Sony STR-SE501: WARNING Precautions

2

GB

WARNING

To prevent fire or shock

hazard, do not expose the

unit to rain or moisture.

To avoid electrical shock,

do not open the cabinet.

Refer servicing to qualified

personnel only.

Do not install the

appliance in a confined

space, such as a bookcase

or built-in cabinet.

Precautions

On safety

Should any solid object or liquid fall into

the cabinet, unplug the receiver and have it

checked by qualified personnel before

operating it any further.

On power sources

• Before operating the receiver, check that

the operating voltage is identical with

your local power supply. The operating

voltage is indicated on the nameplate at

the rear of the receiver.

• The unit is not disconnected from the AC

power source (mains) as long as it is

connected to the wall outlet, even if the

unit itself has been turned off.

• If you are not going to use the receiver

for a long time, be sure to disconnect the

receiver from the wall outlet. To

disconnect the AC power cord, grasp the

plug itself; never pull the cord.

• AC power cord must be changed only at

the qualified service shop.

On placement

• Place the receiver in a location with

adequate ventilation to prevent heat

buildup and prolong the life of the

receiver.

• Do not place the receiver near heat

sources, or in a place subject to direct

sunlight, excessive dust or mechanical

shock.

• Do not place anything on top of the

cabinet that might block the ventilation

holes and cause malfunctions.

On operation

Before connecting other components, be

sure to turn off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with

a soft cloth slightly moistened with a mild

detergent solution. Do not use any type of

abrasive pad, scouring powder or solvent

such as alcohol or benzine.

If you have any question or problem

concerning your receiver, please

consult your nearest Sony dealer.