JVC KD-SX947R: RDS OPERATIONS

RDS OPERATIONS: JVC KD-SX947R

RDS OPERATIONS

To use Network-Tracking Reception

What you can do with RDS

You can select the different modes of network-

RDS (Radio Data System) allows FM stations to

tracking reception to continue listening to the

send an additional signal along with their regular

same programme in its finest reception.

programme signals. For example, the stations

When shipped from the factory, “AF” is selected.

ENGLISH

send their station names, as well as information

about what type of programme they broadcast,

AF: Network-Tracking Reception is

such as sports or music, etc.

activated with Regionalization set to

Another advantage of RDS function is called

“off.

“Enhanced Other Networks.” By using the

With this setting, the unit switches to

Enhanced Other Networks data sent from a

another station within the same

station, you can tune in to a different station of a

network when the receiving signals

different network broadcasting your favorite

from the current station become

programme or traffic announcement while

weak. (In this mode, the programme

listening to another programme or to another

may differ from the one currently

source such as CD.

received.)

The AF indicator lights up but the

By receiving the RDS data, this unit can do the

REG indicator does not.

following:

Tracing the same programme automatically

AF REG: Network-Tracking Reception is

(Network-Tracking Reception)

activated with Regionalization set to

Standby Reception of TA (Traffic

“on.

Announcement) or your favorite programme

With this setting, the unit switches to

PTY (Programme Type) search

another station, within the same

Programme search

network, broadcasting the same

And some other functions

programme when the receiving

signals from the current station

Tracing the same programme

become weak.

Both the AF indicator and the REG

automatically (Network-Tracking

indicator light up.

Reception)

OFF: Network-Tracking Reception is

When driving in an area where FM reception is

deactivated.

not good, the tuner built in this unit automatically

Neither the AF indicator nor the REG

tunes in to another RDS station, broadcasting

indicator lights up.

the same programme with stronger signals. So,

you can continue to listen to the same

programme in its finest reception, no matter

REG indicatorAF indicator

where you drive. (See the illustration on page

19.)

Two types of the RDS data are used to make

Network-Tracking Reception work correctly—PI

(Programme Identification) and AF (Alternative

Frequency).

Note:

Without receiving these data correctly from the

If a DAB tuner is connected and Alternative Reception

RDS station you are listening to, Network-

(for DAB services) is activated, Network-Tracking

Tracking Reception will not operate.

Reception (“AF”) is also activated automatically. On

the other hand, Network-Tracking Reception cannot

be deactivated without deactivating Alternative

Reception. (See page 46.)

13

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM13

Using TA Standby Reception

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

TA Standby Reception allows the unit to switch

PSM items appears on the display.

temporarily to Traffic Announcement (TA) from

(PSM: see pages 32 and 33.)

the current source (another FM station, CD, or

ENGLISH

other connected components).

TA Standby Reception will not work if you are

listening to an AM station.

2

Select “AF-REG” (alternative

Press TP/PTY to activate TA Standby Reception.

frequency/regionalization reception)

if not shown on the display.

7 When the current source is FM, the TP

indicator either lights up or flashes.

If the TP indicator lights up, TA Standby

Reception is activated.

If a station starts broadcasting a traffic

3

Select the desired mode—“AF,

announcement, “TRAFFIC” appears on the

“AF REG, or “OFF.

display, and this unit automatically tunes in to

the station. The volume changes to the

preset TA volume level (see page 18) and the

traffic announcement can be heard.

If the TP indicator flashes, TA Standby

Reception is not yet activated since the

station being received does not provide the

signals used for TA Standby Reception.

To activate TA Standby Reception, you need

to tune in to another station providing these

4

Finish the setting.

signals.

Press ¢ or 4 to search for such

a station.

When a station providing these signals is

tuned in, the TP indicator stops flashing and

remains lit. Now TA Standby Reception is

activated.

7 When the current source is other than FM,

the TP indicator lights up.

If a station starts broadcasting a traffic

announcement, “TRAFFIC” appears on the

display, and this unit automatically changes the

source and tunes in to the station.

To deactivate the TA Standby Reception,

press TP/PTY again. The TP indicator

disappears.

14

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM14

Using PTY Standby Reception

7 When the current source is FM, the PTY

indicator either lights up or flashes.

PTY Standby Reception allows the unit to switch

If the PTY indicator lights up, PTY Standby

temporarily to your favorite programme (PTY:

Reception is activated.

Programme Type) from the current source

If a station starts broadcasting the selected

(another FM station, CD, or other connected

ENGLISH

PTY programme, this unit automatically

components).

tunes in to the station.

If the PTY indicator flashes, PTY Standby

PTY Standby Reception will not work if you are

Reception is not yet activated since the

listening to an AM station.

station being received does not provide the

signals used for PTY Standby Reception.

You can select your favorite programme type for

To activate PTY Standby Reception, you

PTY Standby Reception.

need to tune in to another station providing

When shipped from the factory, PTY Standby

these signals.

Reception is turned off. (“OFF” is selected for

Press ¢ or 4 to search for such

PTY Standby Reception.)

a station.

When a station providing these signals is

1

Press and hold SEL (select) for more

tuned in, the PTY indicator stops flashing

than 2 seconds so that one of the

and remains lit. Now PTY Standby Reception

PSM items appears on the display.

is activated.

(PSM: see pages 32 and 33.)

7 When the current source is other than FM,

the PTY indicator lights up.

If a station starts broadcasting the selected

PTY programme, this unit automatically

changes the source and tunes in to the station.

2

Select “PTY STBY” (standby) if not

To deactivate the PTY Standby Reception,

shown on the display.

select “OFF” in step

3

on the left column. The

PTY indicator disappears.

3

Select one of the twenty-nine PTY

codes. (See page 19.)

Selected code name

appears on the display

and is stored into

memory.

4

Finish the setting.

15

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM15

Searching your favorite programme

2

Select one of the twenty-nine PTY

codes. (See page 19.)

You can search any one of the PTY codes.

In addition, you can store your 6 favorite

Selected code name

programme types in the number buttons.

appears on the display.

ENGLISH

When shipped from the factory, the following 6

programme types have been stored in the

number buttons (1 to 6).

To store your favorite programme types, see

below.

3

Press and hold the number button

To search your favorite programme type, see

for more than 2 seconds to store the

page 17.

PTY code selected into the preset

number you want.

1

2

3

POP M

ROCK M EASY M

45

6

CLASSICS

AFFAIRS

VARIED

Selected preset number and “MEMO”

(memory) appear alternately.

To store your favorite programme types

4

Press and hold TP/PTY for more than

1

Press and hold TP/PTY for more than

2 seconds to exit from this mode.

2 seconds while listening to an FM

station.

The last selected PTY code appears.

16

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM16

To search your favorite programme type

If there is a station broadcasting a programme

of the same PTY code as you selected, that

1

Press and hold TP/PTY for more than

station is tuned in.

If there is no station broadcasting a programme

2 seconds while listening to an FM

of the same PTY code as you selected, the

station.

ENGLISH

station will not change.

Note:

In some areas, the PTY search will not work correctly.

Other convenient RDS

functions and adjustments

The last selected PTY code appears.

Automatic selection of the station

2

To select one of your favorite

programme type

when using the number buttons

Usually when you press the number button, the

preset station is tuned in.

However, when the preset station is an RDS

station, something different will happen. If the

signals from that preset station are not sufficient

or

for good reception, this unit, using the AF data,

tunes in to another frequency broadcasting the

To select any one of the twenty-nine

same programme as the original preset station is

PTY-codes

broadcasting. (Programme search)

The unit takes some time to tune in to another

station using programme search.

To activate programme search, follow the

procedure below.

See also Changing the general settings

(PSM) on page 32.

Preset number appears only if you select

a PTY code using the number buttons.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

appears on the display.

2 Press ¢ or 4 to select

P(Programme)-SEARCH.

3 Turn the control dial clockwise to select ON.

Ex.: When ROCK M is selected

Now programme search is activated.

4 Press SEL (select) to finish the setting.

3

Press ¢ or 4 to start PTY

search for your favorite programme.

To cancel programme search, repeat the same

procedure and select OFF in step 3 by turning

the control dial counterclockwise.

17

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM17

Changing the display mode while

Setting the TA volume level

listening to an FM station

You can preset the volume level for TA Standby

Reception. When a traffic programme is received,

You can change the initial indication on the

the volume level automatically changes to the

display to station name (PS NAME) or station

ENGLISH

preset level.

frequency (FREQ) while listening to an FM RDS

See also Changing the general settings

station.

(PSM) on page 32.

See also Changing the general settings

(PSM) on page 32.

1 Press and hold SEL (select) for more than 2

seconds so that one of the PSM items

1 Press and hold SEL (select) for more than 2

appears on the display.

seconds so that one of the PSM items

2 Press ¢ or 4 to select TA VOL

appears on the display.

(volume).

2 Press ¢ or 4 to select TU DISP

3 Turn the control dial to set to the desired

(tuner display).

volume.

3 Turn the control dial to set to the desired

You can set it from VOL 00 to VOL 50.

indication (PS NAME or FREQ).

4 Press SEL (select) to finish the setting.

4 Press SEL (select) to finish the setting.

Note:

By pressing DISP (display), you can change the

Automatic clock adjustment

display while listening to an FM RDS station.

When shipped from the factory, the clock built in

Each time you press the button, the following

this unit is set to be readjusted automatically using

information appears on the display:

the CT (Clock Time) data in the RDS signal.

If you do not want to use automatic clock

adjustment, follow the procedure below.

Station name

See also Changing the general settings

(PS NAME)

(PSM) on page 32.

Station frequency

1 Press and hold SEL (select) for more than 2

(FREQ)

seconds so that one of the PSM items

appears on the display.

Programme type

2 Press ¢ or 4 to select AUTO

(PTY)

ADJ (adjustment).

3 Turn the control dial counterclockwise to

select OFF.

Now automatic clock adjustment is canceled.

Then, the display goes back to the original

4 Press SEL (select) to finish the setting.

indication in several seconds.

To reactivate clock adjustment, repeat the same

procedure and select ON in step 3 by turning the

control dial clockwise.

Note:

You must stay tuned to the same station for more than

2 minutes after setting “AUTO ADJ” to “ON.

Otherwise, the clock time will not be adjusted. (This is

because the unit takes up to 2 minutes to capture the

CT data in the RDS signal.)

18

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM18

PTY codes

NEWS: News

CHILDREN: Entertainment programmes for

AFFAIRS: Topical programmes expanding

children

on current news or affairs

SOCIAL: Programmes on social activities

ENGLISH

INFO: Programmes which impart

RELIGION: Programmes dealing with any

advice on a wide variety of

aspect of belief or faith, or the

topics

nature of existence or ethics

SPORT: Sport events

PHONE IN: Programmes where people can

EDUCATE: Educational programmes

express their views either by

DRAMA: Radio plays

phone or in a public forum

CULTURE: Programmes on national or

TRAVEL: Programmes about travel

regional culture

destinations, package tours, and

SCIENCE: Programmes on natural

travel ideas and opportunities

science and technology

LEISURE: Programmes concerned with

VARIED: Other programmes like

recreational activities such as

comedies or ceremonies

gardening, cooking, fishing, etc.

POP M: Pop music

JAZZ: Jazz music

ROCK M: Rock music

COUNTRY: Country music

EASY M: Easy-listening music

NATION M: Current popular music from

LIGHT M: Light music

another nation or region, in that

CLASSICS: Classical music

countrys language

OTHER M: Other music

OLDIES: Classic pop music

WEATHER: Weather information

FOLK M: Folk music

FINANCE: Reports on commerce, trading,

DOCUMENT: Programmes dealing with factual

the Stock Market, etc.

matters, presented in an

investigative style

The same programme can be received on different frequencies.

Programme 1

Programme 1

broadcasting on

broadcasting on

frequency A

frequency E

Programme 1

broadcasting on

frequency B

Programme 1

broadcasting on

Programme 1

frequency C

broadcasting on

frequency D

19

EN13-19_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM19