Pioneer S-8EX-QL: Other Information Using the foam plugs Attaching/Removing the Grille Cover

11

En

English

Other Information

Using the foam plugs

This unit is furnished with foam plugs that are useful for adjusting 

the volume of bass sound. To use, place the foam plugs gently into 

the bass reflex ports on either side of the speaker. Insert either 

foam plug A alone, or both foam plugs A and B to achieve the 

desired sound.

Using foam plugs A only

Using both foam plugs A and B

Attaching/Removing the Grille Cover

This speaker system comes with grille covers which may be 

attached and removed by:

1

To attach the grille cover, line up the holes on the speaker 

with the inserts on the grill, and press firmly.

2

To remove the grille cover, grasp the upper and lower 

edges of the grille cover at the left side by your hands and 

gently pull toward you to separate the left part of the grille 

cover from the speaker.

3

Then move your hands to the middle of the grille cover 

and again gently pull the upper and lower edges toward you 

to separate the middle section.

4

Finally, grasp the upper and lower edges of the grille 

cover at the right side and gently pull toward you to 

separate the remaining part of the grille cover from the 

speaker.

Cleaning the speaker cabinet

With normal use, wiping with a dry cloth should be sufficient to 

keep the cabinet clean. If necessary, clean with a cloth dipped in 

a neutral cleanser diluted five or six times with water, and wrung 

out well. Do not use furniture wax or cleansers.

Never use thinners, benzine, insecticide sprays or other chemicals 

on or near this unit since these will corrode the surfaces.

Bass 

r

eflex 

p

o

r

ts

Bass 

r

eflex 

p

o

r

ts

S-8EX_EN.book  11 ページ  ２００８年７月１６日　水曜日　午後２時２０分