JVC KD-BT1: Selecting a preset sound mode

Selecting a preset sound mode

: To display the rest

ENGLISH

You can select a preset sound mode suitable to the music genre.

• When appears on the display, you can move back to the previous display by pressing number button 3.

~ Enter setting menu.

Ÿ Select “EQ.”

! Select a sound mode.

FLAT (no sound mode is applied), H.ROCK (Hard Rock), R & B (Rhythm & Blues), POP, JAZZ, DANCE, COUNTRY,

REGGAE, CLASSIC, USER 1, USER 2, USER 3

⁄ Exit from the setting.

The list below shows the preset value setting for each sound mode:

Preset values

Sound modes

Low Mid High

Level FREQ Q Level FREQ Q Level FREQ Q

FLAT 00 60 Hz Q1.25 00 1 kHz Q1.25 00 10 kHz

H.ROCK +03 100 Hz Q1.0 00 1 kHz Q1.25 +02 10 kHz

R & B +03 80 Hz Q1.25 +01 1 kHz Q1.25 +03 15 kHz

POP +02 100 Hz Q1.25 +01 1 kHz Q1.25 +02 10 kHz

JAZZ +03 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz

Fix

DANCE +04 60 Hz Q1.0 –02 1 kHz Q1.0 +01 10 kHz

COUNTRY +02 60 Hz Q1.0 00 1 kHz Q1.0 +02 12.5kHz

REGGAE +03 60 Hz Q1.25 +02 1 kHz Q1.25 +02 12.5kHz

CLASSIC +01 80 Hz Q1.25 00 1 kHz Q1.25 +03 10 kHz

FREQ: Frequency; Q: Band width

Continued on the next page

33SETTINGS

EN24-33_KD-BT1_001A_2.indd 33EN24-33_KD-BT1_001A_2.indd 33 2/12/07 12:10:20 PM2/12/07 12:10:20 PM

• Before making an adjustment, select a

Adjusting the sound

source you want to adjust.

You can adjust the sound characteristics to your

D Loudness, [Off or On]

preference.

Turn the control dial to select “Off” or

• When appears on the display, you can move

“On.” When “On” is selected, low and high

back to the previous display by pressing number

frequencies sound are boosted to produce a

ENGLISH

button 3.

well-balanced sound at low volume level.

1

4 Exit from the setting.

2

Storing your own sound modes

You can adjust the sound modes and store your own

• For “EQ” setting, see the following.

adjustments in memory.

• When appears on the display, you can move

3 Adjust the selected setting item.

back to the previous display by pressing number

A Fad/Bal (Fader/Balance)

button 3.

1 Press number button 1 ( ) to move

to the “Fad/Bal” adjustment display.

1 Follow steps 1 and 2 on the left column.

2 Adjust the speaker output balance by

• In step 2, select “EQ.”

pressing:

5 / ∞: between the front and rear

speakers. [F06 to R06]

2 Select a sound mode.

4/¢ : between the left and

right speakers. [L06 to R06]

B Subwoofer

1 Press number button 1 ( ) to move

To display the rest

to the “Subwoofer” adjustment display.

2 Use 4/¢ to select a cutoff

frequency to the subwoofer.

• 80Hz: Frequencies higher than 80 Hz

are cut off.

3 Select a frequency range.

• 120Hz: Frequencies higher than 120 Hz

are cut off.

• 160Hz: Frequencies higher than 160 Hz

are cut off.

4 Adjust the sound elements of the

3 Turn the control dial to adjust the

selected frequency range.

subwoofer output level. [0 to 8]

1 Use 5 / ∞ to adjust the level.

C VolAdjust, [–5 to +5]

2 Press number button 2 ( ), then turn

Turn the control dial to adjust the input level

the control dial to select the frequency.

of each source (except FM).

3 Press number button 2 ( ), then turn

Adjust to match the input level of the FM

the control dial to select the band width.

sound level.

34

EN34-43_KD-BT1_001A_2.indd 34EN34-43_KD-BT1_001A_2.indd 34 2/7/07 11:35:13 AM2/7/07 11:35:13 AM