Sony KDL-40W4710: instruction

Trademark information

NOTICE FOR CUSTOMERS

s is a registered trademark of the DVB Project

s DLNA and DLNA CERTIFIED are trademarks and/or service

IN THE UNITED KINGDOM

marks of Digital Living Network Alliance.

s GUIDE Plus+ is (1) a registered trademark or trademark of, (2)

A moulded plug complying with BS1363 is fitted to this equipment

manufactured under license from and (3) subject of various

for your safety and convenience.

international patents and patent applications owned by, or

licensed to, Gemstar-TV Guide International, Inc. and/or its

Should the fuse in the plug supplied need to be replaced, a 10 AMP

related affiliates.

fuse approved by ASTA or BSI to BS 1362 (i.e., marked with

s GEMSTAR-TV GUIDE INTERNATIONAL, INC. AND/OR

or ) must be used.

ITS RELATED AFFILIATES ARE NOT IN ANY WAY

When an alternative type of plug is used it should be fitted with a 10

LIABLE FOR THE ACCURACY OF THE PROGRAM

AMP FUSE otherwise the circuit should be protected by a 10 AMP

SCHEDULE INFORMATION PROVIDED BY THE GUIDE

FUSE at the distribution board.

PLUS+ SYSTEM. IN NO EVENT SHALL GEMSTAR-TV

If the plug supplied with this equipment has a detachable fuse cover,

GUIDE INTERNATIONAL, INC. AND /OR ITS RELATED

be sure to attach the fuse cover after you change the fuse. Never use

AFFILIATES BE LIABLE FOR ANY AMOUNTS

the plug without the fuse cover. If you should lose the fuse cover,

REPRESENTING LOSS OF PROFITS, LOSS OF BUSINESS,

please contact your nearest Sony service station.

OR INDIRECT, SPECIAL, OR CONSEQUENTIAL

DAMAGES IN CONNECTION WITH THE PROVISION OR

USE OF ANY INFORMATION, EQUIPMENT, OR

SERVICES RELATING TO THE GUIDE PLUS+ SYSTEM.

s Manufactured under license from Dolby Laboratories. Dolby

and the double-D symbol are trademarks of Dolby Laboratories.

s HDMI, the HDMI logo and High-Definition Multimedia

Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

FUSE

s “BRAVIA” and are trademarks of Sony

Corporation.

How to replace the fuse

s “XMB” and “xross media bar” are the trademarks of Sony

Open the fuse compartment with a blade screwdriver, and replace

Corporation and Sony Computer Entertainment Inc.

the fuse.

s The “xx” that appears on the model name, corresponds to two

Please refer to the illustration that actually equipped with the

numeric digits related to design or colour variation.

product.

Introduction

Thank you for choosing this Sony product.

Before operating the TV, please read this manual thoroughly and

retain it for future reference.

The manufacturer of this product is Sony Corporation, 1-7-1

Konan Minato-ku Tokyo, 108-0075 Japan. The Authorized

Representative for EMC and product safety is Sony

Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters please refer to

the addresses given in separate service or guarantee

documents.

Notice for Digital TV function

s Any functions related to Digital TV ( ) will only work in

countries or areas where DVB-T (MPEG2 and MPEG4 AVC)

digital terrestrial signals are broadcast or where you have access

to a compatible DVB-C (MPEG2 and MPEG4 AVC) cable

service. Please confirm with your local dealer if you can receive

a DVB-T signal where you live or ask your cable provider if

their DVB-C cable service is suitable for integrated operation

with this TV.

s The cable provider may charge an additional fee for such a

service and you may be required to agree to their terms and

conditions of business.

s Although this TV set follows DVB-T and DVB-C

specifications, compatibility with future DVB-T digital

terrestrial and DVB-C digital cable broadcasts cannot be

guaranteed.

s Some Digital TV functions may not be available in some

countries/regions and DVB-C cable may not operate correctly

with all providers.

s For more information about DVB-C functionality please see

our cable support site:

http://support.sony-europe.com/TV/DVBC/

2

GB

Table of Contents

Start-up Guide 4

Safety Information ............................................................................................................................ 9

Precautions..................................................................................................................................... 11

Remote and TV Controls/Indicators ............................................................................................. 12

Watching TV

Watching TV.................................................................................................................................... 15

Using GUIDE Plus+™ System and the Digital Electronic Programme Guide (EPG) ..... 17

Using the Digital Favourite List .......................................................................................... 21

Using Optional Equipment

Connecting Chart ........................................................................................................................... 22

Viewing Pictures from Connected Equipment............................................................................. 25

Playing Back Photo/Music via USB .............................................................................................. 26

Using BRAVIA Sync with Control for HDMI ................................................................................. 29

Using Network Features

Connecting the TV to the Network................................................................................................30

Enjoying Photo/Music Files via the Network ............................................................................... 30

Checking the Network Connection............................................................................................... 32

Adjusting the Server Display Settings ......................................................................................... 33

Using MENU Functions

Navigating through TV Home Menu (XMB™)............................................................................... 34

Settings ........................................................................................................................................... 35

Additional Information

GB

Installing the Accessories (Wall-Mount Bracket) ........................................................................ 47

Specifications ................................................................................................................................. 49

Troubleshooting ............................................................................................................................. 51

: for digital channels only

Before operating the TV, please read the “Safety Information” section of this manual.

Retain this manual for future reference.

3

GB

Start-up Guide

Before Use

1: Attaching the stand

To check the accessories

(for KDL-46W47xx/KDL-

Mains lead (Type C) (1)

40W47xx/KDL-46W4500/

KDL-40W4500)

1 Open the carton box and take out the stand

and the screws.

~

• Use this mains lead if you use the set outside the

2 Place the TV set on the stand. Take care

United Kingdom.

not to interfere with cables.

Mains lead (Type BF) (1)

(KDL-52W47xx/KDL-46W47xx/

KDL-40W47xx only)

~

• Use this mains lead if you use the TV in the

United Kingdom.

• See “NOTICE FOR CUSTOMERS IN THE

UNITED KINGDOM” on page 2 when using this

mains lead.

Remote RM-ED011 (1)

3 Fix the TV to the stand according to the

Size AA batteries (R6 type) (2)

arrow marks that guide the screw holes

Stand (1) and screws for stand (4)

using the supplied screws.

(KDL-46W47xx/KDL-40W47xx/

KDL-46W4500/KDL-40W4500 only)

To insert batteries into the remote

Push and lift the cover to open.

~

• If using an electric screwdriver, set the tightening

~

torque at approximately 1.5 N·m {15 kgf·cm}.

• Observe the correct polarity when inserting

batteries.

• Do not use different types of batteries together or

mix old and new batteries.

• Dispose of batteries in an environmentally

friendly way. Certain regions may regulate the

disposal of batteries. Please consult your local

authority.

• Handle the remote with care. Do not drop or step

on it, or spill liquid of any kind onto it.

• Do not place the remote in a location near a heat

source, a place subject to direct sunlight, or a

damp room.

4

GB

2: Connecting an aerial/Set

3: Preventing the TV from

Top Box/recorder (e.g. DVD

toppling over

recorder)

Start-up Guide

Connecting a Set Top Box/recorder (e.g.

DVD recorder) with SCART

A V

2

( SMARTLINK )

Scart lead

Set Top Box/recorder (e.g. DVD recorder)

1 Install a wood screw (4 mm in diameter,

not supplied) in the TV stand.

Connecting a Set Top Box/recorder (e.g.

2 Install a machine screw (M6 x 12, not

DVD recorder) with HDMI

supplied) into the screw hole of the TV.

3 Tie the wood screw and the machine

screw with a strong cord.

4: Bundling the cables

432

1

Set Top Box/recorder (e.g. DVD recorder)

~

• Do not bundle the mains lead together with other

cables.

5

GB

4 Press F/f to select the country in which

5: Performing the initial set-

you will operate the TV, then press .

up

Country

Select country.

2

-

United Kingdom

Ireland

Nederland

België/Belgique

Luxembourg

France

Italia

1

If the country in which you want to use

the TV does not appear in the list, select

“-” instead of a country.

5 Press F/f to select the location type in

which you will operate the TV, then press

.

~

• Select “Home” for the best TV settings to use

the TV in the home.

Location

Select location.

Home

3-11

Shop

6 Select “Yes” then press .

1 Connect the TV to your mains socket

(220-240V AC, 50Hz).

Auto Tuning

2 Press 1 on the TV.

When you switch on the TV for the first

Do you want to start Auto Tuning?

time, the language menu appears on the

screen.

Yes No

3 Press F/f/G/g to select the language

displayed on the menu screens, then press

.

7 Press F/f to select “Antenna” or “Cable”,

Language

then press .

English

Česky

If you select “Cable”, the screen for

Nederlands

Magyar

Français

Русский

selecting the scan type appears. See “To

Italiano

ББлгар

ски

Deutsch

Suomi

tune the TV for Cable connection”

Dansk

Türkçe

Svenska

(page 7).

Español

Norsk

Català

Slovenčina

The TV starts searching for all available

Português

Română

Polski

digital channels, followed by all available

analogue channels. This may take some

time, so do not press any buttons on the

TV or remote while proceeding.

6

GB

If a message appears for you to confirm

To tune the TV for Cable connection

the aerial connection

1 Press .

No digital or analogue channels were

found. Check all the aerial/cable

2 Press F/f to select “Quick Scan” or “Full

connection and then press to start auto-

Scan”, then press .

Start-up Guide

tuning again.

“Quick Scan”: channels are tuned

8 When the “Programme Sorting” menu

according to the cable operator

appears on the screen, follow the steps of

information within the broadcast signal.

“Programme Sorting” (page 42).

Recommended setting for “Frequency”,

“Network ID” and “Symbol Rate” is

If you do not change the order in which

“Auto.”

the analogue channels are stored on the

This option is recommended for fast

TV, press RETURN to go to step 9.

tuning when supported by your cable

9

operator.

Quick Start

If the “Quick Scan” does not tune, please

use the “Full Scan” method below.

“Full Scan”: All available channels are

Do you want to enable Quick Start?

TV turns on more quickly but standby power consumption is increased.

tuned and stored. This procedure may take

some time.

Yes No

This option is recommended when “Quick

Scan” is not supported by your cable

provider.

For further information about supported

For details, see page 37.

cable providers, refer to support web site:

10

http://support.sony-europe.com/TV/

Control for HDMI

DVBC/

3 Press f to select “Start”, then press .

Do you want to enable control for compatible

HDMI devices?

The TV starts searching for channels. Do

Choosing "Yes" will increase

standby power consumption.

not press any buttons on the TV or

Yes No

remote.

~

• Some cable providers do not support “Quick

Scan.” If no channels are detected using “Quick

For details, see page 29.

Scan”, perform “Full Scan.”

Following this step, GUIDE Plus+ setting

screen appears only when GUIDE Plus+

To set-up GUIDE Plus+ system (only

is available.

when GUIDE Plus+ system is

11 Press .

available)*

* Condition you can set-up this feature:

The TV has now tuned in all the available

– in UK, Italy, Germany or Spain.

channels.

– you can receive digital broadcasting.

~

– when “Antenna” is selected in step 7 of “ 5:

• When a digital broadcast channel cannot be

Performing the initial set-up.”

received, or when selecting a country in which

1 Enter postal code of region you live using

there are no digital broadcasts in step 4, the time

F/f/G/g/+.

must be set after performing step 8.

~

• Enter from the left, when the postal code is

fewer than seven digits.

(Continu ed)

7

GB

2 Select language for GUIDE Plus+.

This step will be skipped if any one of the

Adjusting the Viewing

following languages is selected in step 3

Angle of the TV

of “5: Performing the initial set-up”:

This TV can be adjusted within the angles

“English”, “Deutsch”, “Español”,

shown below.

“Italiano”, “Français” or “Nederlands.”

Adjust the angle left and right (swivel)

3 GUIDE Plus+ Data Download.

Top view

The initial download may take some time,

so do not press any buttons on the TV or

20°

20°

remote while proceeding. Once you have

received the first download of TV listings

20°

20°

data, all future downloads will be done

Front

automatically.

~

• When adjusting the angle, hold the Table-Top

Stand with one hand to avoid slipping or tipping

the TV.

Detaching the Table-Top

Stand from the TV

~

• Remove the screws guided by the arrow marks

of the TV.

• Do not remove the Table-Top Stand for any

reason other than listed below.

– To wall-mount the TV.

– To put the TV in the carton at time of purchase

(KDL-46W47xx/KDL-40W47xx/

KDL-46W4500/KDL-40W4500 only).

8

GB

Ventilation

Safety

s Never cover the ventilation holes or insert anything in the

cabinet.

s Leave space around the TV set as shown below.

s It is strongly recommended that you use a Sony wall-mount

Information

bracket in order to provide adequate air-circulation.

Installed on the wall

Installation/Set-up

30 cm

Install and use the TV set in accordance with the instructions below

in order to avoid any risk of fire, electrical shock or damage and/or

injuries.

10 cm

10 cm

Installation

s The TV set should be installed near an easily accessible mains

socket.

s Place the TV set on a stable, level surface.

s Only qualified service personnel should carry out wall

installations.

10 cm

s For safety reasons, it is strongly recommended that you use

Leave at least this space around the set.

Sony accessories, including:

– Wall-Mount Bracket SU-WL500

s Be sure to use the screws supplied with the Wall-mount bracket

Installed with stand

when attaching the mounting hooks to the TV set.

The supplied screws are designed so that they are 8 mm to 12

30 cm

mm in length when measured from the attaching surface of the

mounting hook.

The diameter and length of the screws differ depending on the

10 cm10 cm

6 cm

Wall-mount bracket model.

Use of screws other than those supplied may result in internal

damage to the TV set or cause it to fall, etc.

8mm – 12mm

Leave at least this space around the set.

Screw (supplied with the Wall-

s To ensure proper ventilation and prevent the collection of dirt

mount bracket)

or dust:

Mounting Hook

– Do not lay the TV set flat, install upside down, backwards,

Hook attachment on rear

or sideways.

of TV set

– Do not place the TV set on a shelf, rug, bed or in a closet.

– Do not cover the TV set with a cloth, such as curtains, or

items such as newspapers, etc.

Transporting

– Do not install the TV set as shown below.

s Before transporting the TV set,

disconnect all cables.

Air circulation is

Air circulation is

s Two or three people are needed to

blocked.

blocked.

transport a large TV set.

s When transporting the TV set by

hand, hold it as shown on the right.

Do not put stress on the LCD panel

and the frame around the screen.

s When lifting or moving the TV set,

hold it firmly from the bottom.

Wall

Wall

s When transporting the TV set, do not

subject it to jolts or excessive

vibration.

s When transporting the TV set for

repairs or when moving, pack it

Be sure to hold the

using the original carton and packing

bottom of the panel,

material.

not the front part.

(Continu ed)

9

GB

To access Digital Text

Wide

(Only for the United Kingdom)

Displays wide screen

Many broadcasters provide a Digital Text

(16:9) broadcasts in

service. Digital Text offers graphically rich

the correct

contents, compared to Analogue Text.

proportions.

Select a digital channel which provides Digital

Text, then press /.

Zoom*

When a broadcaster provides a dedicated

Displays

Digital Text channel, select this channel to

cinemascopic (letter

access Digital Text.

box format)

To navigate through Digital Text, follow the

broadcasts in the

instructions on the screen.

correct proportions.

To exit Digital Text, press RETURN.

14:9*

To move around, press F/f/G/g.

To select items, press and the number

Displays 14:9

buttons.

broadcasts in the

To access shortcuts, press the coloured

correct proportions.

buttons.

As a result, black

border areas are

To access Text

visible on the screen.

* Parts of the top and bottom of the picture may be cut off.

Press /. Each time you press /, the display

changes cyclically as follows:

~

Text t Text over the TV picture (mix mode)

• Some characters and/or letters at the top and the

t No Text (exit the Text service)

bottom of the picture may not be visible in Smart

mode. In such a case, you can select “Vertical

To select a page, press the number buttons or

Size” using the “Screen Settings” (page 39) menu

/.

and adjust vertical size to make it visible.

To hold a page, press / .

z

To reveal hidden information, press / .

• When “Auto Format” is set to “On”, the TV will

z

automatically select the best mode to suit the

• When four coloured items appear at the bottom of

broadcast (page 39).

the Text page, Fastext is available. Fastext allows

• You can adjust the position of the picture when

you to access pages quickly and easily. Press the

selecting “Smart”, “14:9” or “Zoom.” Press F/f

corresponding coloured button to access the page.

to move up or down (e.g. to read subtitles).

To change the screen format manually

Using the Options menu

Press repeatedly to select the desired screen

Press OPTIONS to display the following

format.

options when viewing a TV programme.

Smart*

Option Description

Displays conventional

Picture Mode See page 35.

4:3 broadcasts with an

Sound Mode See page 36.

imitation wide screen

Surround See page 36.

effect. The 4:3 picture

is stretched to fill the

Speaker See page 41.

screen.

Motionflow See page 37.

4:3

Subtitle Setting (in

See page 44.

digital mode only)

Displays conventional

4:3 broadcasts (e.g.

Sleep Timer See page 38.

non-wide screen TV)

Power Saving See page 37.

in the correct

System Information

See page 45.

proportions.

(in digital mode only)

16

GB

*

Using GUIDE Plus+™ System

and the Digital Electronic

**

Programme Guide (EPG)

* Condition you can set-up this feature: