Главная > Инструкция к Ноутбуку Dell Latitude D510 >  Flashing the BIOS

Dell Latitude D510:  Flashing the BIOS

 Flashing the BIOS : Dell Latitude D510

Back to Contents Page

Flashing the BIOS

Dell™Latitude™D510ServiceManual

1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.

2. Turn on the computer and press <F12> during POST to access the Boot Menu.

3. Insert the flash BIOS update program floppy or CD and select boot from "CD/DVD/CD-RW Drive".

4. Select "Upgrade your system BIOS" from the menu.

Follow the instructions that appear on the screen. The computer continues to boot and updates the new BIOS. When the update is complete, the

computer automatically reboots.

5. Remove the flash BIOS update program floppy or CD from the drive.

Back to Contents Page

NOTICE: To avoid damaging the system board, ensure you are connected to a known good electrical outlet and that you do not interrupt the BIOS flash

process. Loss of power or an interruption during the BIOS flash process can cause damage to the system board.

NOTE: If you wait too long and the operating system logo appears, continue to wait until you see the Microsoft®Windows®desktop. Then, shut down

your computer and try again.

NOTE: To enter the system setup program, press <F2> during POST. Press <Esc> and select Save/Exit if you make modifications; otherwise, select Exit

and then press <Enter> to exit the system setup.

Оглавление

Топ 10 инструкций

Другие инструкции

Dell Latitude D530 Dell Latitude D530 Dell Latitude D520 Dell Latitude D520 Dell Latitude D505 Dell Latitude D505 Dell Latitude D500 Dell Latitude D500