JVC KD-SX947R: RADIO OPERATIONS
RADIO OPERATIONS: JVC KD-SX947R
RADIO OPERATIONS
ENGLISH
Listening to the radio
2
Start searching a station.
To search stations of
You can use either automatic searching or manual
higher frequencies
searching to tune in to a particular station.
Searching a station automatically:
Auto search
To search stations of
lower frequencies
1
Select the band (FM1 – 3, AM).
When a station is received, searching stops.
Each time you press the
button, the band changes as
To stop searching before a station is received,
follows:
press the same button you have pressed for
searching.
FM 1
FM 2
FM 3
A M
(F1)
(F2)
(F3)
Note:
Selected band appears*.
FM1 and FM2: 87.5 MHz – 108.0 MHz
FM3: 65.00 MHz – 74.00 MHz
Lights up when receiving an FM stereo
broadcast with sufficient signal strength.
* When “CLOCK” is set to “ON” (see page 33),
the current indication will soon change to the
clock time.
Note:
This receiver has three FM bands (FM1, FM2,
FM3). You can use any one of them to listen to
an FM broadcast.
9
EN09-12_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM9
Searching a station manually:
When an FM stereo broadcast is hard to
Manual search
receive:
1
Select the band (FM1 – 3, AM).
1 Press MODE to enter the
functions mode while listening to
Each time you press the
ENGLISH
an FM stereo broadcast.
button, the band changes as
“MODE” flashes on the upper part
follows:
of the display.
FM 1
FM 2
FM 3
A M
2 Press MO (monaural), while
(F1)
(F2)
(F3)
“MODE” is still flashing on the
display, so that the MO indicator
Note:
lights up on the display.
This receiver has three FM bands (FM1, FM2,
Each time you press the button,
FM3). You can use any one of them to listen to
the MO indicator lights up and
an FM broadcast.
goes off alternately.
2
Press and hold ¢ or 4
until “MANU” (manual) starts
flashing on the display.
MO (monaural) indicator
When the MO indicator is lit on the display, the
sound you hear becomes monaural but the
reception will be improved.
3
Tune in to a station you want while
“MANU” (manual) is flashing.
To tune in to stations
of higher frequencies
To tune in to stations
of lower frequencies
• If you release your finger from the button,
the manual mode will automatically turns
off after 5 seconds.
• If you hold down the button, the frequency
keeps changing—in 50 kHz intervals
(87.5 MHz — 108.0 MHz for FM 1 and FM
2), in 30 kHz intervals (65.00 MHz — 74.00
MHz for FM 3) and 9 kHz for AM—MW/LW
until you release the button.
10
EN09-12_KD-SX947R[EE]f.p65 1/15/03, 10:59 AM10
Manual preset
Storing stations in memory
You can preset up to 6 stations in each band
You can use one of the following two methods to
(FM1, FM2, FM3, and AM) manually.
store broadcasting stations in memory.
• Automatic preset of FM stations: SSM (Strong-
Ex.: Storing FM station of 88.3 MHz into the
ENGLISH
station Sequential Memory)
preset number 1 of the FM1 band.
• Manual preset of both FM and AM stations
1
Select the band (FM1 – 3, AM) you
FM station automatic preset: SSM
want to store stations into (in this
example, FM1).
You can preset 6 local FM stations in each FM
band (FM1, FM2, and FM3).
Each time you press the
button, the band changes as
1
Select the FM band (FM1 – 3) you
follows:
want to store FM stations into.
FM 1
FM 2
FM 3
A M
Each time you press the
(F1)
(F2)
(F3)
button, the band changes as
follows:
2
Tune in to a station (in this example,
FM 1
FM 2
FM 3
A M
of 88.3 MHz).
(F1)
(F2)
(F3)
To tune in to stations
of higher frequencies
2
Press and hold both buttons for
more than 2 seconds.
To tune in to stations
of lower frequencies
“- -SSM- -” appears, then disappears
when automatic preset is over.
Local FM stations with the strongest signals are
searched and stored automatically in the band
number you have selected (FM1, FM2, or FM3).
These stations are preset in the number buttons
—No.1 (lowest frequency) to No.6 (highest
frequency).
When automatic preset is over, the station stored
in number button 1 will be automatically tuned in.
CONTINUED ON THE NEXT PAGE
11
EN09-12_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM11
3
Press and hold the number button
Tuning in to a preset station
(in this example, 1) for more than 2
seconds.
You can easily tune in to a preset station.
Remember that you must store stations first. If
ENGLISH
you have not stored them yet, see “Storing
stations in memory” on pages 11 and 12.
1
Select the band (FM1 – 3, AM).
Each time you press the
button, the band changes as
follows:
Selected band/preset number
FM 1
FM 2
FM 3
A M
and “MEMO” (memory) appear
(F1)
(F2)
(F3)
alternately for a while.
2
Select the number (1 – 6) for the
preset station you want.
4
Repeat the above procedure to store
other stations into other preset
numbers.
Notes:
• A previously preset station is erased when a new
station is stored in the same preset number.
• Preset stations are erased when the power supply to
the memory circuit is interrupted (for example,
during battery replacement). If this occurs, preset
the stations again.
12
EN09-12_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM12
Оглавление
- CONTENTS
- LOCATION OF THE BUTTONS
- BASIC OPERATIONS
- RADIO OPERATIONS
- RDS OPERATIONS
- CD OPERATIONS
- MP3 INTRODUCTION
- MP3 OPERATIONS
- SOUND ADJUSTMENTS
- OTHER MAIN FUNCTIONS
- CD CHANGER OPERATIONS
- EXTERNAL COMPONENT OPERATIONS
- DAB TUNER OPERATIONS
- TROUBLESHOOTING
- MAINTENANCE
- SPECIFICATIONS
- СОДЕРЖАНИЕ
- РАСПОЛОЖЕНИЕ КНОПОК
- ОСНОВНЫЕ ОПЕРАЦИИ
- ОПЕРАЦИИ С РАДИОПРИЕМНИКОМ
- ОПЕРАЦИИ С RDS
- ОПЕРАЦИИ С КОМПАКТ-ДИСКАМИ
- ПРЕДИСЛОВИЕ К МР3
- ОПЕРАЦИИ МР3
- НАСТРОЙКА ЗВУКА
- ДРУГИЕ ГЛАВНЫЕ ФУНКЦИИ
- ОПЕРАЦИИ С ВНЕШНИМ КОМПОНЕНТОМ
- ОПЕРАЦИИ С ТЮНЕРОМ DAB
- ВЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
- ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- Please reset your unit