JVC KD-SX947R: CD OPERATIONS
CD OPERATIONS: JVC KD-SX947R
CD OPERATIONS
ENGLISH
Refer to “MP3 OPERATIONS” on pages 26 to 29
The display changes to show the following:
for operating MP3 discs.
Current source
indication*CD–in indicator
Playing a CD
1
Open the control panel.
Total playing time
Total track number
of the inserted disc
of the inserted disc
Notes:
• When an external component is connected to
the AUX input jack on the control panel, be
careful of handling a CD.
Elapsed playing time
Current track
• When a CD is already in the loading slot,
pressing CD CD-CH (AUX) turns on the unit
and starts playback automatically.
2
Insert a CD into the loading slot.
The unit turns on, draws
* When “CLOCK” is set to “ON” (see page 33),
the CD and starts
the current indication will soon change to the
playback automatically.
clock time.
Notes:
• When a CD is inserted upside down, the CD
3
Close the control panel by hand.
automatically ejects (if the control panel is open).
If the control panel is closed, the source changes to
the previously selected source, “PLEASE” and
“EJECT” appear alternately on the display.
• When you open the control panel by pressing 0, the
CD automatically ejects.
• If there is no CD in the loading slot, you cannot
All tracks will be played repeatedly until you
select CD as the source. “NO DISC” appears on
stop playback.
the display.
• If a disc is a CD Text, disc title/performer and then
track title will automatically appear.
20
EN20-23_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM20
To stop play and eject the CD
To go to a particular track directly
Press 0.
Press the number button corresponding to the
CD play stops and the control panel flips down.
track number to start its playback.
The CD automatically ejects from the loading
slot. The source changes to the previously
ENGLISH
selected source.
• If you change the source, CD play also stops
(without ejecting the CD).
Next time you select “CD” as the source, CD
• To select a track number from 1 – 6:
play starts from where playback has been
Press 1 (7) – 6 (12) briefly.
stopped previously.
• To select a track number from 7 – 12:
Press and hold 1 (7) – 6 (12) for more than
Notes:
one second.
• If the ejected disc is not removed for about 15
seconds, the disc is automatically inserted again
To go to a track quickly (+10 and –10 buttons)
into the loading slot to protect it from dust.
1 Press MODE to enter the functions mode
(Disc play will not start this time.)
while playing a CD.
• You can eject the disc even when the unit is turned
“MODE” flashes on the upper
off.
part of the display.
Locating a track or a
2 Press +10 or –10.
particular portion on a CD
To skip 10 tracks* forwards
To fast-forward or reverse the track
to the last track
Press and hold ¢ ,
while playing a CD, to
To skip 10 tracks* backwards
fast-forward the track.
to the first track
* The first time you press +10 or –10 button,
Press and hold 4
,
the track skips to the nearest higher or
while playing a CD, to
lower track with a track number of multiple
reverse the track.
ten (ex. 10th, 20th, 30th).
Then each time you press the button, you can
skip 10 tracks (see “How to use the +10 and –
To go to the next or previous tracks
10 buttons” on page 22).
Press ¢ briefly,
• After the last track, the first track will be
while playing a CD, to go
selected, and vice versa.
ahead to the beginning
of the next track.
Each time you press the
button consecutively, the
beginning of the next
tracks is located and
played back.
Press 4 briefly, while playing a CD, to go
back to the beginning of the current track.
Each time you press the button consecutively,
the beginning of the previous tracks is located
and played back.
CONTINUED ON THE NEXT PAGE
21
EN20-23_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM21
To play back tracks repeatedly
How to use the +10 and –10 buttons
(Track Repeat Play)
• Ex. 1: To select track number 32 while
You can play back the current track repeatedly.
playing track number 6
1 Press MODE to enter the
ENGLISH
functions mode while playing a
CD.
“MODE” flashes on the upper part
of the display.
(Three times)
(Twice)
Track 6 \ 10 \ 20 \ 30 \ 31 \ 32
2 Press RPT (repeat), while “MODE”
is still flashing on the display, so
• Ex. 2: To select track number 8 while playing
that “TRK RPT” appears on the
track number 36
display.
Each time you press the button,
track repeat play mode turns on
and off alternately.
(Three times) (Twice)
Track 36 \ 30 \ 20 \ 10 \ 9 \ 8
Selecting CD playback modes
RPT indicator
To play back tracks at random
When track repeat play is turned on, the RPT
(Disc Random Play)
indicator lights up on the display. The current
track starts playing repeatedly.
You can play back all tracks on the CD at random.
1 Press MODE to enter the
functions mode while playing a
CD.
“MODE” flashes on the upper part
of the display.
2 Press RND (random), while
“MODE” is still flashing on the
display, so that “DISC RND”
appears on the display.
Each time you press the button,
disc random play mode turns on
and off alternately.
(disc) and RND indicators
When disc random play is turned on, the
and RND indicators light up on the display. A
track randomly selected starts playing.
22
EN20-23_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM22
Playing a CD Text
Prohibiting disc ejection
In a CD Text, some information about the disc (its
You can prohibit disc ejection and can lock a disc
disc title, performer, and track title) is recorded.
in the loading slot.
This CD Text information will be shown
ENGLISH
automatically when you play a CD Text.
While pressing CD CD-CH (AUX), press
and hold for more than 2 seconds.
To change the CD Text information
manually, select text display mode while
playing a CD Text.
Each time you press the
“NO EJECT” flashes on the display for about 5
button, the display changes
seconds, and the disc is locked and cannot be
as follows:
ejected.
Disc title / performer
Track title
( lights up on the display)
To cancel the prohibition and unlock the disc
Elapsed playing time and
While pressing CD CD-CH (AUX), press and hold
Current track number
again for more than 2 seconds.
“EJECT OK” flashes on the display for about 5
seconds, and the disc is unlocked.
Notes:
• The display shows up to 8 characters at a time and
scrolls if there are more than 8 characters.
See also “To select the scroll mode—SCROLL” on
page 34.
Some characters or symbols will not be shown (and
will be blanked) on the display.
(Ex. “ABCå!d#” ]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the disc
title/performer and the track title.
23
EN20-23_KD-SX947R[EE]f.p65 1/10/03, 9:51 PM23
Оглавление
- CONTENTS
- LOCATION OF THE BUTTONS
- BASIC OPERATIONS
- RADIO OPERATIONS
- RDS OPERATIONS
- CD OPERATIONS
- MP3 INTRODUCTION
- MP3 OPERATIONS
- SOUND ADJUSTMENTS
- OTHER MAIN FUNCTIONS
- CD CHANGER OPERATIONS
- EXTERNAL COMPONENT OPERATIONS
- DAB TUNER OPERATIONS
- TROUBLESHOOTING
- MAINTENANCE
- SPECIFICATIONS
- СОДЕРЖАНИЕ
- РАСПОЛОЖЕНИЕ КНОПОК
- ОСНОВНЫЕ ОПЕРАЦИИ
- ОПЕРАЦИИ С РАДИОПРИЕМНИКОМ
- ОПЕРАЦИИ С RDS
- ОПЕРАЦИИ С КОМПАКТ-ДИСКАМИ
- ПРЕДИСЛОВИЕ К МР3
- ОПЕРАЦИИ МР3
- НАСТРОЙКА ЗВУКА
- ДРУГИЕ ГЛАВНЫЕ ФУНКЦИИ
- ОПЕРАЦИИ С ВНЕШНИМ КОМПОНЕНТОМ
- ОПЕРАЦИИ С ТЮНЕРОМ DAB
- ВЫЯВЛЕНИЕ НЕИСПРАВНОСТЕЙ
- ТЕХНИЧЕСКОЕ ОБСЛУЖИВАНИЕ
- ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИ
- Please reset your unit