Melissa 640-059: REPLACING THE DUSTBAG: ASSEMBLING THE VACUUM CLEANER: REPLACING THE MOTORFILTER REMOVING THE HOSE: REPLACING THE MICROFILTER FLOOR BRUSH USE EXTRA FEATURES INSTRUCTIONS FOR USE MAINTENANCE

JCV-2007_new_IM 22/11/04 14:53 Side 15

- Do not use the appliance on wet

REPLACING THE DUSTBAG:

surfaces.

After removing the tube, open the front

- Do not obstruct the air intake or the air

cover by pressing the lock lever and pulling

outlet vents.

upwards.

- Do not use the appliance to vacuum

Remove the dustbag-holder by pulling the

needles, drawing pins or string.

handle of the holder.

Remove the dustbag from the holder.

ASSEMBLING THE VACUUM CLEANER:

Replace the filter by inserting the carton of

Always remove the plug from the power

the filter into the grooves of the filter-holder.

socket before fitting or removing

REPLACING THE MOTORFILTER

accessories.

Fitting the tube:

- The motorfilter is the filter placed behind

- Press the buttons on the end of the

the dustbag:

tube and insert the tube into the air-

- Open the front cover, and gently pull out

intake.

the filter free of the holders.

- Insert a new motorfilter.

REMOVING THE HOSE:

Remove the plug from the power socket. To

REPLACING THE MICROFILTER

release the hose, press the buttons on the

The microfilter is the filter placed on the

end of the hose and pull the hose firmly from

back of the vacuum cleaner:

the air intake duct.

Press the release-button on the grid and

pull it out at the same time.

FLOOR BRUSH USE

Remove the microfilter and insert a new

- Press the button on the floor brush to

microfilter.

the back position so the brush is shown

Insert the grid back in place.

for cleaning hard floors

EXTRA FEATURES

-Press the button on the floor brush to

the back position for cleaning carpets.

The cleaner has two wheels at the rear and

a multi-directional swivel wheel at the front

INSTRUCTIONS FOR USE

so that it can be moved easily. It also has a

- Before using the appliance, unwind a

convenient carrying handle.

sufficient length of cable and insert the

Before storing your cleaner rewind the

plug into the power socket. A yellow

supply cord. The cleaner may be stored

mark on the power cable shows the

standing on its end, to save space.

ideal cable length. Do not extend the

The vacuum cleaner is fit with a carrying

cable beyond the red mark.

strap, which makes it possible to carry the

vacuum cleaner around while vacuum

-To rewind the power cable, press the

cleaning.

rewind button with one hand, and guide

the cable with the other hand to ensure

MAINTENANCE

that it does not whip causing damage.

Pull out the plug and if necessary clean the

- Press the ON/OFF button to switch the

appliance on the outside with a damp cloth.

appliance on.

Never immerse the appliance into water and

other liquids!

15