Pioneer DEH-150MP: Frequently used menu operations Basic operations

Section

Operating this unit

Operating this unit

02

1 After installation of this unit, turn the

FM STEP (FM tuning step)

Removing the front panel to protect your unit from

Selecting a source

ignition switch to ON.

English

theft

1 Press SRC/OFF to cycle between:

SET UP appears.

Normally, the FM tuning step employed by seek

1 Press the detach button to release the front

TUNER (tuner)—CD (CD player)—AUX (AUX)

tuning is 50 kHz. When AF or TA is on, the tuning

panel.

2 Turn M.C. to switch to YES.

step automatically changes to 100 kHz. It may be

Adjusting the volume

2 Push the front panel upward (M) and then pull

# If you do not operate for 30 seconds, the set up

preferable to set the tuning step to 50 kHz when

1 Turn M.C. to adjust the volume.

it toward (N) you.

menu will not be displayed.

AF is on.

# If you prefer not to set up at this time, turn M.C.

! The tuning step remains at 50 kHz during man-

to switch to NO. Press to select.

ual tuning.

CAUTION

If you select NO, you cannot set up in the set up

1 Turn M.C. to select the FM tuning step.

For safety reasons, park your vehicle when re-

menu.

50 (50 kHz)—100 (100 kHz)

moving the front panel.

2 Press M.C. to confirm the selection.

3 Press M.C. to select.

QUIT appears.

Note

3 Always keep the detached front panel in a pro-

When this unit’s blue/white lead is connected to

tection device such as a protection case.

4 Perform the following procedures to set

the vehicle’s auto-antenna relay control termi-

5 To finish your settings, turn M.C. to select

the menu.

Re-attaching the front panel

nal, the vehicle’s antenna extends when this

YES.

To proceed to the next menu option, you need to

1 Slide the front panel to the left.

unit’s source is turned on. To retract the anten-

# If you prefer to change your setting again, turn

confirm your selection.

Make sure to insert the tabs on the left side of

na, turn the source off.

M.C. to switch to NO. Press to select.

the head unit into the slots on the front panel.

LANGUAGE (multi-language)

6 Press M.C. to select.

Frequently used menu

This unit can display the text information from a

Notes

operations

compressed audio file even for information em-

! You can set up the menu options from the

bedded in English or Russian.

system menu. For details about the settings,

Returning to the previous display

! If the embedded language and the selected

refer to System menu on page 6.

Returning to the previous list (the folder one level

language setting are not the same, text infor-

! You can cancel set up menu by pressing

higher)

mation may not display properly.

2 Press the right side of the front panel until it is

SRC/OFF.

1 Press

/DIMMER.

! Some characters may not be displayed prop-

firmly seated.

erly.

If you cannot attach the front panel to the

Returning to the ordinary display

1 Turn M.C. to select the desired setting.

head unit successfully, make sure that you are

Canceling the main menu

Basic operations

ENG (English)—РУС (Russian)

placing the front panel onto the head unit cor-

1 Press BAND.

2 Press M.C. to confirm the selection.

Important

rectly. Forcing the front panel into place may

Returning to the ordinary display from the list

! Handle gently when removing or attaching

CLOCK SET (setting the clock)

result in damage to the front panel or head

1 Press BAND.

the front panel.

unit.

! Avoid subjecting the front panel to excessive

1 Turn M.C. to adjust hour.

shock.

Turning the unit on

2 Press M.C. to select minute.

! Keep the front panel out of direct sunlight

1 Press SRC/OFF to turn the unit on.

3 Turn M.C. to adjust minute.

and high temperatures.

4 Press M.C. to confirm the selection.

Turning the unit off

! To avoid damaging the device or vehicle inte-

1 Press and hold SRC/OFF until the unit turns

rior, remove any cables and devices attached

off.

to the front panel before detaching it.

En

3