Sony KP-44PX2: instruction
Class: Household, kitchen appliances, electronics and equipment
Type:
Manual for Sony KP-44PX2
Table of contents
4-088-416-
12
(1)
R
100 Hz
Projection TV
GB
Instruction Manual
BG
Инструкции за експлоатация
CZ
Návod k obsluze
HU
Kezelési útmutató
PL
Instrukcja obsługi
RU
Инструкция пo эксплyатации
KP-44PX2
©2002 by Sony Corporation
Introduction
Thank you for choosing this Sony 100 Hz Projection TV.
Before operating the projection TV, please read this manual thoroughly and retain it for future reference.
• Symbols used in the manual:
• Important information.
• Shaded buttons on the remote control show you the buttons you have
to press to follow the sequence of the instructions.
• Information on a feature.
•
1,2...
Sequence of instructions.
• Informs you of the result of the instructions.
Table of Contents
Introduction..........................................................................................................................................................................................................3
Safety Information...............................................................................................................................................................................................4
Overview
Overview of Remote Control Buttons ..............................................................................................................................................................5
Overview of TV Buttons ....................................................................................................................................................................................6
Installation
Connecting the Aerial and VCR .......................................................................................................................................................................7
Inserting Batteries into the Remote Control ....................................................................................................................................................7
First Time Operation
GB
Switching On the TV and Automatically Tuning ..........................................................................................................................................8
Adjusting Colour Registration (Convergence)..............................................................................................................................................10
Menu system
Introducing and Using the Menu System......................................................................................................................................................10
On Screen Display Menus Guide ....................................................................................................................................................................11
Menu Guide:
Picture Adjustment........................................................................................................................................................................................12
Sound Adjustment .........................................................................................................................................................................................12
Sleep Timer .....................................................................................................................................................................................................13
Auto Format....................................................................................................................................................................................................13
AV3 Output.....................................................................................................................................................................................................13
PIP Input..........................................................................................................................................................................................................14
PIP Position.....................................................................................................................................................................................................14
Language/Country........................................................................................................................................................................................14
Auto Tuning....................................................................................................................................................................................................14
Programme Sorting........................................................................................................................................................................................15
Programme Labels .........................................................................................................................................................................................15
AV Preset.........................................................................................................................................................................................................15
Manual Programme Preset ...........................................................................................................................................................................16
RGB Centring..................................................................................................................................................................................................17
Teletext
..................................................................................................................................................................................................................... 18
NexTView
................................................................................................................................................................................................................ 19
Additional Information
Connecting Optional Equipment ....................................................................................................................................................................20
Using Optional Equipment ..............................................................................................................................................................................21
SmartLink ...........................................................................................................................................................................................................22
Remote Control Configuration for VCR/DVD.............................................................................................................................................23
Optimum Viewing Area...................................................................................................................................................................................24
Specifications......................................................................................................................................................................................................25
Troubleshooting.................................................................................................................................................................................................26
Table of Contents
3
Safety Information
Never push objects of any kind into the set as
This set is to operate on a 220-240V AC
For environmental and safety reasons, it is
this could result in a fire or electric shock.
supply only. Take care not to connect too
recommended that the TV set is not left in
Never spill liquid of any kind on the set. If
many appliances to the same power socket
standby mode when not in use. Disconnect
any liquid or solid object does fall into the
as this could result in fire or electric shock.
from the mains.
cabinet, do not operate the TV. Have it
checked immediately by qualified personnel.
Do not open the cabinet and the rear cover of
For your own safety, do not touch any part
To prevent fire or shock hazard, do not
the TV. Refer to qualified service personnel
of the TV, power lead or aerial lead during
expose the TV to rain or moisture.
only.
lightning storms.
Never place the TV in hot, humid or
Do not cover the ventilation openings of the
To prevent fire, keep inflammable objects or
excessively dusty places. Do not install the
TV For ventilation, leave a space of at least
naked lights (eg candles) away from the TV.
TV where it may be exposed to mechanical
10cm all around the set.
vibrations.
Clean the screen and cabinet with a soft,
lightly dampened cloth. Do not use any type
Take care not to place heavy objects on the
power lead as this could result in damage.
of abrasive pad, alkaline cleaner, scouring
Pull out the power lead by the plug. Do not
pull on the power lead itself.
We recommend you wind any excess lead
powder or solvent, such as alcohol or
around the holders provided on the rear of
benzine, or antistatic spray. As a safety
the TV.
precaution, unplug the TV before cleaning it.
Unplug the power lead before moving the
Place the TV on a
TV. Avoid uneven surfaces, quick steps or
Do not cover the ventilation openings of the
secure stable stand. Do not allow children to
excessive force. If the set has been dropped
TV with items such as curtains or
climb on to it. Do not place the TV on its side
or damaged, have it checked immediately
newspapers etc.
or face up.
by qualified service personnel.
Additional Safety Information
•After transporting the projection TV directly from a cold to a warm location, or if the room temperature has changed suddenly,
pictures may be blurred or show poor colour over portions of the picture. This is because moisture has condensed on the mirrors
or lenses inside the projection TV. Let the moisture evaporate before using the projection TV.
•To obtain a clear picture, do not expose the screen to direct illumination or direct sunlight. If possible, use spot lighting directed
down from the ceiling.
•Displaying a still picture for long periods of time, for instance, when operating a video game or personal computer and viewing a
programme in 16:9 mode, may damage the picture tube. To avoid this, keep the picture contrast level low.
•Avoid touching the screen, and take care not to scratch the surface with hard objects.
4
Safety Information
Overview of Remote Control Buttons
1
To Temporarily Switch Off TV:
wd
Checking the Accessories Supplied
Press this button to temporarily switch off TV (the standby indicator on the TV lights up). Press
again to switch on TV from standby mode.
To save energy we recommend switching off completely when TV is not in use.
ws
1
After 15 minutes without a signal and without any button being pressed, the TV switches
2
wa
automatically into standby mode.
3
2
VCR or DVD on/off:
Press this button to switch your VCR or DVD on or off.
w;
4
3
Media Selector:
With this remote control you can operate not only this TV but also the main functions of your VCR
or DVD. Switch on the device you want to operate and next press this button repeatedly to select
5
the VCR, TV or DVD. A green light will be momentarily lit to indicate the chosen function.
Before the first time you want to control a DVD or VCR by using this remote control, you have
ql
to set it up depending on the brand of the device to be used. For more details, refer to the
6
chapter “Remote Control Configuration for VCR or DVD” on page 23.
qk
7
4
Selecting input source:
Press this button repeatedly until the desired input symbol of the
qj
8
source appears on the TV screen.
qh
9
5
Selecting channels:
If Media Selector is switched to TV or VCR, press this button to select channels.
0
For double-digit programme numbers, enter the second digit within 2.5 seconds.
qg
qa
6
a) If Media Selector is switched to TV:
Press this button to watch the last channel selected (the last channel watched for at least 5
seconds).
qf
b) If Media Selector is switched to VCR:
qs
For Sony’s VCR double-digit programme numbers, e.g. 23, press -/- - first and then the buttons
2 and 3.
GB
qd
7
Selecting screen format:
Press this button repeatedly to change the format of the screen. For
more details refer to the chapter “Auto Format” on page 13.
8
This button only works in Teletext mode.
9
Selecting Teletext:
Press this button to switch on teletext.
0
Joystick:
a) If Media Selector is switched to TV:
• When MENU is switched on, use these buttons to operate the menu system. For details refer
to “Introducing and Using the Menu System” on page 10.
• When MENU is switched off, press OK to show a channel overview. Then press or to
select the channel and then press again the OK button to watch the selected channel.
b) If Media Selector is switched to VCR or DVD:
Using these buttons you can control the main functions of your VCR or DVD.
qa
Displaying the menu system:
Press this button to display the menu on the TV screen. Press again to remove the menu display
from the TV screen.
qs
Selecting channels:
Press these buttons to select the next or previous broadcast channel.
qd
NexTView:
For more details refer to chapter “NexTView” on page 19.
qf
Adjusting TV volume:
Press these buttons to adjust the volume of the TV.
qg
Recording button:
If Media Selector is switched to VCR, press this button to record programmes.
qh
Selecting TV mode:
Press this button to switch off PIP, teletext or video input.
qj
Selecting Picture mode:
Press this button repeatedly to change the picture mode.
qk
Selecting Sound effect:
Press this button repeatedly to change the sound effect.
ql
Displaying on Screen information:
Press this button to display all on-screen indications. Press again to cancel.
w;
Freezing the picture:
Press this button to freeze the picture. The screen is divided into two screens. On the left with the normal
picture, on the right the picture is freezed. Press this button again to return to the normal picture.
wa
Swapping screens:
Whilst you are in “PIP” mode, press this button to swap the two screens.
ws
PIP (Picture in Picture):
Press this button to watch another source in a small picture (PIP) within the main TV picture. Press again
to cancel. To select the source you want to watch, refer to the chapter “PIP Input” on page 14.
wd
Muting the Sound:
Press this button to mute TV sound. Press again to restore the sound.
Besides TV functions, all coloured buttons as well as green symbols are also used for Teletext operation. For more details,
please refer to the chapter “Teletext” on page 18.
Overview
5
Overview of Projection TV Buttons
Programme Up or
Down Buttons (Select
TV channels)
Press on the
On/Off
mark .
switch
6
Overview
Volume
control buttons
Selecting
Input source
Standby
1
Auto Convergence
indicator
Button:
S video Input jack
Press this button to adjust
the colour registration.
For more details, please
Video Input
refer to the chapter
“Adjusting Colour
Registration
(Convergence)” on page
Audio
10.
Input jacks
or
2
Auto Start Up Button:
Headphones
jack
Press and hold this
button for approximately
2 seconds to start the auto
start up sequence.
For more details, please
refer to the chapter
“Switching On the
Projection TV and
Automatically Tuning”
on page 8.
Connecting the Aerial and VCR
Connecting cables are not supplied.
or
VCR
OUT IN
Scart lead is optional.
GB
For more details of VCR connection, please refer to the section “Additional information
when connecting equipment” on page 21.
Inserting Batteries into the Remote Control
Make sure you insert the supplied batteries using the correct polarities.
Always remember to dispose of used batteries in an environmental friendly way.
Installation
7
Switching On the Projection TV and Automatically Tuning
The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to: 1) choose the language
of the menu screen, 2) choose the country in which you wish to operate the TV, 3) search and store all available channels (TV
Broadcast) and 4) change the order in which the channels (TV Broadcast) appear on the screen.
However, if you need to change any of these settings at a later date, you can do that by selecting the appropriate option in
the (Set Up menu) or by pressing the Auto Start Up Button / on the TV set.
1 Connect the Projection TV plug to the mains socket (220-240V AC, 50Hz)
The first time that the TV set is connected, it is usually turned on. If the TV is off, press
the on/off button on the TV set to turn on the TV.
The first time you switch on the TV, a Language menu displays automatically on the
TV screen.
2 Press the or button on the remote control to select the language, then press the
OK button to confirm your selection. From now on all the menus will appear in the
selected language.
3 The Country menu appears automatically on the TV screen. Press the or button
to select the country in which you will operate the TV set, then press the OK
button to confirm your selection.
• If the country in which you want to use the TV se does not appear in the list,
select “-” instead of a country.
• In order to avoid wrong teletext characters for Cyrillic languages we
recommend to select Russia country in the case that your own country does not
appear in the list.
4 The Auto Tuning menu appears on the screen. Press the OK button to select Yes.
5 The projection TV starts to automatically search and store all available broadcast
channels for you.
This procedure could take some minutes. Please be patient and do not press
any buttons, otherwise automatic tuning will not be completed.
In some countries the TV Broadcaster installs the channels automatically (ACI
system). In this case, the TV Broadcaster sends a menu in which you can select
your city by pressing the or button and OK to store the channels.
If no channels were found during the auto tuning process then a new menu
appears automatically on the screen asking you to connect the aerial. Please
connect the aerial (see page 7) and press OK. The auto tuning process will start
again.
8
First Time Operation
Language
Language
English
Norge
English
Français
Norge
Italiano
Français
Italiano
Nederlans
Nederlans
Select Language: Confirm: OK
Select Language: Confirm: OK
Language
English
Norge
Français
Italiano
Nederlans
Select Language: Confirm: OK
Country
Sverige
Norge
-
Italia
Schweiz/Suisse/Svizzera
Select Language: Confirm: OK
continued...
Do you want to start
automatic tuning?
Yes
No
Auto Tuning
Programme:
1
Channel:
C 01
System
B/G
Searching...
No channel found
Please connect aerial
Confirm
6 After all available channels are captured and stored, the Programme Sorting menu
automatically appears on the screen enabling you to change the order in which the
channels appear on the screen.
a) If you wish to keep the broadcast channels in the tuned order, go to step 7.
b) If you wish to store the channels in a different order:
1 Press the or button to select the programme number with the channel (TV
Broadcast) you wish to rearrange, then press the button.
2 Press the or button to select the new programme number position for your
selected channel (TV Broadcast), then press OK.
3 Repeat steps b)1 and b)2 if you wish to change the order of the other channels.
GB
7 Press the MENU button to remove the menu from the screen.
9
Programme Sorting
Programme:
01 TVE2
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select Channel Confirm:
Programme Sorting
Programme:
01 TVE2 41 TVE
02 TVE
03 ANT3
04 TELE5
05 C+
06 C44
Select new position Move: OK
MENU
Your projection TV is now ready for use.
First Time Operation
Adjusting Colour Registration (Convergence)
Due to the earth’s magnetism, the picture might become undefined and you could see different colours on the outlines of
the images.
In that case, proceed as follows.
Auto converge the Red, Green, and
Blue Lines
1 Press on the mark , on the right side of the projection TV.
2 Press / button.
The Auto Convergence function works for about 10 seconds. When the white
cross disappears from the screen, your projection TV is ready for use.
The Auto Convergence function does not work when:
• no signal is input.
• the input signal is weak.
• the screen is exposed to spotlights or direct sunlight.
• you watch the teletext broadcast.
• you watch NexTView.
Introducing and Using the Menu system
Your projection TV uses an on-screen menu system to guide you through the operations. Use the following buttons on the
Remote Control to operate the menu system:
MENU
1 Press the MENU button to switch the first level menu on.
Picture Adjustment
Picture Adjustment
Picture Mode
Personal
Picture Mode
Contrast
Personal
Contrast
Brightness
Brightness
Colour
Colour
Sharpness
Reset
Sharpness
Noise Reduction
AUTO
Reset
Noise Reduction
AUTO
Select: Enter Menu:
Select: Enter Menu:
2 • To highlight the desired menu or option, press or .
• To enter the selected menu or option, press .
• To return to the last menu or option, press .
• To alter the settings of your selected option, press //or.
• To confirm and store your selection, press OK.
3 Press the MENU button to remove the menu from the screen.
MENU
10
First Time Operation - Menu System
On Screen display Menus Guide
Picture Adjustment
Picture Adjustment
Picture Mode
Personal
Picture Mode
Personal
Contrast
Contrast
Brightness
Brightness
Colour
Colour
Refer to the section "Picture Adjustment”, on page 12.
Sharpness
Sharpness
Reset
Reset
Noise Reduction
AUTO
Noise Reduction
AUTO
Select: Enter Menu:
Select: Enter:
Sound Adjustment
Sound Adjustment
Effect
Natural
Effect
Natural
Treble
Treble
Bass
Bass
Balance
Balance
Reset
Reset
Refer to the section "Sound Adjustment”, on page 12.
Dual Sound
Stereo
Dual Sound
Stereo
Auto Volume
Off
Auto Volume
Off
TV Speakers
On
TV Speakers
On
Select: Enter:
Select: Enter Menu:
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
Refer to the section "Sleep Timer" on page 13.
PIP Input
AV1
PIP Position
PIP Position
Select: Enter:
Select: Enter Menu:
Features
Sleep Timer
Off
Auto Format
On
AV3 Output
AUTO
PIP Input
Refer to the section "Auto Format" on page 13.
AV1
PIP Position
Select: Enter:
Features
Sleep Timer
Off
Auto Format
On
AV3 Output
AUTO
PIP Input
AV1
Refer to the section "AV3 Output" on page 13.
PIP Position
Select: Enter:
GB
Features
Sleep Timer
Off
Auto Format
On
AV3 Output
AUTO
PIP Input
Refer to the section "PIP Input" on page 14.
AV1
PIP Position
Select: Enter:
Features
Sleep Timer
Off
Auto Format
On
AV3 Output
AUTO
PIP Input
AV1
Refer to the section "PIP Position" on page 14.
PIP Position
Select: Enter:
Set Up
Set Up
Set Up
Set Up
Language/Country
Auto Tuning
Auto Tuning
Auto Tuning
Language/Country
Programme Sorting
Programme Sorting
Programme Sorting
Auto Tuning
Programme Labels
Select NexTView
Select NexTView
Programme Sorting
AV Preset
AV Preset
AV Preset
Programme Labels
AV Preset
Refer to the section "Language/Country" on page 14.
Manual Programme Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Refer to the section "Auto Tuning" on page 14.
Manual Programme Preset
Detail Set Up
Select:
Start Auto Tuning:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Refer to the section "Programme Sorting" on page 15.
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
Refer to the section "Programme Labels" on page 15.
AV P r eset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Refer to the section "AV Preset" on page 15.
Programme Labels
AV Preset
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Language/Country
Auto Tuning
Programme Sorting
Programme Labels
AV Preset
Refer to the section "Manual Programme Preset" on page 16.
Manual Programme Preset
Detail Set Up
Select:
Enter:
Set Up
Set Up
Set Up
Detail Set Up
Language/Country
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
Auto Tuning
RGB Centring
0
Programme Labels
Select NexTView
Select NexTView
Programme Sorting
Refer to the section "RGB Centring"
AV Preset
AV Preset
AV Preset
Manual Programme Preset
Manual Set Up
Manual Set Up
Detail Set Up
on page 17.
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
Menu System
11
Menu Guide
Level 1 Level 2 Level 3 / Function
Picture Adjustment
PICTURE ADJUSTMENT
Picture Adjustment
Picture Mode
Personal
Picture Mode
Personal
The “Picture Adjustment” menu allows you to alter the picture
Contrast
Contrast
Brightness
Brightness
Colour
Colour
adjustments.
Sharpness
Sharpness
Reset
Reset
Noise Reduction
AUTO
Noise Reduction
AUTO
To do this: after selecting the item you want to alter press , then
Select: Enter Menu:
Select: Enter:
press repeatedly / / or to adjust it and finally press OK
to store the new adjustment.
• This menu also allows you to customise the picture mode based on the programme you are watching:
Picture Mode Live (for live broadcast programmes, DVD and Digital Set Top Box receivers).
Personal (for individual settings).
Movie (for films).
• Brightness, Colour and Sharpness can only be altered if “Personal” mode is selected.
• Hue is only available for NTSC colour signal (e.g: USA video tapes).
• Select Reset and press OK to reset the picture to the factory preset levels.
• The Noise Reduction option is set to AUTO to automatically reduce the picture noise visible in the broadcast signal. To cancel this function,
select “Off” instead of “AUTO”.
Picture Adjustment
SOUND ADJUSTMENT
Picture Mode
Personal
Contrast
The “Sound Adjustment” menu allows you to alter the sound
Brightness
Colour
adjustments.
Sharpness
Reset
Noise Reduction
AUTO
To do this: after selecting the item you want to alter, press . Then
Select: Enter Menu:
press repeatedly / / or to adjust it and finally press OK
to store the new adjustment.
Sound Adjustment
Sound Adjustment
Effect
Natural
Effect
Natural
Treble
Treble
Bass
Bass
Balance
Balance
Reset
Reset
Dual Sound
Stereo
Dual Sound
Stereo
Auto Volume
Off
Auto Volume
Off
TV Speakers
On
TV Speakers
On
Select: Enter Menu:
Select: Enter:
Effect Natural: Enhances clarity, detail and presence of sound by using “BBE High Definition Sound system”*.
Dynamic: “BBE High Definition Sound system”* intensifies clarity and presence of sound for better
intelligibility and musical realism.
Dolby**V: Dolby Virtual, simulates the sound effect of “Dolby Surround Pro Logic”.
Off: Flat response.
Treble Less More
Bass Less More
Balance Left Right
Reset Resets the sound to the factory preset levels.
K
Dual Sound • For a stereo broadcast:
Mono.
Stereo.
• For a bilingual broadcast:
Mono (for mono channel if available).
A (for channel 1).
B (for channel 2).
Auto Volume Off: volume level changes according to the broadcast signal.
On: volume level of the channels will stay the same, independent of the broadcast signal
(e.g. in the case of advertisements).
TV Speakers On: to listen to the TV from the set speakers.
Off: to listen to the TV from an external amplifier connected to the audio outputs on the rear of the projection
TV set.
• If you are listening to the TV through headphones, the “Effect” option will automatically be switched to “Off”.
• If you select “Dolby Virtual” on the “Effect” option, the “Auto Volume” option will automatically be switched to “Off” and vice versa.
* The “BBE High Definition Sound system” is manufactured by Sony Corporation under license from BBE Sound, Inc. It is covered by
U.S. Patent No. 4,638,258 and No. 4,482,866. The word “BBE” and BBE Symbol are trademarks of BBE Sound, Inc.
** This TV has been designed to create the “Dolby Surround” sound effect by simulating the sound of four speakers with two speakers,
when the broadcast audio signal is Dolby Surround encoded. The sound effect can also be improved by connecting a suitable external
amplifier (for details refer to “Connecting to external audio Equipment” on page 21).
** Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby
Laboratories.
continued...
12
Menu System
Level 1 Level 2 Level 3 / Function
SLEEP TIMER
The “Sleep Timer” option in the “Features” menu allows you to
select a time period for the TV to switch itself automatically into the
standby mode.
To do this: after selecting the option press , then press or to
set the time period delay (max. of 4 hours).
• While watching the TV, you can press the button on the remote control to display the time remaining.
• One minute before the projection TV switches itself into standby mode, the time remaining is displayed on the TV screen automatically.
AUTO FORMAT
The “Auto Format” option in the “Features” menu allows you to
automatically change the aspect ratio of the screen.
To do this: after selecting the option, press . Then press or to
select On (if you wish the TV set to automatically switch the screen
format according to the broadcast signal) or Off (if you wish to keep
your preference). Finally press OK to store.
Even if you have selected “On” or “Off” in the “Auto Format” option, you can always modify the
GB
format of the screen by pressing repeatedly on the remote control to select one of the following
formats:
Smart: Imitation of wide screen effect for 4:3 broadcast.
4:3: Conventional 4:3 picture size, full picture information.
14:9: Compromise between 4:3 and 16:9 picture size.
Zoom: Widescreen format for letterbox movies.
Wide: For 16:9 broadcast. Full picture information.
In “Smart”, “Zoom” and “14:9” modes, parts of the top and bottom of the screen are cut off.
Press or to adjust the position of the image on the screen (e.g. to read subtitles).
AV3 OUTPUT
The “AV3 Output” option in the “Features” menu allows you to
select the source to be output from the Scart connector 3/ 3
so that you can record from this Scart any signal coming from the
projection TV or from an external equipment connected to the Scart
connectors 1/ 1 or 2/ 2 or side connectors 4 or
4 and 4.
If your VCR supports Smartlink, this procedure is not
necessary.
To do this: after selecting the option, press . Then press or to
select the desired output signal: TV, AV1, AV2, AV4, YC4 or
AUTO.
If you select “AUTO”, the output signal will always be the same one that is displayed on the screen.
If you have connected a decoder to the Scart 3/ 3 or to a VCR connected to this Scart, please remember to change back
the “AV3 Output” to “AUTO” or “TV” for correct unscrambling.
Menu System
13
S
Picture Adjustment
Picture Mode
Personal
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
AUTO
Select: Enter Menu:
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
PIP Input
AV1
PIP Position
PIP Position
Select: Enter Menu:
Select: Enter:
Picture Adjustment
Picture Mode
Personal
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
AUTO
Select: Enter Menu:
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
PIP Input
AV1
PIP Position
PIP Position
Select: Enter Menu:
Select: Enter:
Smart
4:3
14:9
Zoom
Wide
Picture Adjustment
Picture Mode
Personal
Contrast
Brightness
Colour
Sharpness
Reset
Noise Reduction
AUTO
Select: Enter Menu:
S
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
PIP Input
AV1
PIP Position
PIP Position
Select: Enter Menu:
Select: Enter:
S
continued...
Level 1 Level 2 Level 3 / Function
Picture Adjustment
PIP INPUT
Picture Mode
Personal
Contrast
The “PIP Input” option in the “Features” menu allows you to select
Brightness
Colour
Sharpness
the source you want to watch in the “PIP” screen.
Reset
Noise Reduction
AUTO
To do this: after selecting the option, press . Then press
Select: Enter Menu:
repeatedly or to select the desired source AV1, AV2, AV3,
AV4 or TV. Finally press OK to store.
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
PIP Input
AV1
PIP Position
PIP Position
Select: Enter Menu:
Select: Enter:
To watch the “PIP” screen with the selected source, press the
B
/ button on the remote control.
A
You can swap the screens by pressing the / button on the
B
A
remote control.
A
BB
Picture Adjustment
PIP POSITION
Picture Mode
Personal
Contrast
The “PIP Position” option in the “Features” menu allows you to
Brightness
Colour
change the position of the “PIP” screen within the main screen.
Sharpness
Reset
Noise Reduction
AUTO
To do this: after selecting the option press , , or to select
Select: Enter Menu:
the desired position. Finally press OK to store.
Features
Features
Sleep Timer
Off
Sleep Timer
Off
Auto Format
On
Auto Format
On
AV3 Output
AUTO
AV3 Output
AUTO
PIP Input
AV1
PIP Input
AV1
PIP Position
PIP Position
Select: Enter Menu:
Select: Enter:
Picture Adjustment
LANGUAGE/COUNTRY
Picture Mode
Personal
Contrast
The “Language/Country” option in the “Set Up” menu allows you
Brightness
Colour
to select the language that the menus are displayed in. It also allows
Sharpness
Reset
you to select the country in which you wish to operate the projection
Noise Reduction
AUTO
TV set.
Select: Enter Menu:
To do this: after selecting the option, press and then proceed in
the same way as in steps 2 and 3 of the section “Switching On the
Set Up
Set Up
Set Up
Set Up
Language/Country
Auto Tuning
Auto Tuning
Language/Country
Projection TV and Automatically Tuning” on page 8.
Auto Tuning
Programme Sorting
Programme Sorting
Auto Tuning
Programme Sorting
Select NexTView
Programme Sorting
Programme Labels
Select NexTView
AV Preset
AV Preset
AV Preset
Programme Labels
AV Preset
Manual Programme Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
Picture Adjustment
AUTO TUNING
Picture Mode
Personal
Contrast
The “Auto Tuning” option in the “Set Up” menu allows you to
Brightness
Colour
automatically search for and store all available TV channels.
Sharpness
Reset
Noise Reduction
AUTO
To do this: after selecting the option, press and then proceed in
Select: Enter Menu:
the same way as in the steps 4 and 5 of the section “Switching On the
Projection TV and Automatically Tuning” on page 8.
Set Up
Set Up
Set Up
Set Up
Auto Tuning
Language/Country
Language/Country
Auto Tuning
Auto Tuning
Auto Tuning
Programme Sorting
Programme Sorting
Programme Sorting
Programme Sorting
Select NexTView
Select NexTView
AV Preset
Programme Labels
Programme Labels
AV Preset
AV Preset
AV Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Start Auto Tuning:
continued...
14
Menu System
Level 1 Level 2 Level 3 / Function
Picture Adjustment
PROGRAMME SORTING
Picture Mode
Personal
Contrast
The “Programme Sorting” option in the “Set Up” menu allows you
Brightness
Colour
to change the order in which the channels (TV Broadcast) appear on
Sharpness
Reset
Noise Reduction
AUTO
the screen.
Select: Enter Menu:
To do this: after selecting the option, press and then proceed in
the same way as in step 6 b) of the section “Switching On the
Set Up
Set Up
Set Up
Set Up
Projection TV and Automatically Tuning” on page 9.
Language/Country
Auto Tuning
Auto Tuning
Language/Country
Auto Tuning
Programme Sorting
Programme Sorting
Programme Sorting
Auto Tuning
Programme Sorting
Programme Labels
Select NexTView
Select NexTView
AV Preset
AV Preset
AV Preset
Programme Labels
AV Preset
Manual Programme Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
Picture Adjustment
PROGRAMME LABELS
Picture Mode
Personal
Contrast
The “Programme Labels” option in the “Set Up” menu allows you
Brightness
Colour
to name a channel using up to five characters (letters or numbers).
Sharpness
Reset
Noise Reduction
AUTO
To do this:
Select: Enter Menu:
1 After selecting the option, press , then press or to select
the programme number with the channel you wish to name.
Set Up
Set Up
Set Up
Set Up
Auto Tuning
Language/Country
Auto Tuning
Language/Country
Auto Tuning
Programme Sorting
Auto Tuning
2 Press . With the first element of the Label column highlighted,
Programme Sorting
Programme Sorting
Select NexTView
Select NexTView
Programme Sorting
Programme Labels
AV Preset
AV Preset
Programme Labels
AV Preset
AV Preset
press or to select a letter or number (select “-“ for a blank),
Manual Set Up
Manual Set Up
Manual Programme Preset
Manual Programme Preset
Detail Set Up
Detail Set Up
then press to confirm this character. Select the other four
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
characters in the same way. Finally press OK to store.
GB
Picture Adjustment
Picture Mode
Personal
AV PRESET
Contrast
Brightness
The “AV Preset” option in the “Set Up” menu allows you to
Colour
Sharpness
designate a name to the external equipment you have connected to
Reset
Noise Reduction
AUTO
the input sockets of this projection TV.
Select: Enter Menu:
To do this:
1 After selecting the option, press , then press or to select
Set Up
Set Up
Set Up
Set Up
Language/Country
Auto Tuning
Auto Tuning
Language/Country
the input source you wish to name (AV1, AV2 and AV3 are for
Auto Tuning
Programme Sorting
Programme Sorting
Programme Sorting
Auto Tuning
Programme Labels
Select NexTView
Select NexTView
Programme Sorting
Programme Labels
the rear Scarts and AV4 for side connectors). Then press .
AV Preset
AV Preset
AV Preset
AV Preset
Manual Programme Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
2 A label automatically appears in the label column:
a) If you want to use one of the 6 predefined label (CABLE,
GAME, CAM, DVD, VIDEO or SAT), press or to select
the desired label and finally press OK to store.
b) If you want to set a different label, select Edit and press .
Then with the first element highlighted, press or to
select a letter, number or “-“ for a blank, then press to
confirm this character. Select the other four characters in the
same way and finally press OK to store.
b) If you want to set a different label, select Edit and press .
Then with the first element highlighted, press or to
select a letter, number or “-“ for a blank, then press to
confirm this character. Select the other four characters in the
same way and finally press OK to store.
continued...
Menu System
15
Level 1 Level 2 Level 3 / Function
Picture Adjustment
MANUAL PROGRAMME PRESET
Picture Mode
Personal
Contrast
The “Manual Programme Preset” option in the “Set Up” menu
Brightness
Colour
allows you to:
Sharpness
Reset
Noise Reduction
AUTO
Select: Enter Menu:
Set Up
Set Up
Set Up
Set Up
Language/Country
Auto Tuning
Auto Tuning
Language/Country
Auto Tuning
Programme Sorting
Programme Sorting
Programme Sorting
Auto Tuning
Programme Labels
Select NexTView
Select NexTView
Programme Sorting
AV Preset
AV Preset
AV Preset
Programme Labels
AV Preset
Manual Programme Preset
Manual Set Up
Manual Set Up
Manual Programme Preset
Detail Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
a) Preset channels or the VCR channel one by one to the programme order of your choice. To do this:
1 After selecting the ”Manual Programme Preset” option, press then with Programme option highlighted press .
Press or to select which programme number you want to preset the channel on (for VCR, select programme number
“0”). Then press .
2 The following option is only available depending on the country you have selected in the “Language/Country” menu.
After selecting the System option, press . Then press or to select the TV Broadcast system (B/G for western
European countries, D/K for eastern European countries, L for France or I for United Kingdom). Then press .
3 After selecting the Channel option, press . Then press the number buttons to enter directly the channel number of the
TV Broadcast or the channel of the VCR signal. If you do not know the channel number, press or to search for it. When
you tune the desired channel, press OK twice to store.
Repeat all the above steps to tune and store more channels.
b) Label a channel using up to five characters.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number with the channel
you wish to name. When the programme you want to name appears on the screen, select the Label option and press . Next
press or to select a letter, number or “-“ for a blank. Press to confirm this character. Select the other four characters in
the same way. After selecting all the characters, press OK twice to store.
c) Fine tune the broadcast reception. Normally the automatic fine tuning (AFT) will give the best possible picture, however you
can manually fine tune the TV to obtain a better picture reception in case the picture is distorted.
To do this: while watching the channel (TV Broadcast) you wish to fine tune, select the AFT option and press . Next press
or to adjust the fine tuning between -15 and +15. Finally press OK twice to store.
d) Skip any unwanted programme numbers when they are selected with the PROG +/- buttons.
To do this: highlighting the Programme option, press the PROG +/- button to select the programme number you want to skip.
When the programme you want to skip appears on the screen, select the Skip option and press . Next press or to select
Yes. Finally press OK twice to confirm and store.
To cancel this function afterwards, select “No” instead of “Yes” in the step above.
e) View and record scrambled channels when using a decoder connected to Scart 3/ 3 directly or through a VCR.
S
This option is only available depending on the country you have selected in the “Language/Country” menu.
To do this: select the Decoder option and press . Next press or to select On. Finally press OK twice to confirm and
store.
To cancel this function afterwards, select “Off” instead of “On” in the step above.
continued...
16
Menu System
Level 1 Level 2 Level 3 / Function
Picture Adjustment
RGB CENTRING
Picture Mode
Personal
Contrast
When connecting an RGB source, such as a “PlayStation”, you may
Brightness
Colour
Sharpness
need to readjust the horizontal position of the picture. If this is the
Reset
Noise Reduction
AUTO
case, you can adjust it through the “RGB Centring” option in the
Select: Enter Menu:
“Detail Set Up”.
To do this: while watching an RGB source select the “RGB Centring”
Set Up
Set Up
Set Up
Detail Set Up
Language/Country
Auto Tuning
Auto Tuning
option and press . Then press or to adjust the centre of the
Programme Sorting
Auto Tuning
Programme Sorting
RGB Centring
0
Select NexTView
Programme Sorting
AV Preset
Programme Labels
Select NexTView
picture between –10 and +10. Finally press OK to confirm and store.
AV Preset
AV Preset
Manual Set Up
Manual Programme Preset
Manual Set Up
Detail Set Up
Select:
Select:
Select:
Enter Menu:
Enter Menu:
Enter Menu:
Select:
Enter:
GB
Menu System
17
Teletext
Teletext is an information service transmitted by most TV stations. The index page of the teletext service (usually page 100)
gives you information on how to use the service. To operate teletext, use the remote control buttons as indicated below.
• Teletext errors may occur if you use a channel (TV Broadcast) with a weak signal.
• After 5 minutes viewing the same teletext page and without any button being pressed, the brightness level of the picture
automatically decreases notoriously to avoid any damage to the picture tube. Press any button of the remote control to
reset the brightness level.
To switch on Teletext :
After selecting the TV channel which carries the teletext service you
wish to view, press .
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
TELETEXT
Index
Index
Index
Index
Index
Index
Index
Index
Programme
Programme
Programme
Programme
Programme
Programme
Programme
Programme
25
25
25
25
25
25
25
25
News
News
News
News
News
News
News
News
153
153
153
153
153
153
153
153
To select a Teletext page:
Sport
Sport
Sport
Sport
Sport
Sport
Sport
Sport
101
101
101
101
101
101
101
101
Weather
Weather
Weather
Weather
Weather
Weather
Weather
Weather
98
98
98
98
98
98
98
98
Input 3 digits for the page number, using the numbered buttons.
• If you make a mistake, retype the correct page number.
• If the counter on the screen continues searching, it is because the page is not available.
If this is the case, input another page number
To access the next or preceding page:
Press PROG + ( ) or PROG - ().
To superimpose teletext on to the TV:
Whilst you are viewing teletext, press . Press it again to cancel teletext mode.
To freeze a teletext page:
Press / . Press it again to cancel the freeze.
To reveal concealed information (e.g: answer to a quiz):
Press / . Press it again to conceal the information.
To select a sub page:
A teletext page may consist of several sub pages. In this case the page number that appears on the
upper left corner will change from white to green and one or more arrows will appear next to the page
number. Repeatedly press the or buttons on the remote control to watch the desired sub page.
To Switch Off Teletext:
Press .
Fastext
Fastext service lets you access Teletext pages with one button push.
When you are in Teletext mode and Fastext is broadcast, a colour coded menu appears at the bottom
of the teletext page. Press the appropriate coloured button (red, green, yellow or blue) to access
the page corresponding to your menu choice.
18
Teletext
NexTView*
*(depending on availability of service).
NexTView is an on-screen electronic programme guide, providing you with programme information for different
broadcasters.
When looking for information you can search by theme (sports, art, etc...) or date.
If wrong characters appear when viewing NexTView, use the menu system to enter the “Language/Country” menu (see page
14) and select the same language as the NexTView is broadcasted.
Displaying NexTView
1 Select a broadcast channel providing a NexTView service. In this case the indication “NexTView” is displayed as soon as data
is available.
2 To see NexTView service you have two different types of NexTView interface. These depend on the % of available data:
a)
“Programme List” interface:
Whilst you are watching TV, and after the indication “NexTView” (coloured white) is displayed on the screen, press the
button on the remote control to watch the “Programme List” interface (see fig. 1).
b) “Overview” interface:
Whilst you are watching TV, and after more than 50% of NexTView data is available (100% data may not be available
depending on the area) the indication “NexTView” (coloured black) is displayed on the screen. Press the button on
the remote control to watch the “Overview” interface (see fig. 2).
As soon as you enter the NexTView service the % of NexTView data available will be shown in the bottom left corner of
the screen. Once you have entered the service, the % of data will not increase.
3 To navigate through NexTView:
• moving to right or left press or .
• moving up or downwards, press or .
• confirming a selection, press OK.
GB
4 To switch NexTView off, press the button on the remote control.
“Programme List” interface (fig. 1): “Overview” interface (fig. 2):
1
1
01
02
03
04
05
06
07
01
02
03
04
05
06
07
Mon
Tue
Wed
Thu
Fri
Sat
Sun 7 : 07 : 01
Mon
Tue
Wed
Thu
Fri
Sat
Sun 9 : 15 : 03
9 : 00 9 : 30 10 : 00
2
TV1
00 : 30
Songs from the shows
2
TV1
Magazine
|
Songs from the shows
TV2
01 : 30
Weather forecast informat i
TV2
Weather Forecast
|
Mike's show
TV3
05 : 30
A1 news magazine
TV3
Euronews
|
Fantasy film
|
Star Wars
TV4
06 : 30
Arts show
TV4
Home Shopping Europe
|
Euro Sports
TV5
07 : 30
Oclock news
TV5
News | Arts show
|
Magazine
TV6
08 : 30
Weather forecast informat i
TV6
Larry King's live |
Euro Sports
3
TV7
09 : 30
A1 news magazine
TV7
Euro magazine |
Euro Sports
TV8
10 : 30
Arts show
3
TV8
Home Shopping Europe |
Euronews
Songs from the shows
Songs from the shows
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
TV1 00:30 - 01:30 Thursday 04
Programme descriptio n
Record Remind
Record Remind
4
5
4
5
1 Icons for different themes (see the “Icons’ key” below) 4 Record*
This function only works if you have connected a VCR which
2 Date
supports SmartLink and Timer Programming feature.
If you wish to record the selected programme, press the red button
3 Programme list
on the remote control.
5 Remind*
If you wish to be reminded when the selected programme is broadcast, press
the green button on the remote control. At the time that programme should
be broadcast a reminder message is displayed on the TV.
* “Record” and “Remind” options will be shown on the screen as soon as a programme have been selected, but they will not be shown if
you are watching the NexTView service on a TV channel which is not a NexTView provider.
* “Record” and “Remind” will not be available if the programme that you have selected has already started.
Icons’ key:
full selection list:
music
All the programme information is listed by time and
channel selection:
broadcast channels order.
If the NexTView provider sends information of more than 8
broadcast channels, you can select 8 of them to create your
entertainment
personal list.
children
After you have created your personal list, the default list can
be restored. To restore it, select “Auto (” by pressing
arts
button on the remote control.
sports
remind list:
Shows you the list with all the programmes (maximum 5
news
programmes) that you have selected to be reminded about.
movies
NexTView
19
Connecting Optional Equipment
Using the following instructions, you can connect a wide range of optional equipment to your projection TV.
S VHS/Hi8
DVC
camcorder
D
VCR
VCR
8mm/Hi8/
DVC
C
camcorder
Decoder
E
A
B
F
DVD
G
Hi-fi
VCR
H
Acceptable input signal
Available output signal
A No inputs
Audio signal.
B Audio/video and RGB signal
Video/audio from TV tuner.
C Audio/video and RGB signal
Video/audio displayed on TV screen (monitor out).
D Audio/video and S video signal
Video/audio from selected source.
E S Video signal
No output.
F Video signal
No output.
G Audio signal
No output.
H No input
Audio signal to headphones.
20
Additional Information
To avoid
picture
distortion:
Do not
connect
equipment
to E and F
connectors
at the same
time.
continued...
Additional Information when connecting equipment
Connecting a VCR
We recommend you connect your VCR to the D socket using a scart lead. If you do not have a scart lead, use the “Manual
Programme Preset” section on page 16 to tune in the channel of the VCR test signal to TV programme number “0”. Also refer to
your VCR instruction manual to get the VCR test signal.
If your video supports SmartLink please refer to the "SmartLink" section of this instruction manual on page 22.
If you have connected a decoder to the Scart 3/ 3 D or through a VCR connected to this Scart:
S
Select the “Manual Programme Preset” option in the “Set Up” menu and after entering in the “Decoder**” option, select “On” (by
using or ). Repeat this option for each scrambled signal.
**This option is only available depending on the country you have selected in the “Language/Country” menu.
Connecting to external Audio Equipment:
Plug in your Hi-Fi equipment to the audio output sockets A if you wish to amplify the audio output from projection TV. Next ,
using the menu system, select the “Sound Adjustment” menu and set the “TV Speakers” to “Off”.
Audio level of the external speakers can be modified by pressing the volume buttons on the remote control. Also treble and
bass settings can be modified through the “Sound Adjustment” menu.
To enjoy “Dolby Virtual” sound effect through your Hi-Fi equipment:
Place the speakers of your equipment in front of your listening position and beside the
projection TV set but keeping a distance of 50 cm between each speaker and the
projection TV set.
Then by using the menu system, select the menu “Sound Adjustment”. Next select
“Dolby V” on the “Effect” option.
~50°
GB
Your sitting position
Using Optional Equipment
In order to get the input signal of a connected equipment onto the TV screen, you need to select the symbol of the
connector to which you have connected the device.
e. g. : Your VCR is connected to the connector with the symbol
Y1/ 1. Press the button on the remote control
repeatedly until you see the symbol 1 on the screen.
1 Connect your equipment to the designated projection TV socket, as it is indicated on the previous
page.
2 Switch on the connected equipment.
3 To watch the picture of the connected equipment, press the button repeatedly until the
correct input symbol appears on the screen.
Symbol Input Signals
1 • Audio / video input signal through the Scart connector B
1 • RGB input signal through the Scart connector B. This symbol appears only if an RGB
source has been connected.
2 • Audio / video input signal through the Scart connector C.
2 • RGB input signal through the Scart connector C. This symbol appears only if an RGB
source has been connected.
3 • Audio/video input signal through the Scart connector D.
S
3 •S Video Input signal through the Scart connector D. This symbol appears only if an S
Video source has been connected.
4 • Video input signal through the phono socket F and Audio input signal through G.
S
4 •S Video Input signal through the front S Video input jack E and Audio signal through
G. This symbol appears only if an S Video source has been connected.
4 Press button on the remote control to return to the normal TV picture.
For mono equipment
Connect the phono plug to the L/G/S/I socket on the side of the TV and select 4 or 4 input
S
signal using the instructions above. Finally, refer to the “Sound Adjustment” section of this manual
and select “Dual Sound” “A” on the sound menu screen.
Additional Information
21
Right
Hi-Fi
speaker
Left
Hi-Fi
speaker
