Pioneer X-CM31-R: Information provided by RDS Notes for RDS operation Using the Auto Station program Memory (ASPM)

Using the tuner08

Information provided by RDS

Note

Each time the

RDS

DISPLAY is pressed, the display will switch

• If the same station is broadcasting on different

as follows:

frequencies, the strongest frequency will be stored in

memory.

• Any station which has the same frequency as the one

stored in memory will not be stored.

• If 30 stations have already been stored in memory, the

scan will be aborted. If you want to redo the ASPM

operation, erase the preset memory.

• If no station have been stored in memory, “END” will

appear for about 4 seconds.

• If the RDS signals are very weak, station names may not

be stored in memory.

• The same station name can be stored in different

channels.

• In a certain area or during certain time periods, the

station names may temporarily be different.

Notes for RDS operation

If any of the following events occur, it does

not mean that the unit is faulty:

When tuning in to a station other than an RDS station or to an

• “PS”, “No PS” and a station name appear alternately,

RDS station which sends weak signal, the display will change

and properly.

in the following order:

• If a particular station is not broadcasting properly or a

station is conducting tests, the RDS reception function

may not work properly.

• When you receive an RDS station whose signal is too

weak, information like the station name may not be

displayed.

• “No PS”, “No PYT” or “No RT” will flash for about 5

seconds, and then the frequency will be displayed.

Using the Auto Station program

Notes for radio text:

Memory (ASPM)

• The first 8 characters of the radio text will appear and

Whilst in the ASPM operation mode, the tuner will

then they will scroll across the display.

automatically search for new RDS stations. Up to 30 stations

• If you tune in to an RDS station which is not

can be stored.

broadcasting any radio text, “No RT” will be displayed

If you have already stored some stations in memory, the

when you switch to the radio text position.

number of new stations you can store will be less.

• Whilst radio text data is received or when the text

contents change, “RT” will be displayed.

1 Press

TUNER

on the remote control.

2 Press and hold down RDS ASPM on the

remote control.

After “ASPM” has flashed for about 4 seconds, scanning will

start (87.5 - 108 MHz).

After scanning, the number of stations stored in memory will

be displayed for 4 seconds, and then “END” will appear for 4

seconds.

To stop the ASPM operation before it is

complete:

Press # whilst it is scanning for stations. The stations which

are already stored in memory will be kept there.

26

En

Station name (PS) Programme type (PTY)

Frequency Radio text (RT)

;&0B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸱ᖺ㸲᭶㸶᪥ࠉ᭶᭙᪥ࠉ༗๓㸯㸯󰪍㸲㸷ศ