Pioneer HTP-SLH500: Operation (S-HV600B/S-HV500-LR) Specifications

Operation (S-HV600B/S-HV500-LR) Specifications: Pioneer HTP-SLH500

S-HV600B_S-HV500-LR_En.fm 8 ージ 2011年4月15日 金曜日 午後7時27

S-SLW500

S-HV500-LR

1 Attach one end of the supplied speaker cord to the rear

Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Closed type

of the each speaker.

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-way

Connect the wire with the colored marker to the red (+)

Woofer/Tweeter

terminal; the plain wire to the black (–) terminal. Press down

. . . . . . . . . .5.7 cm x 3 cm (Double sided) x 2pcs / 2 cm Dome type x 2pcs

the spring-loaded tab and insert the wire, as shown below.

Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Ω

Release the tab to secure the wire.

Frequency range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170 Hz to 32 kHz

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76 dB (Total 82 dB*)

Red (+)

Maximum input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Black (–)

Red colored marker

Crossover frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 kHz

Exterior dimensions

Horizontal orientation . . . 207 (W) mm x 100 (H) mm x 100 (D) mm

Vertical orientation. . . . . . 100 (W) mm x 225 (H) mm x 100 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.4 kg

Supplied accessories

Base

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Stand arm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

2 Connect the other ends of the cords to the amp’s speaker

Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

output terminals (for more details, refer to your amp

Screw (Bind head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

instruction manual).

Screw (Flat head) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Hexagonal nut. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . .1

These speaker terminals carry HAZARDOUS LIVE voltage. To

Operating instructions (this document)

prevent the risk of electric shock when connecting or

disconnecting the speaker cords, disconnect the power cord

before touching any uninsulated parts.

S-SLW500

Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex bookshelf type

After connecting the plugs, pull lightly on the cords to make

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 cm cone

sure that the ends of the cords are securely connected to the

Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Ω

terminals. Poor connections can create noise and

Frequency range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz to 2.0 kHz

interruptions in the sound.

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 dB

If the cords’ wires happen to be pushed out of the terminals,

Maximum input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

allowing the wires to come into contact with each other, it

Exterior dimensions

places an excessive additional load on the receiver. This may

Horizontal orientation . . . 435 (W) mm x 121 (H) mm x 360 (D) mm

cause the amp to stop functioning, and may even damage the

Vertical orientation. . . . . 108.5 (W) mm x 435 (H) mm x 360 (D) mm

receiver.

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4.5 kg

When using a set of speakers connected to an receiver, you

Supplied accessories

won’t be able to obtain the normal stereo effect if the polarity

Speaker cord (3 m). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

(+, –) of one of the speakers (left or right) is reversed.

Non-skid pads. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . .1

Operation (S-HV600B/S-HV500-LR)

The S-HV500-LR is shipped with two speaker systems per

Since the S-HV600B/S-HV500-LR are designed as compact

package.

satellite speakers, it is recommended that they be used in

combination with a sub-woofer to provide full base sound. In this

Specifications and design subject to possible modification

case, set your amplifier (receiver) speaker setting to “small” and

without notice, due to improvements.

the crossover frequency to 200 Hz.

* Since these speakers produce sound from both sides, the output

is doubled. Sound volume is equivalent to 82 dB with ordinary

speakers.

Specifications

© 2011 PIONEER CORPORATION.

All rights reserved.

S-HV600B

Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Closed type

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-Way

Woofer/Tweeter

. . . . . . . . . .5.7 cm x 3 cm (Double sided) x 4pcs / 2 cm Dome type x 4pcs

Impedance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8 Ω

Frequency range. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130 Hz to 32 kHz

Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 dB (Total 82 dB*)

Maximum input power. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Crossover frequency. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 kHz

Exterior dimensions . . . . . . . . . 900 (W) mm x 66 (H) mm x 93 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1.7 kg

Supplied accessories

Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Wire stays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . .1

Operating instructions (this document)

8

En