, 

put them away in a safe place for future reference.

Before you start

• The nominal impedance of this speaker system is 6 

Ω

. Connect 

the speaker system to an amplifier with a load impedance of 6 

Ω

 (a model with “6 

Ω

” displayed on the speaker output 

terminals).

In order to prevent damage to the speaker system resulting from 

input overload, please observe the following precautions:

• Do not supply power to the speaker system in excess of the 

maximum permissible input.

• When using a graphic equalizer to emphasize loud sounds in 

the high-frequency range, do not use excessive amplifier 

volume.

• Do not try to force a low-powered amplifier to produce loud 

volumes of sound (the amplifier’s harmonic distortion will be 

increased, and you may damage the speaker).

Care of the speaker cabinets

• With normal use, wiping with a soft cloth should be sufficient 

to keep the cabinet clean. If necessary, clean with a cloth 

dipped in a neutral cleanser diluted five or six times with water, 

and wrung out well. Do not use furniture wax or cleansers. 

Never use alcohol, thinners, benzine, insecticide sprays or 

other chemicals on or near this unit since these will corrode the 

surfaces. When using chemically-treated cloths, be sure to 

carefully read their accompanying instruction manual.

Cleaning the glossy finish of the speaker system

• When cleaning the finish of the speaker system, gently wipe it 

with a dry soft cloth; the supplied cleaning cloth.

• If you use a dusty or hard cloth or if you rub the screen hard, the 

finish of the product will be scratched.

• If you clean the surface of the speaker system with a wet cloth, 

water droplets on the surface may enter into the product, 

resulting in malfunction. 

Caution

Installation

• Do not place the speaker on an unstable surface, as doing so 

may cause the speaker to fall and cause damage or bodily 

injury.

• Switch off and unplug your AV equipment and consult the 

instructions when connecting up components. Make sure you 

use the correct connecting cables.

• When placing this unit, avoid areas where it may be likely to fall 

and cause injury in the event of a natural disaster (such as an 

earthquake). For more information, see page 6.

• Pioneer is not responsible for any accidents or damage that 

result from improper installation, misuse or modification of the 

product, or natural disasters.

Using the speakers

• Do not use the speaker to output distorted sound for long 

periods of time. This can result in damages to the speaker and 

poses a potential fire hazard.

• Do not sit or stand on the speaker, or let children play on the 

speaker. Doing so could provoke the speaker to fall, causing 

damages or bodily injury.

CAUTION

These speaker terminals carry 

HAZARDOUS LIVE voltage

. To 

prevent the risk of electric shock when connecting or 

disconnecting the speaker cables, disconnect the power cord 

before touching any uninsulated parts.

01_S_LX70-LR_En.book  2 ページ  ２００７年９月１２日　水曜日　午後２時５８分