Sony BRAVIA KDL-26S2000: instruction

2-684-953-41(1)

K

LCD Digital Colour TV

Operatin

GB

RU

PL

KDL-46S2000

KDL-46S2010

KDL-40S2000

KDL-40S2010

KDL-32S2000

KDL-32S2010

KDL-32S2020

KDL-26S2000

KDL-26S2010

KDL-26S2020

© 2006 Sony Corporation

Instructions

Before operating the TV, please read the “Safety

information” section of this manual.

Retain this manual for future reference.

Инструкция по эксплуатации

Перед включением телевизора прочтите раздел “Сведения

по безопасности” этого руководства.

Сохраняйте данное руководство для справок в будущем.

Instrukcja obsługi

Przed rozpoczęciem eksploatacji telewizora należy

zapoznać się z treścią rozdziału „Informacje dotyczące

bezpieczeństwa” niniejszej instrukcji.

Zachować instrukcję do wykorzystania w przyszłości.

For useful information about Sony products

Для получения полезной информации о продукции Сони

Szczegółowe informacje o produktach Sony

WARNING

Introduction

• To prevent the risk of electric shock, if the mains lead or

Thank you for choosing this Sony product.

plug is damaged, do not insert the plug into the mains

Before operating the TV, please read this manual

socket outlet. This plug cannot be used and should be

thoroughly and retain it for future reference.

destroyed.

• To prevent the risk of fire or electric shock, do not expose

Trademark information

the TV set to rain or moisture.

• Dangerously high voltages are present inside the TV set.

• is a registered trademark of the DVB Project

Do not open the cabinet. Refer servicing to qualified

• Manufactured under license from BBE Sound, Inc.

personnel only.

Licensed by BBE Sound, Inc. under one or more of the

following US patents: 5510752, 5736897. BBE and BBE

symbol are registered trademarks of BBE Sound, Inc.

Notice for Digital TV function

• TruSurround XT, SRS and (

z) symbol are trademarks of

SRS Labs, Inc.

• Any functions related to Digital TV ( ) will only

TruSurround XT technology is incorporated under license

work in countries or areas where DVB-T (MPEG2) digital

from SRS Labs, Inc.

terrestrial signals are broadcasted. Please confirm with

• HDMI, the HDMI logo and

your local dealer if you can receive a DVB-T signal where

High-Definition Multimedia

you live.

Interface are trademarks or registered trademarks of

• Although this TV set follows DVB-T specifications,

HDMI Licensing, LLC.

compatibility with future DVB-T digital terrestrial

broadcasts cannot be guaranteed.

• Some Digital TV functions may not be available in some

• The illustrations used in this manual are of the KDL-

countries.

32S2000/KDL-32S2010/KDL-32S2020 unless otherwise

state.

GB

2

Table of Contents

Start-up Guide 4

Safety information .....................................................................................................................7

Precautions .............................................................................................................................10

Overview of the remote ........................................................................................................11

Overview of the TV buttons and indicators ........................................................................12

Watching TV

Watching TV............................................................................................................................13

Checking the Digital Electronic Programme Guide (EPG) .............................................15

Using the Favourite list ..................................................................................................17

Viewing pictures from connected equipment ..........................................................................18

Using MENU Functions

Navigating through menus ......................................................................................................19

GB

Picture menu ...........................................................................................................................20

Sound menu............................................................................................................................22

Screen menu...........................................................................................................................24

Set-up menu............................................................................................................................25

PC Settings menu ...................................................................................................................27

Analogue Set-up menu (Analogue mode only) .......................................................................28

Digital Set-up menu .......................................................................................................31

Using Optional Equipment

Connecting optional equipment...............................................................................................33

Additional Information

Specifications ..........................................................................................................................36

Troubleshooting ......................................................................................................................38

Index .......................................................................................................................................40

: for digital channels only

GB

3

Start-up Guide

1: Checking the

2: Connecting an aerial/

accessories

VCR

Remote RM-ED005 (1)

Connecting an aerial only

Size AA batteries (R6 type) (2)

Coaxial cable

Mains lead (Type C-6) (1)

(supplied)

Coaxial cable (1)

Cable holder (1)

Mains lead (supplied)

Connecting an aerial and VCR

Support belt (1) and screws (2)

To insert batteries into the remote

Mains lead

(supplied)

RF lead

(not supplied)

Notes

• Observe the correct polarity when inserting batteries.

• Dispose of batteries in an environmentally friendly way.

Certain regions may regulate disposal of the battery.

Please consult your local authority.

• Do not use different types of batteries together or mix old

Scart lead (not supplied)

and new batteries.

• Handle the remote with care. Do not drop or step on it, or

spill liquid of any kind onto it.

• Do not place the remote in a location near a heat source, or

in a place subject to direct sunlight, or in a damp room.

VCR

GB

4

Start-up Guide

3: Bundling the cables

5: Selecting the

language and country/

region

2

1

2

4: Preventing the TV

3,4

from toppling over

3,4

1 Connect the TV to your mains socket (220-

240V AC, 50Hz).

2 Press 1 on the TV (top side).

When you switch on the TV for the first time, the

Language menu appears on the screen.

When the TV is in standby mode (the

1 (standby)

indicator on the TV (front) is red), press "/1 on

the remote to switch on the TV.

2

3

1

Continued

GB

5

3 Press F/f to select the language

1 Before you start auto-tuning the TV, insert

displayed on the menu screens, then press

a pre-recorded tape into the VCR

.

connected to the TV (page 4) and start play

back.

The video channel will be located and stored on

the TV during auto-tuning.

If no VCR is connected to the TV, this procedure

is not required. Go to step 2.

2 Select “OK”, then press .

4 Press F/f to select the country/region in

which you will operate the TV, then press

The TV starts searching for all available digital

.

channels, followed by all available analogue

channels. This may take some time, please be

patient and do not press any buttons on the TV or

remote.

If a message appears for you to confirm the aerial

connections

No digital or analogue channels were found.

Check all the aerial connections and press to

start auto-tuning again.

3 When the Programme Sorting menu

appears on the screen, follow the steps of

“Programme Sorting” (page 28).

If you do not wish to change the order in which the

If the country/region in which you want to use the

analogue channels are stored on the TV, go to step

TV does not appear in the list, select “-” instead of

4.

a country/region.

The message confirming the TV start auto-tuning

4 Press MENU to exit.

appears on the screen, then go to “6: Auto-tuning

The TV has now tuned in all the available

the TV”.

channels.

6: Auto-tuning the TV

The TV will now search for and store all available TV

channels.

2

4

GB

6

• It is strongly recommended that you use Sony accessories

for safety reasons:

Safety information

– KDL-46S2000/KDL-46S2010/KDL-40S2000/

KDL-40S2010:

Wall-mount bracket SU-WL51

Mains lead

– KDL-32S2000/KDL-32S2010/KDL-32S2020/

• Unplug the mains lead

KDL-26S2000/KDL-26S2010/KDL-26S2020:

when moving the TV

Wall-mount bracket SU-WL31

set. Do not move the

• It is strongly recommended that you use the official Sony

TV set with the mains

wall-mount bracket to allow adequate air circulation and

lead plugged in. It may

to avoid dust build up around the TV, wall and ceiling.

damage the mains lead

• Secure the TV set properly, following the instructions

and result in fire or electric shock.

supplied with your wall-mount bracket when installing the

• If you damage the mains lead, it may

TV set.

result in fire or electric shock.

– Do not pinch, bend, or twist the

Installation

mains lead excessively. The core

• If the TV set is to be installed on

conductors may be exposed or

a wall, have the installation

broken, causing a short-circuit,

carried out by qualified service

which may cause fire or electric

men. Improper installation may

shock.

render the TV set unsafe.

– Do not modify or damage the mains

• The TV should be installed near

lead.

an easily accessible mains socket.

– Do not put anything heavy on the

Medical institutions

mains lead. Do not pull the mains

lead.

Do not place this TV set in a place

– Keep the mains lead away from heat sources.

where medical equipment is in

– Be sure to grasp the plug when disconnecting the mains

use. It may cause malfunction of

lead.

medical instruments.

• If the mains lead is damaged, stop using it and ask your

dealer or Sony service centre to exchange it.

Carrying

• Do not use the supplied mains lead on any other

• Before carrying the TV set, disconnect

equipment.

all the cables from the TV set.

• Use only an original Sony mains lead, not other brands.

• When you carry the TV set by hand,

Mains lead/cable protection

hold the TV set as illustrated on the

Pull out the mains lead/cable by

right. If you do not do so, the TV set

the plug. Do not pull on the mains

may fall and be damaged or cause

lead/cable itself.

serious injury. If the TV set has been

dropped or damaged, have it checked

immediately by qualified service

Mains

personnel.

• When transporting it, do not subject the

Do not use a poor fitting mains socket. Insert

TV set to jolts or excessive vibration. The TV set may fall

the plug fully into the mains socket. A poor

and be damaged or cause serious injury.

fit may cause arcing and result in fire.

• When you carry the TV set in for repair or when you move

Contact your electrician to have the mains

it, pack it using the original carton and packing material.

socket changed.

• Carrying the TV set requires two or more people.

For the TV set with a three-wire

Ventilation

grounding type AC mains plug

• Never cover the ventilation

This TV set must be connected to an AC mains socket with a

holes in the cabinet. It may

protective earthing connection.

cause overheating and result in

Optional accessories

fire.

Observe the following when installing the

• Unless proper ventilation is provided, the TV set may

TV set using a wall-mount bracket. If you do

gather dust and get dirty. For proper ventilation, observe

not do so, the TV set may fall and cause

the following:

serious injury.

– Do not install the TV set turned backwards or sideways.

– Do not install the TV set turned over or upside down.

– Do not install the TV set on a shelf or in a closet.

– Do not place the TV set on a rug or bed.

– Do not cover the TV set with cloth, such as curtains, or

items such as newspapers, etc.

Continued

GB

7

• Leave some space around the TV set. Otherwise, air-

• Do not touch the mains lead and the TV

circulation may be inadequate and cause overheating,

set with wet hands. Doing so may cause

which may cause fire or damage to the TV set.

electric shock or damage to the TV set.

30 cm

10 cm 10 cm 15 cm

Moisture and flammable objects

• Do not let this TV set get wet. Never

spill liquid of any kind on the TV set.

If any liquid or solid object does fall

through openings in the cabinet, do

not operate the TV set. It may result in

electric shock or damage to the TV set.

Leave at least this much space.

Have it checked immediately by

qualified service personnel.

• When installing the TV set on the wall, leave at least

• To prevent fire, keep flammable objects (candles, etc.) and

10 cm space from the bottom, and at least 5.5 cm between

electric bulbs away from the TV set.

the back of the TV set and the wall.

• Never install the TV set as follows:

Oils

Air circulation

Air circulation

Do not install this TV set in restaurants that use oil. Dust

is blocked.

is blocked.

absorbing oil may enter and damage the TV set.

Fall

Place the TV set on a secure, stable stand. Do

not hang anything on the TV set. If you do,

the TV set may fall from the stand or wall-

mount bracket, causing damage or serious

Wall Wall

injury.

Do not allow children to climb on the TV set.

Vehicle or ceiling

Do not install this TV set in a

vehicle. The motion of the vehicle

may cause the TV set to fall down

and cause injury. Do not hang this

Ventilation holes

TV set from the ceiling.

Do not insert anything in the ventilation

Ships and other vessels

holes. If metal or liquid is inserted in these

Do not install this TV set on a ship

holes, it may result in fire or electric shock.

or other vessel. If the TV set is

exposed to seawater, it may cause

fire or damage the TV set.

Placement

• Never place the TV set in hot, humid

Outdoor use

or excessively dusty places.

• Do not expose the TV set to

• Do not install the TV set where

direct sunlight. The TV set may

insects may enter.

heat up and this may result in

• Do not install the TV set where it

damage to the TV set.

may be exposed to mechanical vibration.

• Do not install this TV set

• Place the TV set on a stable, level surface.

outdoors.

Otherwise, the TV set may fall and cause

Wiring

injury.

• Do not install the TV set in a location

• Unplug the mains lead when wiring cables. When hooking

where it may protrude, such as on or

up, be sure to unplug the mains lead for your safety.

behind a pillar, or where you might bump

• Take care not to catch your feet on the cables. It may

your head on it. Otherwise, it may result

damage the TV set.

in injury.

Cleaning

Water and moisture

• Unplug the mains lead when cleaning the

• Do not use this TV set near water

mains plug and this TV set. If you do not,

– for example, near a bathtub or

it may result in electric shock.

shower room. Also do not expose

• Clean the mains plug regularly. If the

to rain, moisture or smoke. This

plug is covered with dust and it picks up

may result in fire or electric shock.

moisture, its insulation may deteriorate

and result in fire.

GB

8

Lightning storms

Corrosion

For your own safety, do not touch any

If you use this TV set near the seashore, salt may corrode

part of the TV set, mains lead, or

metal parts of the TV set and cause internal damage or fire.

aerial lead during lightning storms.

It may also shorten the life of the TV set. Steps should be

taken to reduce the humidity and moderate the temperature

Damage requiring service

of the area where the TV set is located.

If the surface of the TV set cracks, do not touch it until you

have unplugged the mains lead. Otherwise electric shock

Handling

may result.

• When lifting the TV set or moving the

panel of the TV set, hold it firmly from the

Servicing

bottom.

Do not open the cabinet. Entrust the

TV set to qualified service personnel

only.

• For the KDL-46S2000/

Small accessories removal and

KDL-46S2010, when lifting or

fittable

moving the TV, be sure to hold the

Keep accessories out of children’s reach. If they are

panel firmly as illustrated. Place your

swallowed, choking or suffocation may occur. Call a doctor

palm directly under the panel, from

immediately.

the rear of the TV.

Broken pieces

Do not throw anything at the TV set. The

screen glass may break by the impact and

cause serious injury.

When not in use

For environmental and safety

reasons, it is recommended that

the TV set is not left in standby

when unused. Disconnect from

the mains. However, some TV

sets may have features which need the TV set to be left in

standby to work correctly. The instructions in this manual

will inform you if this applies.

Viewing the TV

• To view the TV comfortably, the recommended viewing

position is from four to seven times the screen’s vertical

length away from the TV set.

• View the TV in moderate light, as viewing the TV in poor

light strains your eyes. Watching the screen continuously

for long periods of time can also strain your eyes.

• If the angle of the TV set is to be adjusted, steady the base

of the stand with your hand to prevent the TV set from

becoming separated from the stand. Be careful not to get

your fingers caught between the TV set and the stand.

Volume adjustment

• Adjust the volume so as not to trouble your neighbours.

Sound carries very easily at night time. Therefore, closing

the windows or using headphones is suggested.

• When using headphones, adjust the volume so as to avoid

excessive levels, as hearing damage may result.

Overloading

This TV set is designed to operate on

a 220–240 V AC supply only. Take

care not to connect too many

appliances to the same mains socket

as this could result in fire or electric

shock.

Heat

Do not touch the surface of the TV set. It remains hot, even

after the TV set has been turned off for some time.

GB

9