Pioneer HTP-SL100: Connection Specifications Operation (S-SL100-LR/S-SL100CR)

S-SL100-LR_S-SL100CR_En.fm 5 ページ ２０１１年４月１２日　火曜日　午前１１時３１分

Connection

Specifications

Connecting the cord

S-SL100-LR/S-SL100CR

1 Attach one end of the supplied speaker cord to the rear

Enclosure. . . . . . . . Closed-box bookshelf type (magnetically shielded)

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . 10 cm x 7 cm, full range

of the each speaker.

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Ω

English

• Connect the wire with the colored marker to the red (+)

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Hz to 20 kHz

terminal; the plain wire to the black (–) terminal. Press down

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81 dB

the spring-loaded tab and insert the wire, as shown below.

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

Release the tab to secure the wire.

Exterior dimensions . . . . . . 86.5 (W) mm x 206 (H) mm x 85.5 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.7 kg

Red (+)

Black (–)

Red colored marker

Supplied accessories (S-SL100-LR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

Operating instructions (this document)

Supplied accessories (S-SL100CR)

Speaker cord (4 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Speaker cord (10 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 Connect the other ends of the cords to the amp’s speaker

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

output terminals (for more details, refer to your amp

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

instruction manual).

Operating instructions (this document)

S-SLW500

Enclosure. . . . . . . . . . . . . . . . . . . . . . . . . . . . Bass-reflex bookshelf type

• These speaker terminals carry HAZARDOUS LIVE voltage. To

Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 cm cone

prevent the risk of electric shock when connecting or

Impedance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Ω

disconnecting the speaker cords, disconnect the power cord

Frequency range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Hz to 2.0 kHz

before touching any uninsulated parts.

Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78 dB

• After connecting the plugs, pull lightly on the cords to make

Maximum input power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 W

sure that the ends of the cords are securely connected to the

Exterior dimensions

terminals. Poor connections can create noise and

Horizontal orientation. . . . 435 (W) mm x 121 (H) mm x 360 (D) mm

interruptions in the sound.

Vertical orientation . . . . .108.5 (W) mm x 435 (H) mm x 360 (D) mm

Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5 kg

• If the cords’ wires happen to be pushed out of the terminals,

allowing the wires to come into contact with each other, it

Supplied accessories

places an excessive additional load on the receiver. This may

Speaker cord (3 m) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

cause the amp to stop functioning, and may even damage the

Non-skid pads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

receiver.

Seal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

• When using a set of speakers connected to an receiver, you

Warranty card (European model only) . . . . . . . . . . . . . . . . . . . . . . . . . 1

won’t be able to obtain the normal stereo effect if the polarity

(+, –) of one of the speakers (left or right) is reversed.

• The S-SL100-LR is shipped with two speaker systems per

package.

Operation (S-SL100-LR/S-SL100CR)

• The S-SL100CR is shipped with three speaker systems per

package.

• Specifications and design subject to possible modification

Since the S-SL100-LR/S-SL100CR are designed as compact

without notice, due to improvements.

satellite speakers, it is recommended that they be used in

combination with a sub-woofer to provide full base sound. In this

case, set your amplifier (receiver) speaker setting to “small” and

the crossover frequency to 200 Hz.

is a trademark placed on a product with Pioneer’s Phase

Control technology. This technology enables high-grade sound

reproduction through each component by improving overall

phase matching.

© 2011 PIONEER CORPORATION.

All rights reserved.

5

En