Pioneer VSX-S310-S: Initial Setup Before you start Automatically setting up for surround sound (MCACC)

English

Initial Setup

Before you start

Automatically setting up for surround sound (MCACC)

Français

1

Put the batteries in the remote control.

The Auto Multi-Channel ACoustic Calibration (MCACC) setup

2

Press BD button on the remote control to

uses the supplied setup microphone to measure and analyze

switch to BD entry.

the test tone that is outputted by the speakers. This setup

enables automatic high precision measuring and settings;

3

Press

Deutsch

utilizing it will create an optimum user listening environment.

Important

• Measure in a quiet environment.

The batteries included with the unit are to check initial

• If you have a tripod, use it to place the microphone so

operations; they may not last over a long period. We

that it’s about ear level at your normal listening position.

Italiano

recommend using alkaline batteries that have a longer life.

Otherwise, place the microphone at ear level using a table

2

Switch on the receiver and your TV.

or a chair.

• Accurate measurements may not be possible if there are

obstacles between the speakers and the listening position

(microphone).

Nederlands

• When measuring, step away from the listening position,

and operate using the remote control from the external

side of all the speakers.

3

Switch the TV input so that it connects to the

1

Connect the supplied setup microphone.

receiver.

Español

4

Turn the powered subwoofer on and turn up

MCACC

SETUP

MIC

the volume.

WARNING

• Do not use or store batteries in direct sunlight or other

excessively hot place, such as inside a car or near a

heater. This can cause batteries to leak, overheat, explode

or catch fire. It can also reduce the life or performance of

batteries.

CAUTION

• When inserting the batteries, make sure not to damage

the springs on the battery’s (–) terminals. This can cause

batteries to leak or overheat.

• When disposing of used batteries, please comply with

governmental regulations or environmental public

institution’s rules that apply in your country/area.

7

on the remote control, then

press the HOME MENU button.

The Home Menu appears on your TV.

4

Select ’Auto MCACC’ from the Home Menu,

then press ENTER.

Automatic measuring will start.

Home Menu

1

. Auto MCACC

1

. Auto MCACC

Now Analyzing

2

. Manual SP Setup

3

. Input Assign

Environment Check

4. Auto Power Down

Ambient Noise

5. HDMI Setup

Speaker YES/NO

6. Network Standby

7. MHL Setup

8. Speaker System

9. OSD Setup

Return

VSX-S510

• Measuring will take about 3 to 12 minutes.

5

Follow the instructions on-screen.

• Automatic setting is complete when the Home Menu

screen appears.

6

Make sure the setup microphone is

disconnected.

Microphone

Tripod