Fagor MV-200: 1. FEATURES AND FUNCTIONS 2. TECHNICAL DATA

11

EN

A.

Vacuum seal button

B.  

Seal button

C.  

"Stop" button

D.  

Vacuum light 

E.  

Sealing light 

F.  

Cover

G.  

Upper closing seal

H.  

Vacuum chamber

I.  

Sealing bar

J.  

Lower closing seal

K.  

Lid opening buttons

L.  

Vacuum nozzle

1. FEATURES AND FUNCTIONS 2. TECHNICAL DATA

Voltage / Frequency: 

220-240V 50Hz

Wattage: 

110W

Max sealing length: 

28cm

Electromagnetic Compatibility

3. GUIDE FOR SAFE OPERATION

The vacuum packer is an electrical device 

and the following safety standards must be 

followed at all times:

•

Before using this appliance for the first 

time, read this instruction manual 

carefully and keep it for future reference. 

Only by doing this can you obtain the 

best results from your iron and ensure its 

safe use. 

•

Before using the appliance, make sure 

that the mains voltage in your home 

corresponds to that indicated on the 

plate on the heater base.

•

In the event of the socket and plug 

being incompatible, have a qualified 

electrician replace the socket.

•

After removing the packaging, check 

that the appliance is in perfect condition. 

If in doubt, contact your nearest 

Technical Assistance centre.

•

The packaging materials (plastic bags, 

polystyrene foam etc.) should be kept 

out of the reach of children, as they 

could constitute a safety hazard.

•

The use of adapters, and/or extension 

leads is not advised. In the event of their 

use being absolutely necessary, always 

ensure that they conform to current 

safety standards, and take care not to 

exceed the indicated maximum voltage.

•

Never use adaptors if the voltage is not 

given on the unit’s underside (technical 

data plate).

•

This appliance is for domestic use only. 

Any other use is considered unsuitable 

and dangerous.

•

The manufacturer accepts no 

responsibility for damage resulting from 

improper use or repairs carried out by 

unqualified personnel.

Certain fundamental rules must be 

respected when using any electric 

appliance, particularly:

•

Keep the appliance away from water or 

other liquids to prevent electrical 

discharge; do not plug the product in if it 

is on a wet surface.

•

Put the appliance on a dry, firm, stable 

surface.

•

Do not place the appliance on or close to 

hot surfaces, in the oven or in a dishwasher.

•

Do not submerge the appliance in water. 

If the cable and plug get wet at any 

moment, unplug the appliance, wearing 

dry rubber gloves. If the unit has been 

submerged in water, sent it immediately 

to the authorised technical repair service 

or your supplier.

•

To avoid burning yourself, never 

touch the sealing bar whilst the unit is 

on.

•

Keep the cable away from hot and 

extremely sharp surfaces.

•

Never pull on the cable to unplug the 

appliance.

•

Always unplug the appliance before 

carrying out any cleaning or maintenance 

operations.

•

In the event of technical failure and/or 

improper working, switch the machine off 

and do not try to repair it. Repairs should 

only be carried out by a Technical 

Assistance Service authorised by the 

manufacturer. Always demand that 

original spare parts are used. Any failure