Dell PowerEdge VRTX – страница 7
Инструкция к Компьютеру Dell PowerEdge VRTX
Оглавление
Error Code Message Information
Action Check system hardware inventory and software configuration.
SEC0600
Message A secure mode violation detected.
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0602
Message User password violation detected.
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0604
Message A setup password violation detected.
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0606
Message The network boot password violation detected.
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0608
Message A password violation detected.
Details This may apply to a physical or remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEC0610
Message An Out-of-band password violation detected.
Details This may apply to a remote access attempt.
Action Check system logs for intrusion attempts, and ensure strong
password policies.
SEL0002
Message Logging is disabled.
Details This message is displayed when event logging of a specific type is
disabled by the user.
121
Error Code Message Information
Action If unintended, re-enable logging.
SEL0006
Message All event logging is disabled.
Details This message is displayed when all event logging has been disabled
by the user.
Action If unintended, re-enable logging.
SEL0008
Message Log is full.
Details When the event log is full, additional events are not written to the log.
Older events may be overwritten and lost. This message may also
appear if the user disabled event logging.
Action Backup and clear log.
SEL0010
Message Log is almost full.
Details When the event log is full, additional events are not written to the log.
Older events may be overwritten and lost.
Action Backup and clear log at the next maintained time.
SEL0012
Message Could not create or initialize the system event log.
Details If the system event log fails to initialize, platform status and failure
events are not captured. Some management software do not report
platform exceptions.
Action Reboot the management controller or iDRAC. Cycle system input
power. If problem persists call support.
SEL1204
Message An unknown system hardware failure detected.
LCD Message Unknown system hardware failure.
Details If the system event log failed to initialize platform status and failure
events are not captured. Some management software will not report
platform exceptions.
Action Re-configure system to minimum supported configuration. If issues
persists, contact support.
SEL1209
Message The platform event filter action failed.
Details System policies or permissions may prevent the action from
executing. If configured, the system does not execute the action on
122
Error Code Message Information
a platform event (such as power down, cycle, interrupt, and send
alert).
Action Review platform event configuration.
SEL1211
Message The time-stamp clock could not be synchronized.
Details The time stamp on system event log events may not correlate to the
system time.
Action Cycle system input power. If problem persists, contact support.
SEL1300
Message No bootable media found.
Details System setup displays the system boot order. The local video screen
may also show additional information. (IPMI sensor type code 1eh -
offset 00h).
Action Check system boot settings. Check if mass storage controller
configuration settings are applicable.
SEL1302
Message Non-bootable diskette detected.
Details The disk in the drive is not formatted correctly or does not contain the
necessary operating system files.
Action Replace diskette with a bootable disk.
SEL1304
Message The PXE server not found.
Details PXE is one way to boot a system from the network.
Action Check the network and PXE server configuration.
SEL1306
Message Invalid boot sector found.
Details The disk in the drive is not formatted correctly or does not contain the
necessary operating system files.
Action Replace diskette with a bootable disk.
SEL1308
Message A time-out occurred while waiting for user to select a boot source.
Details The system has failed to boot to an operating system and needs the
user to select a boot source.
Action Select boot source within the time allowed.
SEL1501
Message Chassis management controller (CMC) redundancy is lost.
123
Error Code Message Information
Details An action or failure has taken place that breaks CMC redundancy.
Action Check the CMC network cables and network connections. Check that
CMC firmware versions match.
SEL1502
Message Chassis management controller (CMC) redundancy is degraded.
Details An action or failure has taken place that breaks CMC redundancy.
Action Check the CMC network cables and network connections. Check that
CMC firmware versions match.
SEL1504
Message The chassis management controller (CMC) is not redundant.
Insufficient resources to maintain normal operations.
Details There is not enough available power for two CMC's to operate.
Action Check the overall power consumption and power status.
SEL1506
Message Lost communications with Chassis Group Member <
number
>.
Details The primary CMC has lost communication with the indicated member
CMC.
Action Check the network cable and network connections.
SEL1508
Message Member <
number
> could not join the Chassis Group.
Details The indicated member CMC is a leader of a different CMC stacking
group.
Action Check if member CMC is a leader of a different chassis group.
SEL1510
Message An authentication error detected for Chassis Group Member
<
number
>.
Details Group master CMC could not log into the group member CMC.
Action Check the login credentials of CMC.
SEL9900
Message An unsupported event occurred.
Details The current software version cannot decode this event. You may
need to review this event using a tool which displays raw data such
as Ipmitool with the -vvv option or Racadm with the -E option.
Action Upgrade the management software.
124
Error Code Message Information
SWC4004
Message A firmware or software incompatibility detected between iDRAC in
slot <
number
> and CMC.
Details FlexAddress is not implemented in one of the versions of firmware.
Action Check the firmware versions of iDRAC and CMC. Update with the
latest version.
SWC4006
Message A firmware or software incompatibility detected between system
BIOS in slot <
number
> and CMC.
Details FlexAddress is not implemented in one of the versions of firmware.
Action Check the firmware versions of BIOS and CMC. Update with the latest
version.
SWC4008
Message A firmware or software incompatibility detected between CMC 1 and
CMC 2.
Details FlexAddress is not implemented in one of the versions of firmware.
Please update the firmware.
Action Check firmware versions. Update CMC 1 and CMC 2 firmware to
match.
SWC5001
Message <
name
> upgrade failed.
Action Reboot the system and attempt the upgrade again.
TMP0100
Message The system board <
name
> temperature is less than the lower
warning threshold.
LCD Message System board <
name
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0101
Message The system board <
name
> temperature is less than the lower critical
threshold.
LCD Message System board <
name
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0102
Message The system board <
name
> temperature is greater than the upper
warning threshold
125
Error Code Message Information
LCD Message System board <
name
> temperature is outside of range.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action The system board <
name
> temperature is outside of the optimum
range. Check the fans.
TMP0103
Message The system board <
name
> temperature is greater than the upper
critical threshold.
LCD Message System board <
name
> temperature is outside of range.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action The system board <
name
> temperature is outside of the optimum
range. Check the fans.
TMP0104
Message The system board <
name
> temperature is outside of range.
LCD Message System board <
name
> temperature is outside of range.
Details Ambient air temperature is too warm or cool.
Action The system board <
name
> temperature is outside of the optimum
range. Check Fans.
TMP0106
Message The memory module <
number
> temperature is less than the lower
warning threshold.
LCD Message Memory module <
number
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0107
Message The memory module <
number
> temperature is less than the lower
critical threshold.
LCD Message Memory module <
number
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0108
Message The memory module <
number
> temperature is greater than the upper
warning threshold.
LCD Message Memory module <
number
> temperature is outside of range. Check
Fans.
126
Error Code Message Information
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action The system board <
name
> temperature is outside of the optimum
range. Check Fans.
TMP0109
Message The memory module <
number
> temperature is greater than the upper
critical threshold.
LCD Message Memory module <
number
> temperature is outside of range. Check
Fans.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action The system board <
name
> temperature is outside of the optimum
range. Check Fans.
TMP0110
Message The memory module <
number
> temperature is outside of range.
LCD Message Memory module <
number
> temperature is outside of range. Check
Fans.
Details Ambient air temperature is too warm or cool.
Action Check the system operating environment.
TMP0112
Message The <
name
> temperature is less than the lower warning threshold.
LCD Message The <
name
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0113
Message The <
name
> temperature is less than the lower critical threshold.
LCD Message The <
name
> temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0114
Message The <
name
> temperature is greater than the upper warning
threshold.
LCD Message The <
name
> temperature is outside of range. Check Fans
Details Ambient air temperature is too warm or one or more fans may have
failed.
127
Error Code Message Information
Action Check the system operating environment and review event log for fan
failures.
TMP0115
Message The <
name
> temperature is greater than the upper critical threshold.
LCD Message The <
name
> temperature is outside of range. Check Fans
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action Check the system operating environment and review event log for fan
failures.
TMP0116
Message The <
name
> temperature is outside of range.
LCD Message The <
name
> temperature is outside of range. Check Fans
Action Check the system operating environment and review event log for fan
failures.
TMP0118
Message The system inlet temperature is less than the lower warning
threshold.
LCD Message System inlet temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0119
Message The system inlet temperature is less than the lower critical threshold.
LCD Message System inlet temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0120
Message The system inlet temperature is greater than the upper warning
threshold.
LCD Message System inlet temperature is outside of range.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action Check the system operating environment and review event log for fan
failures.
TMP0121
Message The system inlet temperature is greater than the upper critical
threshold.
128
Error Code Message Information
LCD Message System inlet <
name
> temperature is outside of range. Check Fans.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action Check the system operating environment and review event log for fan
failures.
TMP0122
Message The system inlet temperature is outside of range.
LCD Message System inlet <
name
> temperature is outside of range. Check Fans.
Details Ambient air temperature is too warm or cool.
Action Check the system operating environment and review event log for fan
failures.
TMP0100
Message Disk drive bay temperature is less than the lower warning threshold.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0104
Message Disk drive bay temperature is less than the lower critical threshold.
LCD Message Disk drive bay temperature is outside of range. Check Fans.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0126
Message Disk drive bay temperature is greater than the upper warning
threshold.
LCD Message Disk drive bay temperature is outside of range. Check Fans.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action Check the system operating environment and review event log for fan
failures.
TMP0128
Message Disk drive bay temperature is outside of the allowable range.
LCD Message Disk drive bay temperature is outside of range. Check Fans.
Details Ambient air temperature is too warm or cool.
Action Check the system operating environment and review event log for fan
failures.
129
Error Code Message Information
TMP0130
Message The control panel temperature is less than the lower warning
threshold.
LCD Message Control panel temperature is outside of range.
Details Ambient air temperature is too cool.
Action Check the system operating environment.
TMP0132
Message The control panel temperature is greater than the upper warning
threshold.
LCD Message Control panel temperature is outside of range.
Details Ambient air temperature is too warm or one or more fans may have
failed.
Action Check the system operating environment and review event log for fan
failures.
TMP0134
Message The control panel temperature is outside of the allowable range.
LCD Message Control panel temperature is outside of range.
Details Ambient air temperature is too warm or cool.
Action Check the system operating environment and review event log for fan
failures.
VLT0100
Message Processor module <
name
> voltage is less than the lower warning
threshold.
LCD Message Processor module <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0101
Message Processor module <
name
> voltage is less than the lower critical
threshold.
LCD Message Processor module <
name
> voltage is outside of range.
130
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0102
Message Processor module <
name
> voltage is greater than the upper warning
threshold.
LCD Message Processor module <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0103
Message Processor module <
name
> voltage is greater than the upper critical
threshold.
LCD Message Processor module <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0104
Message Processor module <
name
> voltage is outside of the allowable range.
LCD Message Processor module <
name
> voltage is outside of range.
131
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0200
Message The system board <
name
> voltage is less than the lower critical
threshold.
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Remove the processor module. Inspect processor socket for
bent pins.
3. If the issue persists, see Getting Help.
VLT0201
Message The system board <
name
> voltage is less than the lower warning
threshold.
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0202
Message The system board <
name
> voltage is greater than the upper warning
threshold.
LCD Message System board voltage is outside of range.
132
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0203
Message The system board <
name
> voltage is greater than the upper critical
threshold.
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0204
Message The system board <
name
> voltage is outside of the allowable range.
LCD Message System board voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0206
Message The memory module <
number
> <
name
> voltage is less than the lower
warning threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
133
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0207
Message The memory module <
number
> <
name
> voltage is less than the lower
critical threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0208
Message The memory module <
number
> <
name
> voltage is greater than the
upper warning threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0209
Message The memory module <
number
> <
name
> voltage is greater than the
upper critical threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
134
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0210
Message The memory module <
number
> <
name
> voltage is outside of range.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0212
Message The disk drive bay <
name
> voltage is less than the lower warning
threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0213
Message The disk drive bay <
name
> voltage is less than the lower critical
threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
135
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0214
Message The disk drive bay <
name
> voltage is greater than the upper critical
threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0215
Message The disk drive bay <
name
> voltage is greater than the upper critical
threshold.
LCD Message The disk drive bay <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0216
Message The <
name
> voltage is outside of range.
LCD Message The <
name
> voltage is outside of range.
136
Error Code Message Information
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0218
Message The <
name
> voltage is less than the lower warning threshold.
LCD Message The <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0219
Message The <
name
> voltage is less than the lower critical threshold.
LCD Message The <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0220
Message The <
name
> voltage is greater than the upper warning threshold.
LCD Message The <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
137
Error Code Message Information
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0221
Message The <
name
> voltage is greater than the upper critical threshold.
LCD Message The <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0222
Message The <
name
> voltage is outside of range.
LCD Message The <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0224
Message The memory module <
name
> voltage is less than the lower warning
threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
138
Error Code Message Information
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0225
Message The memory module <
name
> voltage is less than the lower critical
threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0226
Message The memory module <
name
> voltage is greater than the upper
warning threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0227
Message The memory module <
name
> voltage is greater than the upper critical
threshold.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
139
Error Code Message Information
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0228
Message The memory module <
name
> voltage is outside of range.
LCD Message Memory module <
number
> <
name
> voltage is outside of range.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-configure the system to minimum configuration, inspect and
reinstall system cables.
3. If the issue persists, see Getting Help.
VLT0230
Message The PCIe mezzanine card <
number
> <
name
> voltage is less than the
lower warning threshold.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
2. Re-seat the PCIe mezzanine card.
3. If the issue persists, see Getting Help.
VLT0231
Message The PCIe mezzanine card <
number
> <
name
> voltage is less than the
lower critical threshold.
Details System hardware detected an over voltage or under voltage
condition.
If multiple voltage exceptions occur consecutively the system may
power down in fail-safe mode.
Action
1. Review system logs for power supply exceptions.
140
