Pioneer X-CM31-T: Chapter 7: USB playback Playing USB storage devices

;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸱ᖺ㸲᭶㸶᪥ࠉ᭶᭙᪥ࠉ༗๓㸯㸯󰪍㸲㸷ศ

USB playback07

Chapter 7:

USB playback

Repeat play

Repeat play can play one track, all tracks or a programmed

Playing USB storage devices

sequence continuously.

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

To repeat one track:

• Pioneer does not guarantee that any file recorded on a

Press REPEAT repeatedly until “RPT ONE” appears. Press

USB storage device will play or that power will be

ENTER.

supplied to a USB storage device. Also note that Pioneer

will accept no responsibility whatsoever for loss of files

To repeat all tracks:

on USB storage devices caused by connection to this

Press REPEAT repeatedly until “RPT ALL” appears. Press

unit.

ENTER.

1 Press

USB

as the input source.

To repeat desired tracks:

“USB/IPOD” is shown on the main display.

Perform steps 1 - 5 in “Programmed play” section on next

page and then press REPEAT repeatedly until “RPT ALL”

2 Connect the USB storage device.

appears. Press ENTER.

The number of folders or files stored on the connected USB

storage device appear on the main display automatically.

To cancel repeat play:

• This receiver does not support a USB hub.

Press REPEAT repeatedly until “RPT OFF” appears. Press

• If iPod/iPhone/iPad is connected, the unit will begin

ENTER.

charging.

Note

TIMER VOLUME

• After performing repeat play, be sure to press #.

Otherwise, the file of USB storage device will play

continuously.

• During repeat play, random play is not possible.

iPad

Random play

The file of USB storage device can be played in random order

automatically.

USB storage device

To random play all tracks:

(commercially available)

Press RANDOM repeatedly until “RDM ON” appears. Press

ENTER.

3 When the recognition is completed, press

To cancel random play:

!

to start playback.

Press RANDOM repeatedly until “RDM OFF” appears. Press

• When changing to a different input source, stop the USB

ENTER.

memory playback first, before changing.

Note

4 Disconnect USB storage device from the USB

• If you press the , during random play, you can move

terminal.

to the track selected next by the random operation. On

Turn the power off before removing the USB storage device.

the other hand, the + does not allow you to move to

the previous track. The beginning of the track being

Note

played will be located.

• This unit may not recognize a USB storage device, play

• In random play, the unit will select and play tracks

files or supply power to a USB storage device. For

automatically. (You cannot select the order of the

details, see When a USB storage device is connected on

tracks.)

page 29.

• During random play, repeat play is not possible.

• When a USB storage device is not playing and the unit

has not been operated for 15 minutes or more, the power

will automatically turn off.

22

En