JVC KD-SX947R: DAB TUNER OPERATIONS
DAB TUNER OPERATIONS: JVC KD-SX947R
DAB TUNER OPERATIONS
ENGLISH
We recommend that you use DAB (Digital Audio
Tuning in to an ensemble and
Broadcasting) tuner KT-DB1500 or KT-DB1000
with your unit.
one of the services
If you have another DAB tuner, consult your JVC
IN-CAR ENTERTAINMENT dealer.
A typical ensemble has 6 or more programmes
• Refer also to the Instructions supplied with
(services) broadcast at the same time. After
your DAB tuner.
tuning in to an ensemble, you can select a
service you want to listen to.
What is DAB system?
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or
DAB is one of the digital radio broadcasting
external component is the current source.
systems available today. It can deliver CD
quality sound without any annoying
1
Select the DAB tuner.
interference and signal distortion.
Furthermore, it can carry text, pictures, and
Each time you press and
data.
hold the button, the DAB
In contrast to FM broadcast, where each
tuner and the FM/AM tuner
programme is transmitted on its own
are alternately selected.
frequency, DAB combines several
FM/AMDAB
programmes (called “services”) to form one
“ensemble.”
In addition, each “service”—called “primary
2
Select the DAB band (DAB1, DAB2,
service”—can also be divided into its
or DAB3).
components (called “secondary service”).
Each time you press the
button, the DAB band
With the DAB tuner connected with this unit,
changes as follows:
you can enjoy these DAB services.
DAB 1
DAB 2
DAB 3
(D1)
(D2)
(D3)
Note:
When reception switches between DAB and FM, the
listening volume level may increase or decrease
Note:
inconveniently. This change in the volume level results
This receiver has three DAB bands (DAB1,
from unequal audio injection levels at broadcaster
DAB2, DAB3). You can use any of them to tune
site, but not from the malfunction of this unit.
in to an ensemble.
To prevent this inconvenience, you can adjust the DAB
input level. (See “To adjust the DAB volume level” on
page 46.)
CONTINUED ON THE NEXT PAGE
43
EN43-46_KD-SX947R[EE]f.p65 1/10/03, 9:54 PM43
To tune in to a particular ensemble without
3
Start searching for an ensemble.
searching
Press ¢ to
Before you start....
search for ensembles
Press FM/AM (DAB) briefly if CD, CD changer, or
of higher frequency.
ENGLISH
external component is the current source.
1 Press and hold FM/AM (DAB) to select DAB
Press 4 to
tuner as the source.
search for ensembles
2 Press FM/AM (DAB) repeatedly to select the
of lower frequency.
DAB band (DAB1, DAB2, or DAB3).
3 Press and hold ¢ or 4 for more
When an ensemble is received, searching
than one second.
stops.
4 Press ¢ or 4 repeatedly until the
To stop searching before an ensemble is
ensemble you want is reached.
received, press the same button you have
• If you hold down the button, the frequency
pressed for searching.
keeps changing until you release the button.
5 Press 5 (up) or ∞ (down) to select a service
4
Select a service (either primary or
(either primary or secondary) you want to
secondary) you want to listen to.
listen to.
To restore the FM/AM tuner
Press 5 (up) to select
the next service. (If a
Press and hold FM/AM (DAB) again.
primary service has
some secondary
services, they are
Storing DAB services in
selected before the
next primary service is
memory
selected.)
You can preset up to 6 DAB services in each
Press ∞ (down) to select the previous
DAB band (DAB1, DAB2, and DAB3) manually.
service (either primary or secondary).
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or
To change the display information while
external component is the current source.
tuning in to an ensemble
1
Select the DAB tuner.
Normally service name is shown on the display.
If you want to check the ensemble name or its
Each time you press and
frequency, press DISP (display).
hold the button, the DAB
Each time you press the button,
tuner and the FM/AM tuner
are alternately selected.
the following information appears
for a while on the display.
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
44
FM/AMDAB
Service name
Ensemble name
Channel number
Frequency
DAB 1
DAB 2
DAB 3
(D1)
(D2)
(D3)
EN43-46_KD-SX947R[EE]f.p65 1/17/03, 12:13 PM44
3
Tune in to an ensemble you want.
Tuning in to a preset DAB
service
You can easily tune in to a preset DAB service.
Remember that you must store services first. If
ENGLISH
you have not stored them yet, “Storing DAB
services in memory” on pages 44 and 45.
4
Select a service of the ensemble you
want to listen to.
Before you start....
Press FM/AM (DAB) briefly if CD, CD changer, or
external component is the current source.
Press 5 (up) to select
the next service.
1
Select the DAB tuner.
Each time you press and
Press ∞ (down) to select
hold the button, the DAB
the previous service.
tuner and the FM/AM tuner
are alternately selected.
5
Press and hold the number button
(in this example, 1) you want to store
FM/AMDAB
the selected service into for more
than 2 seconds.
2
Select the DAB band (DAB1, DAB2,
or DAB3) you want.
Each time you press the
button, the DAB band
changes as follows:
Selected band/preset number and “MEMO”
(memory) appear alternately for a while.
DAB 1
DAB 2
DAB 3
(D1)
(D2)
(D3)
3
Select the number (1 – 6) for the
preset DAB service (primary) you
6
Repeat the above procedure to store
want.
other DAB services into other preset
numbers.
Notes:
• You can only preset primary DAB services. If you
store a secondary service, its primary service will
Note:
be stored instead.
If the selected primary service has some secondary
• A previously preset DAB service is erased when a
services, pressing the same number button repeatedly
new DAB service is stored in the same preset
will tune in to the secondary services.
number.
• Preset DAB services are erased when the power
supply to the memory circuit is interrupted (for
example, during battery replacement). If this
occurs, preset the DAB services again.
45
EN43-46_KD-SX947R[EE]f.p65 1/10/03, 9:54 PM45
To adjust the DAB volume level
What you can do more with
You can adjust the volume level of DAB tuner
DAB
and store it in memory. By adjusting the volume
level properly to match it to the FM sound level,
Tracing the same program automatically
you will not need to adjust the volume level each
ENGLISH
(Alternative Reception)
time you change the source.
You can keep listening to the same program.
When shipped from the factory, DAB volume
• While receiving a DAB service:
level is set at “00.”
When driving in an area where a service
• See also “Changing the general settings
cannot be received, this unit automatically
(PSM)” on page 32.
tunes in to another ensemble or FM RDS
station, broadcasting the same program.
1 Press and hold SEL (select) for more than
• While receiving an FM RDS station:
2 seconds so that one of the PSM items
When driving in an area where a DAB service
appears on the display.
is broadcasting the same program as the
2 Press ¢ or 4 to select “DAB VOL”
FM RDS station is broadcasting, this unit
(volume).
automatically tunes in to the DAB service.
3 Turn the control dial to set to the desired
volume.
You can set it from “VOL–12” to “VOL+12.”
4 Press SEL (select) to finish the setting.
To use Alternative Reception
When shipped from the factory, Alternative
Reception is activated.
• See also “Changing the general settings
(PSM)” on page 32.
1 Press and hold SEL (select) for more than
2 seconds so that one of the PSM items
appears on the display.
2 Press ¢ or 4 to select “DAB AF”
(alternative frequency).
3 Turn the control dial to select the desired
mode.
• AF ON: Traces the program among DAB
services and FM RDS stations
—Alternative Reception. The AF
indicator lights up on the display
(see page 13).
• AF OFF: Alternative Reception is
deactivated.
4 Press SEL (select) to finish the setting.
Note:
When Alternative Reception (for DAB services) is
activated, Network-Tracking Reception (for RDS
stations: see page 13) is also activated automatically.
On the other hand, Network-Tracking Reception
cannot be deactivated without deactivating
Alternative Reception.
46
EN43-46_KD-SX947R[EE]f.p65 1/10/03, 9:54 PM46
Оглавление
- CONTENTS
- LOCATION OF THE BUTTONS
- BASIC OPERATIONS
- RADIO OPERATIONS
- RDS OPERATIONS
- CD OPERATIONS
- MP3 INTRODUCTION
- MP3 OPERATIONS
- SOUND ADJUSTMENTS
- OTHER MAIN FUNCTIONS
- CD CHANGER OPERATIONS
- EXTERNAL COMPONENT OPERATIONS
- DAB TUNER OPERATIONS
- TROUBLESHOOTING
- MAINTENANCE
- SPECIFICATIONS
- СОДЕРЖАНИЕ
- РАСПОЛОЖЕНИЕ КНОПОК
- ОСНОВНЫЕ ОПЕРАЦИИ
- ОПЕРАЦИИ С РАДИОПРИЕМНИКОМ
- ОПЕРАЦИИ С RDS
- ОПЕРАЦИИ С КОМПАКТ-ДИСКАМИ
- ПРЕДИСЛОВИЕ К МР3
- ОПЕРАЦИИ МР3
- НАСТРОЙКА ЗВУКА
- ДРУГИЕ ГЛАВНЫЕ ФУНКЦИИ
- ОПЕРАЦИИ С ВНЕШНИМ КОМПОНЕНТОМ
- ОПЕРАЦИИ С ТЮНЕРОМ DAB
- ВЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
- ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- Please reset your unit