Pioneer DEH-140UBB: Initial settings Audio adjustments

Section

02

Operating this unit

Operating this unit

Function settings

FAD/BAL (fader/balance adjustment)

SLA (source level adjustment)

CLOCK SET (setting the clock)

1 Press M.C. to display the main menu.

SLA (Source level adjustment) lets you adjust the

1 Press M.C. to display the setting mode.

1 Press M.C. to display the setting mode.

volume level of each source to prevent radical

2 Press M.C. to cycle between fader (front/rear)

2 Press M.C. to select the segment of the clock

2 Turn M.C. to change the menu option

changes in volume when switching between sour-

and balance (left/right).

display you wish to set.

and press to select FUNCTION.

ces.

3 Turn M.C. to adjust speaker balance.

Hour—Minute

! Settings are based on the FM volume level,

3 Turn M.C. to select the function.

3 Turn M.C. to adjust the clock.

PRESET EQ (equalizer recall)

which remains unchanged.

After selecting, perform the following proce-

! The MW/LW volume level can also be adjusted

FM STEP (FM tuning step)

dures to set the function.

1 Press M.C. to display the setting mode.

with this function.

Normally, the FM tuning step employed by seek

2 Turn M.C. to select the equalizer.

! When selecting FM as the source, you cannot

REPEAT (repeat play)

tuning is 50 kHz. When AF or TA is on, the tuning

DYNAMIC—VOCAL—NATURAL—CUSTOM

switch to SLA.

step automatically changes to 100 kHz. It may be

—FLAT—POWERFUL

1 Press M.C. to display the setting mode.

1 Press M.C. to select a repeat play range.

preferable to set the tuning step to 50 kHz when

3 Press M.C. to confirm the selection.

2 Turn M.C. to adjust the source volume.

For details, refer to Selecting a repeat play range

AF is on.

! You can also switch the equalizer by pressing

Adjustment range: +4 to –4

on the previous page.

! The tuning step remains at 50 kHz during man-

(EQ) repeatedly.

3 Press M.C. to confirm the selection.

ual tuning.

RANDOM (random play)

TONE CTRL (equalizer adjustment)

1 Press M.C. to select the FM tuning step.

50 (50 kHz)—100 (100 kHz)

1 Press M.C. to turn random play on or off.

! Adjusted equalizer curve settings are stored in

Initial settings

CUSTOM.

AUTO-PI (auto PI seek)

PAUSE (pause)

Important

1 Press M.C. to display the setting mode.

The unit can automatically search for a different

PW SAVE (power saving) is cancelled if the ve-

2 Press M.C. to select BASS (bass)/MID (mid)/

1 Press M.C. to pause or resume.

station with the same programming, even during

hicle battery is disconnected and will need to be

TREBLE (treble).

preset recall.

S.RTRV (sound retriever)

turned back on once the battery is reconnected.

3 Turn M.C. to adjust the level.

1 Press M.C. to turn Auto PI seek on or off.

When PW SAVE (power saving) is off, depend-

Adjustment range: +6 to –6

Automatically enhances compressed audio and

ing on connection methods, the unit may con-

AUX (auxiliary input)

restores rich sound.

LOUD (loudness)

tinue to draw power from the battery if your

1 Press M.C. to select the desired setting.

vehicle’s ignition doesn’t have an ACC (acces-

Activate this setting when using an auxiliary de-

Loudness compensates for deficiencies in the low-

For details, refer to Enhancing compressed

sory) position.

vice connected to this unit.

frequency and high-frequency ranges at low vol-

audio and restoring rich sound (sound retriever)

1 Press M.C. to turn AUX on or off.

on the previous page.

ume.

1 Press and hold SRC/OFF until the unit

1 Press M.C. to select the desired setting.

USB PNP (plug and play)

turns off.

OFF (off)—LOW(low)—HI (high)

This setting allows you to switch your source to

Audio adjustments

2 Display the function name.

USB automatically.

# (DEH-142UB, DEH-140UB and DEH-140UBB)

1 Press M.C. to turn the plug and play function

1 Press M.C. to display the main menu.

Press SRC/OFF and hold until function name ap-

on or off.

pears in the display.

ON – When USB storage device is connected,

2 Turn M.C. to change the menu option

# (DEH-141UB)

depending on the type of device, the source is

and press to select AUDIO.

Press M.C. and hold until function name appears in

automatically switched to USB when you turn

the display.

on the engine. If you disconnect your USB stor-

3 Turn M.C. to select the audio function.

age device, this unit’s source is turned off.

After selecting, perform the following proce-

3 Turn M.C. to select the initial setting.

OFF – When USB storage device is connected,

dures to set the audio function.

After selecting, perform the following proce-

the source is not switched to USB automati-

dures to set the initial setting.

cally. Please change the source to USB man-

ually.

6

En