Dell Latitude D510: Internal Card With Bluetooth®Wireless Technology
Internal Card With Bluetooth®Wireless Technology : Dell Latitude D510
Back to Contents Page
Internal Card With Bluetooth®Wireless Technology
Dell™Latitude™D510ServiceManual
1. Follow the instructions in "Preparing to Work Inside Your Computer."
2. Remove the hard drive.
3. Turn the computer upside down.
4. Pull the card connector out of the system board connector.
5. Pull the card cable to remove the internal card with Bluetooth wireless technology from the computer.
To replace the internal card with Bluetooth wireless technology:
1. Insert the internal card with Bluetooth wireless technology.
2. Ensure that the card cable is routed under the tab.
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's
electronic components. You can do so by touching an unpainted metal surface.
NOTICE: When replacing the internal card with Bluetooth wireless technology, ensure that the card cable is routed correctly so that you do not damage
the cable when you install the hard drive.
1
internal card with Bluetooth wireless technology
2
system board connector
3
card connector
4
card cable
3. Connect the card cable.
4. Replace the hard drive.
Back to Contents Page
1
cable
2
tab
Оглавление
- Dell™Latitude™D510ServiceManual
- Before You Begin
- Flashing the BIOS
- Internal Card With Bluetooth®Wireless Technology
- Coin Cell Battery
- Microprocessor Module
- Display Assembly and Display Latch
- Fan
- Hard Drive
- Keyboard
- Base Latch
- Palm Rest
- Pin Assignments for I/O Connectors
- Speakers
- System Board
- System Components
- Microprocessor Thermal-Cooling Assembly
- Memory Module, Modem, Mini PCI Card, and Optical Devices
