Dell Latitude D610: Base Latch
Base Latch : Dell Latitude D610
Back to Contents Page
Base Latch
Dell™Latitude™D610ServiceManual
Removing the Base Latch
Installing the Base Latch
Removing the Base Latch
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the center control cover (see "Removing the Center Control Cover").
3. Remove the keyboard (see "Removing the Keyboard").
4. Remove the display assembly (see "Removing the Display Assembly").
5. Remove the palm rest (see "Removing the Palm Rest").
6. Remove the speaker assembly (see "Removing the Speaker Assembly").
7. Pull the base latch straight up and out of the computer base (no screws secure it in place).
Installing the Base Latch
1. Slide the latch over the notch located in the center of the system base.
2. Replace the speaker assembly to secure the latch in place.
Back to Contents Page
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
base latch
2
computer base
Оглавление
- Dell™Latitude™D610ServiceManual
- Before You Begin
- Flashing the BIOS
- Internal Card With Bluetooth® Wireless Technology
- Coin-Cell Battery
- Microprocessor Module
- Display Assembly and Display Latch
- Fan
- Hard Drive
- Center Control Cover
- Keyboard
- Base Latch
- Mini PCI Card
- Palm Rest
- Pin Assignments for I/O Connectors
- Speaker Assembly
- System Board
- System Components
- Microprocessor Thermal-Cooling Assembly
- Memory Module, Modem, and Devices