Pioneer KURO KRP-TS02: Attaching the Pioneer Display and Television

13

En

English

2

  Securing the Pioneer display and television 

with Installation screws.

Secure the parts marked with the arrows (holes marked 

"T") using a Phillips screwdriver.

[PDP-LX5090 / PDP-LX5090H / PDP-LX509A / PDP-C509A]

KRP-TS02 / PDK-TS33A / PDK-TS33

Upper .................... Installation screw 

➁

 (M8 × 40 mm: black)

Bottom ...................Installation screw 

➃

 (M8 × 15 mm: black)

[KRP-500P / KRP-500M]

KRP-TS02

Upper .................... Installation screw 

➂

 (M8 × 23 mm: black)

Bottom ...................Installation screw 

➃

 (M8 × 15 mm: black)

�����

����

�������������������

�

��������������������

���������������������

�

��������������������

��������������������

�

�

�������������������

The weight of a Pioneer display and television is 

about 30 kg (66 lbs), they have no depth, and are 

unstable. Therefore, at least two people must 

assemble and install them.

����

•  Be sure to install it on a flat stable location.

•  Insert the screws in the holes vertically and securely tighten.

•  Place a sheet or other material under the display to prevent 

scratches or damage to it.

•  After manually turning the screw lightly two or three times, 

tighten it with a screw-driver.

1

  Attaching the Pioneer display and 

television to the stand.

Lay the Pioneer display and television down flat. Align the 

stand supports with the Pioneer display and television 

stand slots, and slowly insert the supports horizontally.

Please ensure that the stand supports do not come into 

contact with anything other than the Pioneer display and 

television stand slots. Contact with any other area may 

result in scratching or deformation of the display's rear 

side or terminals.

�����

����

����

When laying down the Pioneer display and television, be 

careful so as to not scratch or damage it.

Attaching the Pioneer Display and Television

�������