Pioneer DEH-1600UBB: System menu System menu

Black plate (7,1)

Section

Using this unit

Using this unit

02

3 Turn M.C. to select the system menu

Use this function when wanting to listen only to

Sound from this system is automatically muted or

SP-P/O MODE (rear output and preout setting)

function.

English

high-frequency sounds. Only frequencies higher

attenuated when a signal from equipment with a

Once selected, the following system menu func-

The rear speaker leads output and the RCA output

than the high-pass filter (HPF) cutoff are output

mute function is received.

tions can be adjusted.

of this unit can be used to connect a full-range

from the speakers.

1 Press M.C. to display the setting mode.

! MUTE MODE and PW SAVE are not available

speaker or subwoofer. Select a suitable option for

1 Press M.C. to display the setting mode.

2 Turn M.C. to select the desired setting.

for DEH-1600UBA.

your connection.

2 Press M.C. to cycle between the following:

! MUTE – Muting

1 Press M.C. to display the setting mode.

Cut-off frequency—Slope level

! 20dB ATT – Attenuation (20dB ATT has a

LANGUAGE (multi-language)

2 Turn M.C. to select the desired setting.

3 Turn M.C. to select the desired setting.

stronger effect than 10dB ATT)

! REAR/SUB.W – Select when there is a full-

Cut-off frequency: OFF—50HZ—63HZ—80HZ

! 10dB ATT – Attenuation

1 Press M.C. to select the desired setting.

range speaker connected to the rear speak-

—100HZ—125HZ—160HZ—200HZ

ENG (English)—РУС (Russian)—TUR (Turk-

PW SAVE (power saving)

er leads output and there is a subwoofer

Slope level: –12— –24

ish)

connected to the RCA output.

Switching this function on enables you to reduce

SLA (source level adjustment)

! SUB.W/SUB.W – Select when there is a

CLOCK SET (setting the clock)

the consumption of battery power.

subwoofer connected directly to the rear

This function prevents the volume from changing

! Turning on the source is the only operation al-

speaker leads output without any auxiliary

too dramatically when the source switches.

1 Press M.C. to display the setting mode.

lowed when this function is on.

amp and there is a subwoofer connected

! Settings are based on the FM volume level,

2 Press M.C. to select the segment of the clock

1 Press M.C. to turn the power save on or off.

to the RCA output.

which remains unchanged.

display you wish to set.

! REAR/REAR – Select when there is a full-

! The MW/LW volume level can also be adjusted

Hour—Minute

range speaker connected to the rear speak-

with this function.

3 Turn M.C. to adjust the clock.

Initial menu

er leads output and the RCA output.

1 Press M.C. to display the setting mode.

12H/24H (time notation)

If there is a full-range speaker connected to

2 Turn M.C. to adjust the source volume.

1 Press and hold SRC/OFF until the unit

the rear speaker leads output and the RCA

Adjustment range: +4 to –4

turns off.

1 Press M.C. to select the desired setting.

output is not used, you may select either

12H (12-hour clock)—24H (24-hour clock)

REAR/SUB.W or REAR/REAR.

2 Press and hold SRC/OFF until the main

AUTO PI (auto PI seek)

menu appears in the display.

System menu

Only for DEH-1600UBA

The unit can automatically search for a different

Important

Press M.C. to display the main menu.

System menu

station with the same programming, even during

PW SAVE (power saving) is canceled if the ve-

preset recall.

1 Press and hold SRC/OFF until the unit

hicle battery is disconnected and will need to be

3 Turn M.C. to change the menu option

1 Press M.C. to turn Auto PI seek on or off.

turns off.

turned back on once the battery is reconnected.

and press to select INITIAL.

When PW SAVE (power saving) is off, depend-

AUX (auxiliary input)

2 Press and hold SRC/OFF until the main

ing on connection methods, the unit may con-

4 Turn M.C. to select the initial menu func-

Activate this setting when using an auxiliar y de-

menu appears in the display.

tinue to draw power from the battery if your

tion.

vice connected to this unit.

Only for DEH-1600UBA

vehicle’s ignition doesn’t have an ACC (acces-

Once selected, the following initial menu func-

1 Press M.C. to turn AUX on or off.

Press M.C. to display the main menu.

sory) position.

tions can be adjusted.

DIMMER (dimmer)

3 Turn M.C. to change the menu option

1 Press M.C. to display the main menu.

FM STEP (FM tuning step)

and press to select SYSTEM.

1 Press M.C. to turn the dimmer on or off.

! You can also change the dimmer setting by

2 Turn M.C. to change the menu option

1 Press M.C. to select the FM tuning step.

4 Turn M.C. to select the system menu

pressing and holding

/DIMMER.

and press to select SYSTEM.

100 (100 kHz)—50 (50 kHz)

function.

MUTE MODE (mute mode)

For details, refer to System menu on page 7.

En

7

<QRD3204-A>7