Pioneer X-SMC00BT: Chapter 7: USB playback Playing USB storage devices

;60&B6<;(B(QERRN࣮࣌ࢪ㸰㸮㸯㸱ᖺ㸯᭶㸰㸯᪥ࠉ᭶᭙᪥ࠉ༗ᚋ㸳󰪍㸯㸴ศ

USB playback07

Chapter 7:

USB playback

Repeat play

Repeat play can play one track, all tracks or a programmed

Playing USB storage devices

sequence continuously.

It is possible to listen to two-channel audio using the USB

interface on the front of this receiver.

To repeat one track:

• Pioneer does not guarantee that any file recorded on a

Press REPEAT repeatedly until “RPT ONE” appears. Press

USB storage device will play or that power will be

ENTER.

supplied to a USB storage device. Also note that Pioneer

will accept no responsibility whatsoever for loss of files

To repeat all tracks:

on USB storage devices caused by connection to this

Press REPEAT repeatedly until “RPT ALL” appears. Press

unit.

ENTER.

1 Press

USB

as the input source.

To repeat desired tracks:

“USB/IPOD” is shown on the main display.

Perform steps 1 to 5 in “Programmed play (CD or MP3/WMA)”

section on next page and then press REPEAT repeatedly until

2 Connect the USB storage device.

“RPT ALL” appears. Press ENTER.

The number of folders or files stored on the connected USB

storage device appear on the main display automatically.

To cancel repeat play:

• This receiver does not support a USB hub.

Press REPEAT repeatedly until “RPT OFF” appears. Press

• If an iPod/iPhone/iPad mini is connected to the unit, the

ENTER.

unit will automatically begin charging it.

Note

• After performing repeat play, be sure to press #.

Otherwise, the file of USB storage device will play

continuously.

• During repeat play, random play is not possible.

Random play

The file of USB storage device can be played in random order

automatically.

USB storage device

To random play all tracks:

(commercially available)

Press RANDOM repeatedly until “RDM ON” appears. Press

ENTER.

To cancel random play:

3 When the recognition is completed, press

Press RANDOM repeatedly until “RDM OFF” appears. Press

!

to start playback.

ENTER.

• When changing to a different input source, stop the USB

memory playback first, before changing.

Note

4 Disconnect USB storage device from the

• If you press the , during random play, you can move

iPod/iPhone terminal.

to the track selected next by the random operation. On

Turn the power off before removing the USB storage device.

the other hand, the + does not allow you to move to

the previous track. The beginning of the track being

Note

played will be located.

• USB flash drive that supports USB 2.0 can be used.

• In random play, the unit will select and play tracks

• This unit may not recognize a USB storage device, play

automatically. (You cannot select the order of the

files or supply power to a USB storage device. For

tracks.)

details, see When a USB storage device is connected on

• During random play, repeat play is not possible.

page 32.

• When a USB storage device is not playing and no

operations have been performed for more than 30

minutes, the unit will automatically power off.

22

En