Ariston CE6VP4: Care and maintenance

Care and maintenance

Switching the appliance off

Cleaning the glass ceramic hob

GB

Disconnect your appliance from the electricity supply

 Do not use abrasive or corrosive detergents (for

before carrying out any work on it.

example, products in spray cans for cleaning barbecues

and ovens), stain removers, anti-rust products, powder

detergents or sponges with abrasive surfaces: these

Cleaning the oven

may scratch the surface beyond repair.

 Never use steam cleaners or pressure cleaners on

It is usually sufficient simply to wash the hob using a

the appliance.

damp sponge

and dry it with absorbent kitchen roll.

 Clean the glass part of the oven door using a

If the hob is particularly dirty, rub it with a special

sponge and a non-abrasive cleaning product, then

glass ceramic cleaning product, then rinse well and

dry thoroughly with a soft cloth. Do not use rough

dry thoroughly.

abrasive material or sharp metal scrapers as these

To remove more stubborn dirt, use a suitable scraper

could scratch the surface and cause the glass to

(this is not supplied with the appliance). Remove

crack.

spills as soon as possible, w

ithout waiting for the

 The stainless steel or enamel-coated external parts

appliance to cool, to avoid residues forming crusty

and the rubber seals may be cleaned using a sponge

deposits. You can obtain excellent results by using a

which has been soaked in lukewarm water and neutral

rustproof steel wire sponge - specifically designed for

soap. Use specialised products for the removal of

glass ceramic surfaces - soaked in soapy water.

stubborn stains. After cleaning, rinse and dry

If plastic or sugary substances have accidentally

thoroughly. Do not use abrasive powders or corrosive

been melted on the hob, remove them immediately

substances.

with the scraper, while the surface is still hot.

 The inside of the oven should ideally be cleaned after

 Once it is clean, the hob may be treated with a special

each use, while it is still lukewarm. Use hot water and

protective maintenance product: the invisible film left

detergent, then rinse well and dry with a soft cloth. Do

by this product protects the surface from drips during

not use abrasive products.

cooking. This maintenance should be carried out

 The accessories can be washed like everyday

while the appliance is warm (not hot) or cold.

crockery, and are even dishwasher safe.

Always remember to rinse the appliance well with

 Dirt and grease should be removed from the control

clean water and dry it thoroughly: residues can

panel using a non-abrasive sponge or a soft cloth.

become encrusted during subsequent cooking



Stainless steel can be marked by hard water that

processes.

has been left on the surface for a long time, or by

Glass ceramic hob

Available from

aggressive detergents that contain phosphorus. We

cleaners

recommend that the steel surfaces are rinsed well

Window scraper Razor blade

DIY Stores

then dried thoroughly.

scrapers

Replacement blades DIY Stores,

Inspecting the oven seals

supermarkets,

Check the door seals around the oven regularly. If the

chemists

seals are damaged, please contact your nearest After-

sales Service Centre. We recommend that the oven is

COLLO luneta

Boots, Co-op stores,

HOB BRITE

department stores, Regional

not used until the seals have been replaced.

Hob Clean

Electricity Company shops,

SWISSCLEANER

supermarkets

Replacing the oven light bulb

1. After disconnecting the oven

Assistance

from the electricity mains,

remove the glass lid covering

 Never use the services of an unauthorised

the lamp socket (see figure).

technician.

2. Unscrew the light bulb and

replace it with a similar one:

Please have the following information to hand:

voltage 230 V, wattage 25 W,

cap E 14.

3. Replace the lid and reconnect

 The type of problem encountered.

the oven to the electricity supply.

 The appliance model (Mod.).

 The serial number (S/N).

The latter two pieces of information can be found on

the data plate located on the appliance.

25