Pioneer A-20-K: Contents
Contents: Pioneer A-20-K
Table of contents

A30_SYXE8.book 3 ページ 2012年2月16日 木曜日 午前8時58分
Operating Environment
Thank you for buying this Pioneer
This product is for general household purposes. Any
Operating environment temperature and humidity:
product.
failure due to use for other than household purposes
+5 °C to +35 °C (+41 °F to +95 °F); less than 85 %RH
Please read through these operating instructions so that
(such as long-term use for business purposes in a
you will know how to operate your model properly. After
(cooling vents not blocked)
restaurant or use in a car or ship) and which requires
you have finished reading the instructions, put them in a
Do not install this unit in a poorly ventilated area, or in
repair will be charged for even during the warranty
safe place for future reference.
locations exposed to high humidity or direct sunlight (or
period.
strong artificial light)
K041_A1_En
D3-4-2-1-7c*_A1_En
Contents
If the AC plug of this unit does not match the AC
POWER-CORD CAUTION
Handle the power cord by the plug. Do not pull out the
01 Before you start
outlet you want to use, the plug must be removed
What’s in the box. . . . . . . . . . . . . . . . . . . . . . . . . .4
and appropriate one fitted. Replacement and
plug by tugging the cord and never touch the power
mounting of an AC plug on the power supply cord of
cord when your hands are wet as this could cause a
Loading the batteries in the remote control
(Except A-10) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
this unit should be performed only by qualified
short circuit or electric shock. Do not place the unit, a
Using the remote control. . . . . . . . . . . . . . . . . . . . .4
service personnel. If connected to an AC outlet, the
piece of furniture, etc., on the power cord, or pinch the
Installing the amplifier. . . . . . . . . . . . . . . . . . . . . . 4
cut-off plug can cause severe electrical shock. Make
cord. Never make a knot in the cord or tie it with other
02 Connecting up
sure it is properly disposed of after removal.
cords. The power cords should be routed such that they
Making cable connections. . . . . . . . . . . . . . . . . . .5
The equipment should be disconnected by removing
are not likely to be stepped on. A damaged power cord
About “Bi-wiring” . . . . . . . . . . . . . . . . . . . . . . . . . .5
the mains plug from the wall socket when left unused
can cause a fire or give you an electrical shock. Check
Connecting speaker cables . . . . . . . . . . . . . . . . . .6
for a long period of time (for example, when on
the power cord once in a while. When you find it
Connecting audio cables . . . . . . . . . . . . . . . . . . . .6
vacation).
damaged, ask your nearest PIONEER authorized
Using centralized control with other Pioneer
D3-4-2-2-1a_A1_En
service center or your dealer for a replacement.
components (Except A-10) . . . . . . . . . . . . . . . . . . . 6
S002*_A1_En
Plugging in . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
03 Controls and displays
CAUTION
(A-30 only)
Front panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
The /I STANDBY/ON switch on this unit will not
CAUTION:
Rear panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
completely shut off all power from the AC outlet.
HOT SURFACE. DO NOT TOUCH.
Remote control (Except A-10) . . . . . . . . . . . . . . . .9
Since the power cord serves as the main disconnect
The top surface over the internal
04 Operation
device for the unit, you will need to unplug it from the
heatsink may become hot when
AC outlet to shut down all power. Therefore, make
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
operating this product continuously.
Set the power to Standby. . . . . . . . . . . . . . . . . . . .10
sure the unit has been installed so that the power
When using the unit as a power amplifier
cord can be easily unplugged from the AC outlet in
(A-30 only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
case of an accident. To avoid fire hazard, the power
Making an audio recording . . . . . . . . . . . . . . . . .11
cord should also be unplugged from the AC outlet
To set for automatic standby status
when left unused for a long period of time (for
(Auto Power Down) . . . . . . . . . . . . . . . . . . . . . . .11
Restoring all the settings to the factory default
example, when on vacation).
D3-4-2-2-2a*_A1_En
settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
05 Additional information
Troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . .12
Cleaning the unit . . . . . . . . . . . . . . . . . . . . . . . . .12
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3




