JVC KD-SX947R: SOUND ADJUSTMENTS

SOUND ADJUSTMENTS: JVC KD-SX947R

SOUND ADJUSTMENTS

Selecting preset sound modes

Indication For: Preset values

BAS TRE LOUD

(C-EQ: custom equalizer)

USER (Flat sound) 00 00 OFF

You can select a preset sound mode (C-EQ:

ROCK Rock or +03 +01 ON

ENGLISH

custom equalizer) suitable to the music genre.

disco music

CLASSIC Classical +01 –02 OFF

There is a time limit in doing the following

music

procedure. If the setting is canceled before you

POPS Light music +04 +01 OFF

finish, start from step

1

again.

HIP HOP Funk or rap +02 00 ON

1

Press MODE to enter the functions

music

mode.

JAZZ Jazz music +02 +03 OFF

“MODE” flashes on the upper

part of the display.

Note:

You can adjust each sound mode to your preference.

2

Press EQ (equalizer) while “MODE”

Once you make an adjustment, it is automatically

stored for the currently selected sound mode. See

is still flashing on the display.

“Adjusting the sound” on page 31.

The last selected sound

mode is recalled and applied

to the current source.

Sound mode indicator flashes.

Ex.: If you have selected “USER” previously

3

Select the sound mode you want.

Each time you press the

button, the sound modes

change as follows:

USER

ROCK

CLASSIC

POPSHIP HOPJAZZ

Sound mode indicator flashes.

Ex.: When you select “ROCK”

30

EN30-31_KD-SX947R[EE]f.p65 1/10/03, 9:55 PM30

1

*

When you adjust the bass, treble, or loudness, the

Adjusting the sound

adjustment you have made is stored for the currently

selected sound mode (C-EQ) including “USER.

You can adjust the sound characteristics to your

2

*

If you are using a two-speaker system, set the fader

preference.

level to “00.

3

ENGLISH

*

Normally the control dial works as the volume

1

Select the item you want to adjust.

control. So you do not have to select “VOL” to

Each time you press the

adjust the volume level.

button, the adjustable items

change as follows:

2

Adjust the setting.

BAS

TRE

FAD

BAL

To increase the level or

(bass)

(treble)

(fader)

(balance)

turn on the loudness

VOL

WOOFER

LOUD

(volume)

(subwoofer)

(loudness)

To decrease the level or

turn off the loudness

Indication To do: Range

1

BAS*

Adjust the bass. –06 (min.)

|

+06 (max.)

1

TRE*

Adjust the treble. –06 (min.)

|

Equalization pattern changes

+06 (max.)

as you adjust the bass or treble.

2

FAD*

Adjust the front R06 (Rear only)

Ex. 1: When you adjust “TRE” (treble)

and rear speaker |

balance. F06 (Front only)

BAL Adjust the left L06 (Left only)

and right speaker |

balance. R06 (Right only)

1

LOUD*

Boost low and high

Ex. 2: When you turn on the loudness

frequencies to LOUD ON

produce a well- |

3

Repeat steps

1

and

2

to adjust the

balanced sound LOUD OFF

other items.

at low volume level.

WOOFER Adjust the 0 (min.)

To reset each sound mode to the factory

subwoofer output |

settings, repeat the same procedure and

level. 8 (max.)

reassign the preset values listed in the table on

3

VOL*

Adjust the volume. 00 (min.)

page 30.

|

50 (max.)

31

EN30-31_KD-SX947R[EE]f.p65 1/10/03, 9:55 PM31