Pioneer S-71W: TROUBLESHOOTING SYMPTOM CAUSE REMEDY
TROUBLESHOOTING SYMPTOM CAUSE REMEDY: Pioneer S-71W
Table of contents
- IMPORTANT VENTILATION CAUTION Operating Environment POWER-CORD CAUTION
- CONTENTS INSTALLATION ACCESSORY ITEMS FEATURES IN COMBINATION WITH SPEAKERS
- MAINTENANCE OF EXTERNAL SURFACES: Installation Precautions
- PANEL FACILITIES FRONT PANEL REAR PANEL
- CONNECTIONS LINE LEVEL CONNECTION SPECIFICATIONS CONNECTING THE POWER CORD OPERATION
- TROUBLESHOOTING SYMPTOM CAUSE REMEDY

01_S_71W_En.book 8 ページ 2009年8月24日 月曜日 午後4時42分
TROUBLESHOOTING
Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is
something wrong with this component, check the points below. Sometimes the trouble may lie
in another component. Investigate the other components and electrical appliances being used.
If the trouble cannot be rectified even after exercising the checks listed below, ask your nearest
PIONEER authorized service center or your dealer to carry out repair work.
SYMPTOM CAUSE REMEDY
1 No power is being supplied
• Power supply plug is not
• Insert plug securely.
(Indicator does not light
correctly inserted.
up when power switch is
turned on.)
2No sound
• Connection of accessory
• Check again and connect
(Indicator is lit blue.)
RCA plug cord is wrong or
correctly.
disconnected.
• VOLUME knob is set to
• Turn clockwise slowly.
MIN.
3 Sound is distorted. • Level is too high.
•Turn the VOLUME knob
counter-clockwise to lower
the level.
• Input level is too high.
• Turn the amplifier’s output
level (volume, bass control,
bass boost) counter-
clockwise to lower the level.
4 Howling noise occurs. • No power supplied to the
• Connect an amplifier and
amplifier.
supply power.
• Subwoofer level is set too
• Place the subwoofer a good
high.
distance from speakers.
Turn the VOLUME knob
counter-clockwise to lower
the volume.
5 Much noise when
• The AM loop antenna or
• Increase the distance
listening to AM or FM
the FM indoor antenna is
between the AM or FM
close to this unit.
antenna (for indoor use)
broadcasts.
and this unit.
6 Sound is broken. • Auto standby function is
• Turn the auto standby
on.
function off.
7No sound
• No input signal. • Turn the auto standby
(Indicator is lit red.)
function off.
8
En

