Dell Precision 350: I/O Panel
I/O Panel : Dell Precision 350
Back to Contents Page
I/O Panel
DellPrecision™Workstation350ServiceManual
Removing the I/O Panel
1. Disconnect the control-panel cable from the control-panel connector on the I/O panel. Disconnect the I/O cable from the I/O panel.
Note the routing of the control-panel cable as you remove it from the computer so that you can replace it correctly.
2. Remove all cables that are connected to the I/O panel, such as the chassis intrusion switch and internal speaker cables.
3. From inside the chassis cover, remove the mounting screw that secures the I/O panel to the chassis.
4. Remove the I/O panel from the chassis.
Replacing the I/O Panel
To replace the I/O panel, follow the removal procedures in reverse order.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the System Information Guide.
1
internal speaker cable
2
chassis intrusion switch cable
3
I/O panel
4
mounting screw
5
control-panel cable
6
front audio cable
7
I/O cable
