Dell Latitude D500: Fan
Fan : Dell Latitude D500
Back to Contents Page
Fan
Dell™Latitude™D500ServiceManual
1. Follow the instructions in "Preparing to Work Inside the Computer."
2. Remove the keyboard.
3. Remove the palm rest.
4. Remove the microprocessor thermal-cooling assembly.
5. Pull straight up on the fan cable connector to disconnect it from the system board connector.
6. Remove the two M2.5 x 8-mm screws from the fan, and pull the fan away from the system board.
Back to Contents Page
CAUTION: Before performing the following procedures, read the safety instructions in your System Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
1
M2.5 x 8-mm screws (2)
2
fan
3
fan cable connector
4
system board connector
Оглавление
- Dell™Latitude™D500ServiceManual
- Before You Begin
- Flashing the BIOS
- Bluetooth™Card
- Microprocessor Module
- Display Assembly and Display Latch
- Docking Doors
- Fan
- Hard Drive
- Keyboard
- Base Latch
- Modem
- Palm Rest
- Pin Assignments for I/O Connectors
- Reserve Battery
- Speakers
- System Board
- System Components
- Microprocessor Thermal-Cooling Assembly
- Memory Module, Mini PCI Card, and Devices