Pioneer S-LX70C: Confirm your accessories Installing the speaker Speaker system grill

01_S-LX70C_En.book 3 ページ ２００７年９月１２日　水曜日　午後２時４８分

English Français Deutsch

Confirm your accessories

Installing the speaker

•Speaker stand x 1

This speaker system cannot be placed directly on the surface of

floors or shelves. Always attach to a wall using the supplied

brackets, or place on a flat and secure surface using the supplied

speaker stand.

• This speaker system is magnetically shielded. However,

depending on the installation location, color distortion may

occur if the speaker system is installed extremely close to the

screen of a television set. If this happens, turn the power switch

of the television set OFF, and turn it ON after 15 to 30 minutes.

If the problem persists, place the speaker system away from the

• Bracket (for speaker/S) x 1

television set.

Mounting on walls

• Make sure that the wall you intend to mount the speaker on is

Italiano Español Português Dansk Norsk SuomiSvenska

strong enough to support it.

• Remember that the speaker system is heavy. Improper

installation of the speaker could cause it to fall and cause

• Bracket (for speaker/L) x 1

damage or injuries to persons nearby.

• Mounting screws are not supplied. Use screws suitable for

Nederlands

the wall material and support the weight of the speaker.

If you are unsure of the qualities and strength of the walls,

consult a professional for advice.

Once decided on the location of installation (such as the wall space

above or below of the TV), attach the speaker following the next

• Bracket (for wall) x 1

procedures.

Two types of brackets (for speaker) are supplied. When using

alongside with a Pioneer plasma television, use the L-type bracket.

When attaching flush against the wall, use the S-type bracket.

1 Connect speaker cable.

• Speaker cable is not included with this speaker system.

This speaker does not include speaker cables used for connecting

to an amplifier. Take the following factors into consideration when

•Screw (long) x 4

choosing speaker cables so that you can get the most from your

speaker system:

• Use heavy-gauge speaker cable if possible, and keep the cables

• Screw (short) x 2

to the minimum necessary length.

• Cables have differing characteristics. Keep this in mind when

using any cable.

• Non-skid pad x 1 (set)

• Connections at speaker and amplifier terminals should be

made as tight and secure as possible to help reduce contact

• Gasket (for speaker stand) x 1

resistance.

• Self-adhering fastener (hook) x 2

When mounting the speaker onto wall using the bracket, connect

• Self-adhering fastener (loop) x 2

the speaker cable before attaching speaker onto the bracket.

•Cleaning cloth x 1

• Wall mounting template x 1

• Operating instructions

Speaker system grill

The speaker system grill cannot be removed. Do not try to forcibly

remove it since doing so may damage the grille.

3

En