JVC KD-DV7307: Using the Bluetooth ® devices

2 Select a device you want to connect.

5 Use the Bluetooth device to search and

connect.

On the device to be connected, enter the same PIN

code you have just entered for this unit. “CONNECT”

3 Use “OPEN’ or “SEARCH’ to connect.

appears on the display.

ENGLISH

Now connection is established and you can use the

device through the unit.

Connecting/disconnecting a registered device

1 Select “BT-PHONE” or “BT-AUDIO.”

The device remains registered even after you

disconnect the device. Use “CONNECT“ (or activate

“AUTO CNT”) to connect the same device from next

time. (See the following and page 48.)

2 Select a registered device you want to

Searching for available devices

connect/disconnect.

Perform steps 1 and 2 on page 31, then...

1 Select “SEARCH.”

The unit searches and displays the list of the

3 Select “CONNECT” or “DISCNNCT” to connect/

available devices.

disconnect the selected device.

• If no available device is detected, “UNFOUND”

appears.

You can set the unit to connect the Bluetooth device

2 Select a device you want to connect.

automatically when the unit is turned on. (See

“AUTO CNT” on page 48.)

3 Enter the specific PIN code of the device to

the unit.

Deleting a registered device

• Refer to the instructions supplied with the device

1 Select “BT-PHONE” or “BT-AUDIO.”

to check the PIN code.

4 Use the Bluetooth device to connect.

Now connection is established and you can use the

device through the unit.

Connecting a special device

2 Select a registered device you want to delete.

Perform steps 1 and 2 on page 31, then...

1 Select “SPECIAL.”

The unit displays the list of the preset devices.

3 Select “DELETE,” then “YES” to delete the

selected device.

32

EN32-39_DV7308_001A_1.indd 32EN32-39_DV7308_001A_1.indd 32 1/18/07 5:13:42 PM1/18/07 5:13:42 PM

Using the Bluetooth cellular phone

ENGLISH

Change the display information

~ Select “BT-PHONE.”

Ÿ Enter Bluetooth menu.

! Make a call or setting using the Bluetooth setting menu. (See pages 34 and 48.)

When a call comes in....

When an SMS comes in....

The source is automatically changed to “BT-PHONE.”

If the cellular phone is compatible with SMS (Short

Message Service) and “MSG-INFO” (message info) is set

When “AUTO ANS” (answer) is activated....

to “AUTO” (see page 48), the unit rings and “RCV MSG”

The unit answers the incoming calls automatically, see

(receiving message) appears on the display to inform

page 48.

you the arrival of the message.

• When “AUTO ANS” (answer) is deactivated, press any

button (except /control dial) to answer the

incoming call.

To end the call

Hold any button (except /control dial).

• You can adjust the microphone volume level (see

page 48).

33EXTERNAL DEVICES

EN32-39_DV7308_001A_1.indd 33EN32-39_DV7308_001A_1.indd 33 1/18/07 5:13:48 PM1/18/07 5:13:48 PM

Making a call

You can make a call using the following methods.

Select “BT-PHONE,” then follow the following steps to make a call:

ENGLISH

1 2

3 (unless mentioned otherwise)

Call history Display the Dial

Select a call history.

Select a name (if it is acquired) or

Menu.

REDIAL, RECEIVED, MISSED

phone number.

Phone book Select “PH BOOK.”

Select a name from the list.

The list of phone number appears.

Direct dialing Select “NUMBER.” Enter the phone number.

Voice

1 “SAY NAME” appears on the display.

command

2 Speak the name you want to call.

• You can also use voice command from the Dial Menu. Select “VOICE” from the Dial Menu.

• If your cellular phone does not support the voice recognition system, “ERROR” appears on the

display.

Preset phone

See page 35 for settings.

number

34

EN32-39_DV7308_001A_1.indd 34EN32-39_DV7308_001A_1.indd 34 1/18/07 5:13:49 PM1/18/07 5:13:49 PM

Presetting the phone number

You can preset up to six phone numbers.

1 Display the Dial Menu.

ENGLISH

2 Select “PH BOOK,” “MISSED,” “REDIAL,” or “RECEIVED” whichever you want to use.

3 Select a phone number

4

Using the Bluetooth audio player

Enter setting menu

Pause/start play back

(Device list)

Change the display information

Reverse skip/forward skip

~ Select “BT-AUDIO.”

If playback did not start automatically, operate the Bluetooth audio player to start playback.

• Refer also to page 32 for connecting/disconnecting/deleting a registered device.

Bluetooth Information:

If you wish to receive more information about Bluetooth, visit our JVC web site.

35EXTERNAL DEVICES

EN32-39_DV7308_001A_1.indd 35EN32-39_DV7308_001A_1.indd 35 1/18/07 5:13:50 PM1/18/07 5:13:50 PM