Dell Latitude D510: Fan
Fan : Dell Latitude D510
Back to Contents Page
Fan
Dell™Latitude™D510ServiceManual
1. Follow the instructions in "Preparing to Work Inside Your Computer."
2. Remove the keyboard.
3. Remove the palm rest.
4. Pull straight up on the fan cable connector to disconnect it from the system board connector.
5. Free the fan cable from the cable routing pegs on the system board.
6. Remove the two M2.5 x 8-mm screws from the fan, and pull the fan away from the system board.
CAUTION: Before performing the following procedures, read the safety instructions in your Product Information Guide.
NOTICE: To prevent damage to components inside your computer, discharge static electricity from your body before you touch any of your computer's
electronic components. You can do so by touching an unpainted metal surface.
1
fan cable routing
2
fan cable connector
1
M2.5 x 8-mm screws (2)
2
fan
3
fan cable connector
Back to Contents Page
4
system board connector
Оглавление
- Dell™Latitude™D510ServiceManual
- Before You Begin
- Flashing the BIOS
- Internal Card With Bluetooth®Wireless Technology
- Coin Cell Battery
- Microprocessor Module
- Display Assembly and Display Latch
- Fan
- Hard Drive
- Keyboard
- Base Latch
- Palm Rest
- Pin Assignments for I/O Connectors
- Speakers
- System Board
- System Components
- Microprocessor Thermal-Cooling Assembly
- Memory Module, Modem, Mini PCI Card, and Optical Devices