Beurer BY 77: G ENGLISH

Dear customer,

Thank you for choosing one of our products. Our name stands for high-quality, thor-

oughly tested products for applications in the areas of heat, gentle therapy, blood

pressure/diagnosis, weight, massage, beauty, air and babycare. Read these instruc-

tions for use carefully and keep them for later use, be sure to make them accessible

to other users and observe the information they contain.

With kind regards,

Your Beurer team.

1. Getting to know your instrument

Functions of the device

This video baby monitor enables you to see your baby at all times whilst you pursue

activities in other rooms or in the garden. The 23 channels ensure a connection that

is secure and as free of interference as possible.

The device has the following functions:

•

Video monitoring

•

Infrared night vision function

•

ECO+ mode / energy-saving mode

•

Range control with acoustic signal

•

Range of up to 300 m with a clear view

2. Explanation

of symbols

The following symbols appear in these instructions for use:

WARNING

Warning instruction indicating a risk of injury or damage to health

IMPORTANT

Safety note indicating possible damage to the device/accessory

Note

Note on important information

3. Intended use

WARNING

•

Only use the device to monitor your baby when you cannot mind your baby directly.

It is not a substitute for your own personal, responsible supervision!

•

Any improper use can be dangerous.

16

•

The video baby monitor is only intended for domestic/private use, not for com-

mercial use.

4. Notes

WARNING

Safety notes

•

Always position the camera and power cord out of the reach of children. The

power cord may cause strangulation or injury to children.

•

Keep small parts out of reach of children.

•

Keep packaging material away from children (risk of suocation).

•

Never place the camera in the cot or within reach of your child.

•

Place the camera 2 m away from your baby, in order to minimise the possibility of

electrosmog pollution and noise pollution.

•

Make sure that cables are not accessible to your child.

•

Always make sure that the video baby monitor is fully functioning before use and

check that the battery in the parent unit is suciently charged when operating the

device with the battery.

•

Never submerge the camera and the parent unit in water. Never rinse it in running

water.

•

Never use the camera and the parent unit in proximity to moisture.

•

Do not cover the camera and the parent unit with a towel or cover.

•

Only use the mains part plugs included in delivery.

•

Do not use the cable to pull the mains part plug out of the socket.

•

This device may be used by children over the age of eight and by people with reduced

physical, sensory or mental skills or a lack of experience or knowledge, provided

that they are supervised or have been instructed on how to use the device safely

and are fully aware of the consequent risks of use.

•

Children must not play with the device.

•

Cleaning and user maintenance must not be performed by children unless super-

vised.

•

Do not pull, twist or bend the mains cable.

•

Pull the mains part plug out in the case of operational faults, before the cleaning

process, after charging and when the device is not in use.

•

The camera, the parent unit and the mains part plugs should not come into contact

with hot surfaces or sharp-edged objects.

•

Do not use any additional parts that are not recommended by the manufacturer or

oered as accessories.

17

Note

•

Before making a claim, please check the battery in the parent unit and replace it if

necessary.

•

Repairs must only be carried out by Customer Services or authorized suppliers. Un-

der no circumstances should you open or repair the camera or parent unit yourself,

as faultless functionality could no longer be guaranteed thereafter. Failure to comply

will result in voiding of the warranty.

•

If you should have any questions about using the video baby monitor, please contact

either your retailer or Customer Services.

WARNING

Safety notes on handling batteries

•

If a battery has leaked, put on protective gloves and clean the battery compartment

with a dry cloth.

•

If your skin or eyes come into contact with fluid from the battery cell, flush out the

aected areas with plenty of water and seek medical assistance.

•

Risk of explosion! Never throw batteries into a fire.

•

Do not disassemble, split or crush the batteries.

•

Batteries must be charged correctly prior to use. The instructions from the manufac-

turer and the specifications in these instructions for use regarding correct charging

must be observed at all times.

5. Unit description

Camera “Baby”

2

8

1

3

4

PAIR

5

6

7

1. Brightness sensor (night vision function)

5. ON/OFF switch

2. Camera lens 6. Pair button

3. Function light 7. Connection for mains part plug

4. Microphone 8. Temperature sensor

18

Parent unit “Monitor”

1

1. Noise LEDs

2. Lower arrow button / Reduce brightness

3. Right arrow button / Increase volume

4. Intercom function

9

5. OK button

2

6. Menu button

8

7. ON/OFF button

3

8. Left arrow button / Reduce volume

7

4

9. Top arrow button / Increase brightness

6

5

Display description

Signal strength

1

Temperature display

*

1

1

2

Alarm clock

2

*

3

Infrared night light

3

4

Lullaby

5

4

2h

15

Intercom function

1X

5

4h

C

60

2X

6h

F

Alternating camera image mode

Camera number

Battery state

Menu for power-saving mode

Camera menu

Temperature menu

Alarm clock menu

Lullabies menu

Zoom menu

19

6. Initial use

Initial use of camera

1. Place the camera on a level, firm surface and point the camera lens at the area that

you wish to monitor. Ensure that there are no other electrical devices in the proxim-

ity of the camera.

WARNING

Do NOT position the camera within reach of the baby!

2. Connect the small end of the camera mains part plug to the camera.

3. Connect the other end of the mains part plug to the socket.

4.

Move the ON/OFF switch to “ON” to switch on the camera. The function light on the

camera begins to glow blue.

5. Push the ON/OFF switch downwards to switch o the camera.

Initial use of parent unit with battery

1. Remove the assembly clip.

2. Open the cover on the rear of the parent unit by sliding it downwards.

3. Insert the battery included in delivery as shown.

4. Slide the cover on the rear of the parent unit back up again, until you can hear and

feel it slot into place.

5. Attach the assembly clip again.

6.

Press the ON/OFF button to switch on the parent unit. If the camera is already

switched on, the transmission image from the camera will automatically appear on

the screen. If the camera is still switched o, an acoustic signal is emitted and the

following symbol appears on the monitor: “ ”.

Initial use of parent unit with mains part plug

1. Connect the small end of the parent mains part plug with the parent unit.

2. Connect the other end of the mains part plug to the socket.

3.

The parent unit switches on automatically. Press the ON/OFF button to switch o the

unit. If the parent unit and camera are both already switched on, the transmission

image from the camera will automatically appear on the screen of the parent unit.

20

7. Operation

7.1 Infrared night vision

In order to ensure that clear transmission images can be seen on the screen even

when it is dark, the video baby monitor automatically activates the infrared night vi-

sion in the dark. When the infrared night vision is active, a moon symbol ( ) is

shown on the screen.

7.2 Set the volume

The parent unit has 5 volume levels.

To adjust the volume, press the ( ) button or the ( ) button.

7.3 Set the brightness

The parent unit has 5 brightness levels.

To adjust the brightness, press the ( ) button or the ( ) button.

7.4 Intercom function

The parent unit has an intercom function.

To activate the intercom function, hold down the ( ) button on the parent unit and

speak into the unit. The words you have spoken can now be heard on the camera. To

deactivate the intercom function, release the ( ) button again.

7.5 Settings menu

You can adjust the following settings in the menu of the parent unit: zoom function,

lullabies, alarm, temperature unit, add/delete/view camera, alternating camera

image and power-saving mode.

•

To access the settings menu, switch the parent unit on and press the ( ) button.

The following settings menu appears at the bottom of the camera screen:

You can navigate through the menu using the ( ) and ( ) buttons.

Zoom function

The parent unit has a zoom function to increase the size of the transmission image.

To activate the zoom function, proceed as follows:

•

Use the up/down direction arrows ( / ) to select the zoom function you re-

quire (1x or 2x).

•

Confirm using the (

OK

) button.

21

Lullabies

Via the parent unit, you can activate one of fi ve lullabies that will then be played over

the camera. To activate one of the lullabies, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the lullaby of your choice

(1, 2, 3, 4 or 5).

•

Confi rm using the (

OK

) button.

Alarm

You can set an alarm on the parent unit – this will sound on the parent unit after 2, 4

or 6 hours, as you choose. To activate an alarm, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the time period after which

you wish the alarm to sound.

•

Confi rm using the (

OK

) button.

Temperature unit

You can set the device to display the temperature in degrees Celsius (°C) or degrees

Fahrenheit (°F).

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the required unit of tem-

perature.

•

Confi rm using the (

OK

)button.

Add camera

You can connect one parent unit with up to four cameras.

To add a camera to the parent unit, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the menu item .

•

Confi rm using the (

OK

) button. 1,2,3,4 appears on the screen.

•

Use the up/down direction arrows ( / ) to select a number and confi rm with

the (

OK

) button. appears on the screen and the unit searches for a camera.

•

Now hold down the PAIR button on the rear of the camera until an acoustic signal

is heard and the transmission image from the camera that has been added appears

on the screen.

22

Note

•

You can obtain additional cameras from Beurer Customer Services under item no.

163.569.

Delete camera

If you wish to delete the connection to a camera, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the menu item .

•

Confi rm using the (

OK

)button. 1,2,3,4 appears on the screen.

•

Use the up/down direction arrows ( / ) to select the number of the camera

that you wish to delete.

•

Confi rm using the (

OK

) button.

View camera

If you wish to select the transmission image from a camera, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the menu item .

•

Confi rm using the (

OK

)button. 1,2,3,4 appears on the screen.

•

Use the up/down direction arrows ( / ) to select the number of the camera

that you wish to view.

•

Confi rm using the (

OK

)button.

Alternating camera image

If you have multiple cameras registered, the “Alternating camera image” function is

available. When this function is activated, the transmission images from the registered

cameras appear on the screen in the form of a loop that changes every 12 seconds.

To activate this function, proceed as follows:

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the menu item .

•

Confi rm using the (

OK

)button.

Energy-saving mode

The parent unit has a energy-saving mode. When you activate the energy-saving

mode, the screen switches o automatically after 5, 15 or 60 minutes, as you choose.

•

Use the left/right direction arrows ( / ) to select the menu item .

•

Use the up/down direction arrows ( / ) to select the time period after which

the screen should switch o automatically (5 mins, 15 mins or 60 mins).

•

Confi rm using the (

OK

) button.

23

8. Useful information about the baby monitor

•

If you operate the parent unit with the battery, this minimises electrosmog from elec-

trical and magnetic alternating fields.

•

You can increase the range of the baby monitor by positioning the camera as high up

as possible near a door or window and by ensuring that the battery is not too weak.

•

Other radio waves may possibly interfere with the transmission of the baby moni-

tor. Therefore, do not position the baby monitor near devices such as microwaves,

WLAN, etc.

•

The following other factors can interfere with the baby monitor’s transmission or

shorten its range: furniture, walls, houses, trees, environmental factors (such as

fog, rain).

9. Maintenance and cleaning

The service life of the camera and the parent unit depend on careful handling.

IMPORTANT

•

Remove the battery from the parent unit if the video baby monitor is not in use for

an extended period.

•

You will get the maximum capacity from your battery if you run down the battery at

least once every six months. To do this, disconnect the parent unit from the mains

and run the battery down through normal use. Then fully charge the battery up again.

•

The maximum battery capacity can only be reached after it has been charged sev-

eral times and is dependent on many factors (battery state, ambient temperature,

means and frequency of charging, etc.).

•

Protect the camera and the parent unit from knocks, damp, dust, chemicals, drastic

changes in temperature, electromagnetic fields and nearby sources of heat (ovens,

heaters).

•

Clean the camera/parent unit with a soft, dry cloth. Do not use any abrasive clean-

ing products.

24

10. What if there are problems?

“Monitor” parent unit will not

Check whether

switch on.

•

the mains part plug is correctly connected,

•

the battery is correctly inserted,

•

the battery is full, needs charging or is damaged.

An acoustic signal sounds

Check whether

from the “monitor” parent unit.

•

the maximum range has been exceeded,

•

the mains part plug for the camera is correctly con-

nected,

•

the camera is switched on,

•

the parent unit’s battery needs charging.

The parent unit is switched on,

•

To set your desired volume on the parent unit, press

but is not making any noise.

the right or left arrow buttons during operation.

The “monitor” parent unit

•

Recharge the parent unit’s battery,

switches itself o.

•

It could be that the parent unit is in energy-saving

mode. Check whether the power-saving mode has

been selected in the menu and deactivate it where

necessary.

The signal is weak, the con-

•

If another technical device such as a microwave

nection keeps breaking up or

is in the area between the camera and the parent

there is interference.

unit, remove the technical device or switch it o.

•

Check whether other factors, such as trees or any-

thing else, are in the area between the camera and

the parent unit, and change the position of the de-

vices until the parent unit signals a connection.

•

Check whether the camera and parent unit are in-

side the maximum receiving range.

If no transmission is possible,

1. Switch on the camera and parent unit.

you have the option to retune

2. Delete the camera in the menu of the parent unit

the device signals digitally =

and then set up the camera again as described in

pairing.

the “Add camera” section.

25