Pioneer DEH-2400UB EU: Initial settings Selecting the illumination color Selecting the key color from the illumination color list

Section

Operating this unit

Operating this unit

02

Initial settings

Normally, the FM tuning step employed by seek

The rear speaker leads output can be used for full-

When ever scroll is set to ON, recorded text infor-

English

Important

tuning is 50 kHz. When AF or TA is on, the tuning

range speaker or subwoofer connection.

mation scrolls continuously in the display. Set to

step automatically changes to 100 kHz. It may be

If you switch to SW, you can connect a rear speak-

OFF if you prefer the information to scroll just

PW SAVE (power saving) is cancelled if the ve-

preferable to set the tuning step to 50 kHz when

er lead directly to a subwoofer without using an

once.

hicle battery is disconnected and will need to be

AF is on.

auxiliary amp.

1 Press M.C. to turn the ever scroll on or off.

turned back on once the battery is reconnected.

! The tuning step remains at 50 kHz during man-

Initially, REAR-SP is set for rear full-range speaker

When PW SAVE (power saving) is off, depend-

TITLE (multi-language)

ual tuning.

connection (FUL).

ing on connection methods, the unit may con-

1 Press M.C. to select the FM tuning step.

1 Press M.C. to select the desired setting.

This unit can display the text information of a com-

tinue to draw power from the battery if your

50 (50 kHz)—100 (100 kHz)

FUL—SW

pressed audio file even if they are embedded in a

vehicle’s ignition doesn’t have an ACC (acces-

! Even if you change this setting, there will

Western European or Russian language.

sory) position.

AUTO-PI (auto PI seek)

be no output if you select OFF in SUB.W

! If the embedded language and the selected

The unit can automatically search for a different

(Refer to SUB.W (subwoofer on/off setting)

language setting are not the same, text infor-

1 Press and hold SRC/OFF until the unit

station with the same programming, even during

on the previous page).

mation may not display properly.

turns off.

preset recall.

! If you change this setting, subwoofer out-

! Some characters may not be displayed prop-

1 Press M.C. to turn Auto PI seek on or off.

put in the audio menu will return to the fac-

erly.

2 Press SRC/OFF and hold until function

tory settings.

1 Press M.C. to select the desired setting.

name appears in the display.

AUX (auxiliary input)

EUR (European)—RUS (Russian)

PREOUT (preout setting)

Activate this setting when using an auxiliary de-

3 Turn M.C. to select the initial setting.

PW SAVE (power saving)

vice connected to this unit.

The RCA outputs can be used for rear speaker or

After selecting, perform the following proce-

1 Press M.C. to turn AUX on or off.

subwoofer connection.

Switching this function on enables you to reduce

dures to set the initial setting.

If you switch to SW, you can connect a rear speak-

the consumption of battery power.

USB PNP (plug and play)

er lead directly to a subwoofer without using an

! Turning on the source is the only operation al-

CLOCK SET (setting the clock)

This setting allows you to switch your source to

auxiliary amp.

lowed when this function is on.

USB/iPod automatically.

Initially, PREOUT is set for rear full-range speaker

1 Press M.C. to turn the power save on or off.

1 Press M.C. to display the setting mode.

1 Press M.C. to turn the plug and play function

connection (SW).

2 Press M.C. to select the segment of the clock

on or off.

1 Press M.C. to select the desired setting.

display you wish to set.

ON – When a USB storage device/iPod is con-

SW—REA

Hour—Minute

Selecting the illumination color

nected, depending on the type of device, the

! Even if you change this setting, there will

3 Turn M.C. to adjust the clock.

source is automatically switched to USB/iPod

be no output if you select OFF in SUB.W

Only for DEH-3400UB

CLOCK (clock display)

when you turn on the engine. If you disconnect

(Refer to SUB.W (subwoofer on/off setting)

This unit is equipped with multiple-color illumi-

your USB storage device/iPod, this unit’s

on the previous page).

nation. You can select desired colors for the keys

You can turn the clock display on or off.

source is turned off.

! If you change this setting, subwoofer out-

and display of this unit. You also can customize

The clock display disappears temporarily when

OFF – When a USB storage device/iPod is con-

put in the audio menu will return to the fac-

the colors you want to use.

you perform other operations, but the clock dis-

nected, the source is not switched to USB/

tory settings.

play appears again after 25 seconds.

iPod automatically. Please change the source

Selecting the key color from the

1 Press M.C. to turn the clock display on or off.

DEMO (demo display setting)

to USB/iPod manually.

illumination color list

FM STEP (FM tuning step)

REAR-SP (rear output setting)

1 Press M.C. to turn the demo display on or off.

Only for DEH-3400UB

! If PW SAVE is on, DEMO cannot be selected.

You can select desired colors for the keys of this

unit.

SCROLL (scroll mode setting)

1 Press

.

En

9