JVC KD-DV7308: Selecting a preset sound mode

Storing your own sound

Adjusting the sound

adjustments

1

1

2 Adjust the level.

ENGLISH

2

3 Enter the sound adjustment mode.

1

FAD *

(fader)

R06 to F06

Adjust the front and rear speaker

4 Select a frequency to adjust.

balance.

BAL (balance)

L06 to R06

Adjust the left and right speaker

balance.

LOUD (loudness)

LOUD ON or

5 Adjust the level.

Boost low and high frequencies to

LOUD OFF

produce a well-balanced sound at low

volume level.

2

SUB.W *

(subwoofer)

00 to 08;

Adjust subwoofer output balance.

initial: 04

6 Repeat steps 4 and 5 to adjust the other

3

frequency bands.

VOL.A *

(volume adjust)

–05 to +05;

Adjust and store auto-adjustment

initial: 00

volume level for each source,

7 Store the adjustments in the respective

comparing to the FM volume level.

mode.

VOL (volume)

00 to 30

4

Adjust the volume.

(or 50) *

1

*

If you are using a two-speaker system, set the fader

level to “00.”

2

*

This takes effect only when a subwoofer is connected.

3

*

You cannot make an adjustment for FM. “FIX”

appears.

4

*

Depending on the amplifier gain control setting. (See

page 45 for details.)

42

EN40-47_DV7308_001A_1.indd 42EN40-47_DV7308_001A_1.indd 42 1/18/07 5:14:11 PM1/18/07 5:14:11 PM