Pioneer DEH-1600UBB: Audio adjustments

Black plate (6,1)

Section

02

Using this unit

Using this unit

2 Turn M.C. to change the menu option

Viewing a list of the files (or folders) in the se-

FADER (fader adjustment)

Loudness compensates for deficiencies in the low-

and press to select FUNCTION.

lected folder

frequency and high-frequency ranges at low vol-

Once selected, the function below can be ad-

1 When a folder is selected, press M.C.

1 Press M.C. to display the setting mode.

ume.

justed.

2 Turn M.C. to adjust the front/rear speaker bal-

1 Press M.C. to select the desired setting.

Playing a song in the selected folder

ance.

OFF (off)—LOW (low)—MID (mid)—HI (high)

1 When a folder is selected, press and hold M.C.

S.RTRV (sound retriever)

BALANCE (balance adjustment)

SUB.W (subwoofer on/off setting)

Automatically enhances compressed audio and

Operations using special buttons

restores rich sound.

This unit is equipped with a subwoofer output

1 Press M.C. to display the setting mode.

1 Press M.C. to select the desired setting.

which can be turned on or off.

2 Turn M.C. to adjust the left/right speaker bal-

Selecting a repeat play range

For details, refer to Enhancing compressed

1 Press M.C. to select the desired setting.

ance.

NOR (normal phase)—REV (reverse phase)—

1 Press 6/

to cycle between the following:

audio and restoring rich sound (sound retriever)

EQ SETTING (equalizer recall)

OFF (subwoofer off)

CD/CD-R/CD-RW

on page 6.

! ALL – Repeat all tracks

1 Press M.C. to display the setting mode.

SUB.W CTRL (subwoofer adjustment)

! ONE – Repeat the current track

2 Turn M.C. to select the equalizer.

Only frequencies lower than those in the selected

! FLD – Repeat the current folder

Audio adjustments

POWERFUL—NATURAL—VOCAL—CUS-

range are outputted from the subwoofer.

USB storage device

TOM1—CUSTOM2—FLAT—SUPER BASS

1 Press M.C. to display the main menu.

1 Press M.C. to display the setting mode.

! ALL – Repeat all files

The equalizer band and equalizer level can be

2 Press M.C. to cycle between the following:

! ONE – Repeat the current file

customized when CUSTOM1 or CUSTOM2 is

2 Turn M.C. to change the menu option

Cut-off frequency—Output level—Slope level

! FLD – Repeat the current folder

selected.

and press to select AUDIO.

Rates that can be adjusted will flash.

Playing tracks in random order

If selecting CUSTOM1 or CUSTOM2, complete

3 Turn M.C. to select the desired setting.

1 Press 5/

to turn random play on or off.

the procedures outlined below. If selecting

3 Turn M.C. to select the audio function.

Cut-off frequency: 50HZ—63HZ—80HZ—

Tracks in a selected repeat range are played in

other options, press M.C. to return to the pre-

Once selected, the following audio functions

100HZ—125HZ—160HZ—200HZ

random order.

vious display.

can be adjusted.

Output level: –24 to +6

! To change songs during random play, press d

! CUSTOM1 can be set separately for each

! FADER is not available when SUB.W/SUB.W

Slope level: –12— –24

to switch to the next track. Pressing c restarts

source.

is selected in SP-P/O MODE. For details, refer

BASS BOOST (bass boost)

playback of the current track from the begin-

! CUSTOM2 is a shared setting used in com-

to SP-P/O MODE (rear output and preout set-

ning of the song.

mon for all sources.

ting) on page 7.

1 Press M.C. to display the setting mode.

3 Press M.C. to display the setting mode.

! SUB.W and SUB.W CTRL are not available

Pausing playback

2 Turn M.C. to select a desired level.

4 Press M.C. to cycle between the following:

when REAR/REAR is selected in

1 Press 4/PAUSE to pause or resume.

0 to +6 is displayed as the level is increased or

Equalizer band—Equalizer level

SP-P/O MODE. For details, refer to

decreased.

Enhancing compressed audio and restoring rich

5 Turn M.C. to select the desired setting.

SP-P/O MODE (rear output and preout set-

sound (sound retriever)

Equalizer band: 80HZ—250HZ—800HZ—

ting) on page 7.

HPF SETTING (high pass filter adjustment)

1 Press 3/S.Rtrv to cycle between:

2.5KHZ—8KHZ

! SUB.W CTRL is not available when SUB.W is

1—2—OFF (off)

Equalizer level: +6 to –6

selected in OFF. For details, refer to SUB.W

1 is effective for low compression rates, and 2

! You can also switch the equalizer by pressing

(subwoofer on/off setting) on page 6.

is effective for high compression rates.

EQ repeatedly.

! SLA is not available when FM is selected as

the source.

LOUDNESS (loudness)

Function settings

1 Press M.C. to display the main menu.

6

En

<QRD3204-A>6