JVC KD-SX947R: BASIC OPERATIONS

BASIC OPERATIONS

ENGLISH

1

3

2

Volume level appears.

Turning on the power

1

Turn on the power.

Volume (or audio) level indicator

Note on One-Touch Operation:

(see page 33)

When you select a source in step

2

below, the

4

Adjust the sound as you want. (See

power automatically comes on. You do not have

pages 30 and 31.)

to press this button to turn on the power.

2

Select the source.

To drop the volume in a moment

Press briefly while listening to any

source. “ATT” starts flashing on the display, and

the volume level will drop in a moment.

To resume the previous volume level, press the

button briefly again.

To operate the tuner (FM or AM),

• If you turn the control dial, you can also restore

see pages 9 – 19.

the sound.

To play a CD,

see pages 20 – 23.

To turn off the power

To play an MP3 disc,

Press and hold for more than one

see pages 24 – 29.

second.

To operate the CD changer,

“SEE YOU” appears, then the unit turns off.

see pages 37 – 41.

• If you turn off the power while listening to a

To operate the external component

disc, disc play will start from where playback

(LINE IN or AUX IN), see page 42.

has been stopped previously, next time you

To operate the DAB tuner,

turn on the power.

see pages 43 – 46.

3

Adjust the volume.

CAUTION on Volume Setting:

Discs produce very little noise compared with

To increase the volume

other sources. If the volume level is adjusted for

the tuner, for example, the speakers may be

damaged by the sudden increase in the output

To decrease the volume

level. Therefore, lower the volume before playing a

disc and adjust it as required during playback.

7

EN07-08_KD-SX947R[EE]f.p65 1/10/03, 9:52 PM7

ENGLISH

Setting the clock

4

Set the clock system.

1 Select “24H/12H.”

You can also set the clock system to either 24

2 Select “24H” or “12H.”

hours or 12 hours.

12

1

Press and hold SEL (select) for more

than 2 seconds so that one of the

PSM item appears on the display.

(PSM: see pages 32 and 33.)

5

Finish the setting.

2

Set the hour.

1 Select “CLOCK H” (hour) if not shown on

Note:

the display.

To show the clock time on the display, see page 33.

2 Adjust the hour.

12

To check other information during play, press

DISP (display).

Each time you press the button, the other

information will be shown on the upper part of

3

Set the minute.

the display. (See page 33 for details.)

1 Select “CLOCK M” (minute).

• Pressing DISP (display) with the unit turned off

2 Adjust the minute.

will show the clock time for about 5 seconds.

12

8

EN07-08_KD-SX947R[EE]f.p65 1/10/03, 9:52 PM8